115 models
A wide-mouthed pill packer bottle with threaded cap. Packers are often used for storing pills, capsules, supplements, powders, and other health-related products. This model uses a simple smooth shape for the outside so that you can…
This multi-function workshop packer is designed as a compact, low-filament consumable for everyday workshop use. It combines several common tools into a single print, making it ideal for quick jobs, setup work, and using up the last part…
I have released a new, better and more modular version of this packer. Details: This packer fits 16 of the 1-¼" RAW cones and allows you to fill all 16 at once. Printed on the Bambu Labs X1C in the default orientation with tree supports…
Green Bay Packers Logo 1st Yellow 2nd Green 3rd White
Push stick and Packing funnel. Push stick is also a cone rolling guide for papers. print horizontally flat on the print bed. Enjoy.
A simple shovel for all your scooping and packing needs! The front is a shovel to scoop your “herbs” and the rear is a flat packing tool to pack it down.
Greenbay Packers Football Helmet. Having a hard time curving symbol to curve of helmet in blender. Used the modifiers that would apply ... but could not get it right. If you have any good advice, I'll take it. GBhelmet2 is my second…
I really liked the design by @ColtonDick_376020 of the 16x RAW cone packer found here: https://www.printables.com/model/511085-16x-raw-cone-packer-1-14 , but it didn't come with a riser to allow you to pack the cones without holding the…
Small Tool with a poking stick on one side and a mini-shovel on the other side. ---- Available in two versions: Short - 75mm Long - 100mm Print Settings Printer brand: Creality Printer: K1 Max Rafts: No Supports: No Resolution: Any…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
A logo stand for the NFL Team Greenbay Packers! I've made two versions: Single Color Modell (or MMU but unpainted) Multicolor Modell by Layershift You will need Support - But thats realy easy. Maybe i will ad a two part version.
This keychain is modeled after a genuine Green Bay Packers Foam Cheesehead. It is scaled down to 1.5 inches with a hole added for a standard #3 ball chain, 3/32" (2.4 mm) ball diameter. The same chain used by the US military for their dog…
Simple Go Pack Go sign. The three pieces were glued together with 5 minute epoxy but hot glue would work as well. Small detents help with guiding the models together when gluing. Printed in Prusament Mango Yellow and Jungle Green PETG on…
Funnel to fill your DI canisters with a packing/ pusher to help get the Resin packed tight
Green Bay Packers Fun Cheese Crown Cheeseheads, take your game-day gear to the next level with this Green Bay Packers Fun Cheese Crown! A playful twist on the classic cheesehead, this 3D-printed crown combines team spirit with…
Color sequence is as follows green, white, yellow.
If you like my designs, please consider using the "tip designer" button and help support my continued effort to bring you new, useful and interesting things. update with a new M4 cap and the 14x1.5 threaded for Super LubeTubes New Cap can…
Designed this for an uncle that's a passionate Packers Fan. Go Pack Go! Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Filament: Hatchbox PLA Notes: Filament swap from yellow to green to white. Category:…
Modified to fit the super lube grease threads a little better and fit the LM8LUU. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA Category: 3D Printer…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is a partial remix of and inspired by u/along_for_the_ride11 's awesome BAK-1 100 Round Holder for Magpul Backpacker X22 that I purchased from them. I have received permission from them to share my variant. Please see HERE to…
Remix on a remix , used for packing the 53 mm or stubby or dog walker joints from Blazy Susan. Not the prettiest, but she fits real good like. Ayyyuup. Post any comments, concerns, or makes k thnx bye. <3 Standard .2 layer height works…
Green Bay logo I created in Fusion 360 for my helmet. I manually changed the filament to change the color. you could also split in the slicer and glue it. Helmet: https://www.printables.com/model/257161 Print Settings Printer: Custom…
Packers Coaster. 3 Levels, first White, second Gold, top layer Green.
attempted to optimize the Snowball Maker for 0.6mm nozzle while minimizing PLA filament use 12/21/2022 printed successfully on Mk3 with perfect snap-fit on first attempt, with 0.15mm layers
Cheese Ring – The Ultimate Cheesy Accessory! Whether you're a proud Packers fan or just a lover of all things cheesy, this 3D-printed Cheese Ring is the perfect playful accessory! Shaped like a tiny wedge of Swiss cheese wrapped around…
This is a very simple miniature cheesehead that is designed to be worn by your thumb. The cheese has a lot of holes, but there is no need for any special print settings or supports, it should print just fine. UPDATED VERSION:…
Green Bay Packers Oversized Necklace Logo that I designed. I hope you enjoy!
Holder for beer can or something with a light inside… on the photos the print is wet, so print quality may seem abit off, but its waterdrops on the pics.
Converted the source file to one that will work on an MMU.
The larger caps DON'T fit yet (might try printing at 105%)/ haven't printed the smaller cap (customer ended up not wanting caps so probably not going to fix) (Commissioned Item) Cone packer 1 1/4 Designed under side of lid with the idea…
Previously this was a Makerworld Exclusive model, but I've decided to leave the program to offer the model on other platforms. I'm happy to release the latest version of the cone packing jig. I've dubbed this the Doobloader and it's aimed…
This is a round light box with a wall hanger for all the Green Bay Packers fans out there. You can add LED strips inside to make it a light up display as well! There is a pre-painted Bambu 3mf included, so you don't need to paint it…
3 Levels, Gold, Green, White. Enjoy! Use as a plaque or coaster… whatever you like. Go Packers, and f*@k the Bears.
I made second version of the handle with knurled outer surface to help removing it after use. However, I'm struggling with the threads, since my modelling software doesn't support thread modelling, only textures. Had to use the coil…
This packer allows you to raise the cheek piece on the any Sako TRG rifle by 3 mm. The TRG 42 cheek piece can be raise by 2 of these before the cheek piece interferes with the action of the bolt. No idea if the problem occurs in the TRG…
Replacement cap for a tube of White Lithium Grease with an M10x1.5 screw fitting. Fusion 360 link in case you want to edit it: https://a360.co/2D8yNpR Link to tube that works with this: https://www.amazon.com/gp/product/B000HBNV58 Print…
Simple coaster with logo. The gaps are 0,15 mm so they should fit with a good tuned printer. You can print the parts with 0,1 to 0,2 mm layerheight. The inlay parts should be printet without brim and glued into the coaster with superglue…
Printer brand: Anet Printer: AM8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament brand: Prusament Filament material: PETG
Didn't want to buy a big box of 100 Window Packers; when I only needed about 6 to get a job done. So I printed my own instead. There is 1.5mm, 3.2mm, 6.4mm, 5mm & 10mm thicknesses to choose from. Print Settings Printer Brand: Anet…
The plate is to help with the canister packing by helping ensure a good solid pack while helping minimize the amount of sorb that gets trapped in the canister lid threads.
A 3D-printed Green Bay Packers license plate featuring Jordan Love's number 10 is a fantastic way for fans to celebrate the team's promising quarterback. This custom license plate can be designed with the Packers' iconic green and gold…
Here is a great gift or personal treat: Green Bay Packers Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print is…
Green Bay Packers Coaster Set
Pvc window packer, used to support the double glazed unit inside the frame 6mm and 4mm 30mmx100mm Print in PLA or whatever is handy!
I always keep a few large bills hidden away for emergencies in case of theft/loss of my wallet when backpacking in foreign countries. The trick of hiding money has always been in not hiding it in something that was as likely to be taken…
This Packers Superbowl ring is best printed in generic PLA or PETG. It prints small, so you will have to resize it to fit your finger. (The inside of the ring measures 1.5 cm when you first import it.) If you just increase the uniform…
This is an Ammo Box for the Ruger 10-22 Backpacker Stock. It is designed to fit inside the stock where the 2 back magazines and divider go. There is no need to modify your existing backpacker stock or use the cheek riser. This will hold…
www.patreon.com/bkprint3d
You'll need to print the original cap as well as this.
An ergonomic BIC bowl packer that extends the length of the lighter to comfortably hold and not worry about touching the ashy end. +.2mm tolerance Category: Hand Tools
In the spirit of the new football season, and to keep the peace with my Green Bay loving wife, I have created yet another NFL logo magnet. I hope many packers fans print their fandom as well!
5cm tool for picking, poking and packing. Category: Hand Tools
Remix to use Luer Lok Tip Syringes for the grease injection and M3 hex type screws. The variants are for: LM8UU, LM10UU, LM10LUU, LM12UU and LM12LUU. Not all print tested yet. Updated to M3 screw and increased the syringe fit diameter…
I am mounting a Rubbermaid Action packer in the bed of my Polaris RZR. It sits under a hinged spare tire carrier and in front of a soft cooler, so access to it will be limited. I needed to put the lid on hinges and come up with a method…
To allow for a faster setup and wrap up, it is tempting to leave the pier head attached to the mount, and leave the pier attached to the tripod. But that leaves the three thumbscrews potentially loose and exposed. The TopPack_V2 (white)…
Needed a way to attach a sling to my Ruger 10/22 with the Magpul x22 Backpacker stock. I did not want to pay for Magpul hardware so I designed my own. Uses one m3 or m4 screw. I don't remember the length and can't take mine out at the…
Packer for BudKup. Try if BudKup fits by printing packer_budkup_template first. Scale accordingly. Fusion360 model included.
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
Zweiteiliges Schutzgehäuse für den Thermacell Backpacker Mückenschutz. Deckel und Boden separat druckbar, Einschub für den ON/OFF-Schieber. Passgenaues Innenmaß hält das Gerät sicher Platz für mindestens 3 Ersatzplättchen im unteren…
A simple bead used on a pace cord. Typical setup is 14 beads, 9 for 100m marks and 4 for 1000m marks. Proper tension is held on the bead when used with two lengths of 550 (4mm) paracord passed through the center with the center strands of…
Green Bay Packers Oversized logo
I recomend to print it in PETG and clean it manually every use, do not use dishwasher. Be generous on perimeters and top and bottom layers.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Overture Black Transmission Distance: 0.6 PLA Coex Green Bay Green Transmission Distance: 1.5 PLA Overture Space Gray Transmission…
Model has slots for 8mm x 3mm round magnets. I used these magnets from Amazon: https://amzn.to/4ft5tu8 The flush text version is only available on my MakerWorld Page: https://makerworld.com/en/models/664353#profileId-591685 Glue is not…
Hint for printing: Use some kind of support for the flat surface on the inside of the cap - at least around the hole in the center. Else the hole will not come out clean (main tunnel for the grease).
Sling mount for the Magpul X22 backpacker chassis. Use an m5 screw of your choice to secure mount to hole. Print on it's side with supports and a .4 nozzle or smaller.
Two NFL team logo magnets from my local area. Each one is made to waste as little filament as possible which is why the solid backing. If you'd like to help me out or have permission to sell physical items from my designs, please join my…
Green Bay Packers Keychain print in PLA. The color change from white to yellow occurs at 2.5mm and the color change from yellow to green occurs at 3mm.
This is Remix of The Salt & Pepper Backpacker by Infocus. I added the following: -Added a larger interior space to store more spice -Created a screw top funnel for easy loading -Went away from the cap lock and made them magnetic. -Made…
this was printed on an ender 3pro. joints need to glued together or you can do what I did and melt them together with a soldering iron. the logo is 15 inches tall and 21 1/2 at its widest. the bottom center section has holes to get your…
Just a little local team Remix of this soap dish. No Supports!
I built this stand after seeing mention of using an airhorn as an isobutane canistor for an ultralight backpacking stove on youtube, then found this BPL Instagram post and BPL post , and wanted to give designing the stand a shot! Later in…
The Green Bay Packers version of my Yin Yang Cribbage Board. I designed it symmetrical so one half printed twice fits together with a diagonal twist for a full board. This is a multicolor print model. Together the two halves have 3 tracks…
DI Resin tamping/packing tool (with comfort handle) that is NOT a uni-tasker, perfect for getting all the air pockets out and getting as much resin into the chamber as possible. Also useful for getting air out of other things. Finger…
On OnShape Here . Highly customizable using the “Variables Table” in OnShape. The bags came from AliExpress ($1.11usd for 100, I used the 8x10cm bags) “100Pcs Plant Grow Bags Nursery Bags Seeds To Sow Flower Pots Biodegradable Non-woven…
Green Bay Packers Coaster Bierdeckel Beer Mats For 6 Coaster Bierdeckel Beer Mats I have remixed this original model with permission of the owner. https://www.printables.com/model/1246950-bober-kurwa-beer-coasterbierdeckelbeer-mats
If you want to glue or double tape your Dyson dock to the wall these packers increase the surface area you have for adhesion. They can be glued in with superglue, the dock can then be fitted to the wall with liquid nails or mounting tape.…
The space above the capsules is wide enough for spreading with a Standard ISO-Card.
For all the Green Bay Packers fans. Category: 3D Printing
Just a Greenbay Packers logo for you Keychains!
I needed a way to lube my new bearings, and hopefully without making a huge mess and wasting allot of lube. So, I made this with the idea that if I had two solid parts that pressed together. I wouldn't waste any leftover lube inside the…
I've printed the first version I've uploaded but there was some mistakes and assembly was hard. So I've made a few change and reuploaded all the files. This should be good now. All the ZZ part is for cutted part to fit small bed. Should…
Show off your Green Bay football pride while saving your fingernails with this Green Bay Packers-inspired Nail Saver Can Opener. This 3D printable tool is designed to slide under the pull tab of soda cans, energy drinks, and other canned…
Recreated with threads for Biltema PTFE Grease Art.nr. 27-0605 Category: 3D Printer Accessories
A Rope packer with a key chain hook and a hole to put the 2 ends of the rope through.
Rear bag height adjuster for Protektor Bunny Ear Rear Bag w Hard Bottom 14A or similar size bags. These packing blocks interlock to give a firm base for the rear bag when the bag is not tall enough for the front rest. Print Settings…
Disclaimer! One user printed this and said it was too small for their two backpackers. It's possible that backpackers have different sizes or shapes, or also possible that this model is the wrong size. Verify fit before printing with…
This is a holder for the scrapers from Sketch Me Too that will mount onto a Honeycomb Storage Wall.
DISC golf, not FRISBEE golf.
Simple tool for pushing down that silicone boot into a weather pack connector.
Z Axis Anti-Rotation Packer\Wedge for the Zonestar P802QR2 Wow, that's a mouthful. Basically due to the design of the stepper motor mounting tab when tension is applied to the X axis drive belt the Z axis stepper motor rotates off the…
Discover the charm of this adorable hooded mouse figurine that brings whimsical personality to any 3D printing collection! This detailed STL model features a cute rodent character wearing an oversized hoodie with prominent ears, perfect…
Grease Packer for 608 bearings. Remodelled it to work with Mini Grease Gun. I also used a 10x2 O-ring. Changed the thread a bit as well as it was too tight.
A green bay packers ornament with a large ring and slight extension for single color printers.
I use plastic packers (or shims) quite often, but it always pained me to find them off a plastic bag. So I spent some time and created a simple organiser. This model is for 32x100mm packers, but it would be very easy to modify to fit…
