Dragon Burner SV08
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pieces to use Sovol SV08 extruder mechanics and electronics with Dragon Burner toolhead
- Rating
- 5 / 5
- Likes
- 168
- Downloads
- 580
- Makes
- 3
- Views
- 9,229
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Update 01/10/2024 :
- Updated cowl
- To make printing easier and accomodate shrinkage, I've added three motor plate models : 100 %, 101% and 102% . You have to print it at 100 % in your slicer as the models have already been enlarged.
- Update 21/08/2024 :
- Extruder mount alignment slightly corrected (new file : Dragon_SV08_extruder_mount_v2.STL)
Pieces to use Sovol SV08 extruder mechanics and electronics with Dragon Burner toolhead. So everything compatible with Dragon Burner Toolhead can be use on the Sovol SV08.
The cowl has a small slot to pass the heat plate and thermistor wires.
Thank you to the Dragon Burner's creator :
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
WARNING:
- This models are in test. Be free to do feedback
- The motor plate has to be printed very precisely with 100% infill
- Every pieces have really tight tolerances, so a good calibrated printer and profile is prefered. You can look at the dragon burner's printed recommendations.
- ASA or ABS is recommended
BOM:
- To mount the SV08 extruder to the Dragon extruder (Dragon_SV08_extruder_mount.STL) :
- 2 M3 x 20
- 2 M3 x 4 heat insert
- To secure the motor plate inside the carriage mount:
- 1 M3 x 20
- For everything else, you have to use the Dragon Burner BOM