Birel spindle wrench alignment adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aligns the wrench for the spindle nut on Birel karts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I think Birel has different thickness spindles, so measure yours. Mine was 20.3 mm ID and the model is 20.1 mm. Fits perfectly. If yours is significantly different, send a message and I'll help out.
I slightly oversized the larger section, but those relief cuts allow it to squish down for a gentle interference fit.
Obviously the easiest way to print this is also the weakest against snapping it off. To counter this the through-hole provides for another section of walls. I used 4 walls and 20% infill, but you will know your printer and material best. Printed in PETG since it will be out in the sun sometimes.
If you're happy with my work consider buying me a coffee for just $1. Small gestures give more motivation than you might think. https://www.buymeacoffee.com/FastLaneEngineer