Dragon Burner SV08
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pieces to use Sovol SV08 extruder mechanics and electronics with Dragon Burner toolhead
- Ocena
- 5 / 5
- Polubienia
- 168
- Pobrania
- 580
- Wydruki
- 3
- Wyświetlenia
- 9229
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- Update 01/10/2024 :
- Updated cowl
- To make printing easier and accomodate shrinkage, I've added three motor plate models : 100 %, 101% and 102% . You have to print it at 100 % in your slicer as the models have already been enlarged.
- Update 21/08/2024 :
- Extruder mount alignment slightly corrected (new file : Dragon_SV08_extruder_mount_v2.STL)
Pieces to use Sovol SV08 extruder mechanics and electronics with Dragon Burner toolhead. So everything compatible with Dragon Burner Toolhead can be use on the Sovol SV08.
The cowl has a small slot to pass the heat plate and thermistor wires.
Thank you to the Dragon Burner's creator :
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
WARNING:
- This models are in test. Be free to do feedback
- The motor plate has to be printed very precisely with 100% infill
- Every pieces have really tight tolerances, so a good calibrated printer and profile is prefered. You can look at the dragon burner's printed recommendations.
- ASA or ABS is recommended
BOM:
- To mount the SV08 extruder to the Dragon extruder (Dragon_SV08_extruder_mount.STL) :
- 2 M3 x 20
- 2 M3 x 4 heat insert
- To secure the motor plate inside the carriage mount:
- 1 M3 x 20
- For everything else, you have to use the Dragon Burner BOM