XF Mount Lockable Lens
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.16 – €1.41 net (excluding VAT)
For file: LockableLensCap_SingleHook_Complete_0.4n_0.2mm_PETG_MK4IS_1h9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.28 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Lockable Lens Cap is a durable, 3D-printed accessory that allows for quick, on the fly, lens changes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
Introduction
The Lockable Lens Cap is an unique camera accessory designed to streamline the process of changing camera lenses, particularly in outdoor and travel settings. This lens cap is engineered for photographers who are frequently on the move; it combines a secure twist-lock mechanism with a user-friendly latch, ensuring lenses remain protected while allowing for quick and easy access.
The cap can be customized with either a nylon cord or steel D-ring for versatile attachment options. The Lockable Lens Cap offers a practical solution for photographers looking to reduce bulk and maximize efficiency during their adventures.
Printing/Assembly Instructions:
This assembly uses a print pausing technique to avoid needing to print overhangs and undesirable underside surface finishes. No supports needed for any parts except the “Release”.
I recommend printing the “XF_LensCap_Bottom1” and “XF_LensCap_(DualHook or SingleHook)Bottom2” at the same time. Pause the print for the “Bottom2” part as shown in the attached screenshot, right as the overhangs are about to form. Then carefully remove the “Bottom1” part and insert it into the “Bottom2” part; ensure that the notches align properly and that the chamfered side for the inserted part is face down. Then resume the print and let the two parts become merged together.
I included the .gcode files for PETG parts; I recommend printing the parts using PETG.
Links
Here is a link to read more: https://www.behance.net/gallery/206646855/Lockable-Lens-Cap
Link to the screws I used: https://www.mcmaster.com/catalog/130/3421/90485A442