Birel spindle wrench alignment adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aligns the wrench for the spindle nut on Birel karts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I think Birel has different thickness spindles, so measure yours. Mine was 20.3 mm ID and the model is 20.1 mm. Fits perfectly. If yours is significantly different, send a message and I'll help out.
I slightly oversized the larger section, but those relief cuts allow it to squish down for a gentle interference fit.
Obviously the easiest way to print this is also the weakest against snapping it off. To counter this the through-hole provides for another section of walls. I used 4 walls and 20% infill, but you will know your printer and material best. Printed in PETG since it will be out in the sun sometimes.
If you're happy with my work consider buying me a coffee for just $1. Small gestures give more motivation than you might think. https://www.buymeacoffee.com/FastLaneEngineer