1 / 4
Sovol Sv07+ filament sensor to extruder relocation + m10 PTFE fitting — image 1
1 / 4

Sovol Sv07+ filament sensor to extruder relocation + m10 PTFE fitting

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Can be used to mount the filament sensor to the extruder if you want to use my filament guide or use a PTFE tube

Rating
0 / 5
Likes
12
Downloads
81
Makes
0
Views
424
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

When printing put small supports under the screw holes. For the relocation you can route the original sensor cable or you can make your own small adapter that uses the port on the extruder. I had only one JST XH 3pin connector but you need two to make the adapter so i found a STL for the pin on thingiverse and printed the other because i had hard time finding them. In the Config file for the SV07+ under the [filament_switch_sensor my_sensor] i had to change the filament sensor pin from PD11 to PB0. The PTFE fitting hole might need to be shaped with a knife.

Tags