1 / 5
LM8UU Superlube Grease Linear Bearing Lubricator — image 1
1 / 5

LM8UU Superlube Grease Linear Bearing Lubricator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the LMU Bearing Grease Packer with a strong 8mm nut on the end to hold the bearing in place

Rating
5 / 5
Likes
9
Downloads
78
Makes
2
Views
559
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a remix of the LMU Bearing Grease Packer with a nut on the end to firmly hold the bearing while packing it with grease. 

While I liked the design, I had some frustration with the 4mm thread, finally cross-threading it.

I copied the existing design of the Superlube tube thread.

The lubricator worked well on 10 x LM8UU bearing for my MK3.

Some patience is required as the Superlube take a little time to find its way all the way through.

I found that 6 x 10 seconds firm squeeze sessions were required to complete the lubrication.

After reading a comment that a Superlube tube had sprung a leak at the base of the tube, I squeezed from the base of the tube and worked upwards.

10 bearings appeared to use approximately 20% of the grease in the tube as can be seen in the photo of the tube after lubricating 10 bearings.

I printed these in PETG, 0.15mm, 20% infill,but any standard print should work.

STEP files are provided for anyone wanting to tweak the design. 

 

Tags