Sanding Block / Sanding Tool with Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small simple sanding block with a handle for a more ergonomic grip to sand small parts.
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 221
- Makes
- 0
- Views
- 1,335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Small simple tool to sand small parts. Dimensions: 100mm x 50mm x 40mm.
The handle provides a more ergonomic grip and skewed sides allow it to reach narrow parts or sharp inner corners.
Instructions
Requires non-3D printed parts:
1x M5 Screw with low profile cap (15-27mm long)
1x M5 Nut
Despite it can be printed without supports I would recommend using a small support for the hole in the base part.
Print all three parts. Put M5 nut inside the printed “Nut” part. Place “Nut” inside “Handle” making sure that metal nut is on top. Put the screw through the hole at the bottom of “Base”, then through “Handle” with “Nut”. Turn the “Nut” until it will be tighten enough.
If you like my designs and find them useful you can support me by buying me a coffee here buymeacoffee.com/dead.pixel or here ko-fi.com/dead_pixel . Thank you!