1 / 6
Self Centering Door Latch Jig (replaceable insert) v2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just place it over a door knob Latch hole, clamp in place and use a router to get perfectly mortised latch plates!
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 355
- Makes
- 0
- Views
- 1,537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an updated version of my self centering door latch jig. It has a replaceable insert that can be popped out and replaced if you accidentally catch it with the router bit. I also included a depth stop to set the router.
Required Hardware
- (2x) M3x12 screws
- (4x) M3x20 screws
- (6x) M3 Nuts
Print in whatever material you like, i did mine in ABS but it should work with almost any filament. Using a ½ inch Bit will work for rounded corner plates. then you just need to chisel out corners for square.
Links to other required things