Alternate Fan Lid for Raspberry Pi 4 Model (by JayCee09)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustment of JayCee09's Raspberry Pi 4 case lid to facilitate addition of fan (and make use of build plate texture).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I removed the 3D print logo and added an opening for a fan that is located directly above the Raspberry Pi 4 and underneath the lid. To make the preferably 2.5 mm (or 3 mm, with adjustments) bolts/screws not pop out the top, I also added extra material on the underside of the lid. I personally enjoy having a finger tab on both ends, so it may look like it is flipped, but this can be easily adjusted in the .STEP files. The fan I used was extracted from an old raspberry pi CM4 cooling module (this one). Print on the face without the raised plastic to make use of build plate textures! Note that the picture shows holes through the lid - I had to drill the holes out larger because I forgot to add in fillets for the screw holes, which are now in the model.
Recommended materials:
M3 x 8 (or 10) bolts/screws
M2.5 x 8 (or 10) would also work, and may fit better.