Flex Cuff 100mm | 4 in Fitting Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter that connects fittings to a pipe for a 4 inch (100 mm) dust collection system.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
The purpose of the adapter is to connect a fitting to a pipe for a 4 inch (100 mm) system. Parts are used for my dust collection system. I wanted an adapter that tapered down from the fitting to the pipe to create a tighter seal. Dimensions provided below:
| Description | inches | mm |
| outer diameter pipe end | 4.252 | 108.0 |
| outer diameter fitting end | 4.094 | 104.0 |
| height | 2.283 | 58.0 |
| wall thickness | 0.079 | 2.0 |
I use a Qidi X Max printer, and my print settings can be seen below:
| material | TPU (Overture) |
| print speed | 30 mm/s |
| travel speed | 50 mm/s |
| print temp | 220 C |
| build plate temp | 30 C |
| fan speed | 20 % |
I tried increasing the print speed, but anything above 30 mm/s failed. Keep the speed low and print temp high.
I have printed several of these adapters, and they have really helped with sealing and support. The pipe end always needs a clamp, but the fitting end seals well without a clamp if there is wall support further down the line. If the fitting end is free hanging with additional weight a clamp will be necessary.
Considering that these flex cuffs/adapters average $10/unit, I am saving money by printing these at around $1.50 or 45g of filament per unit. The only downside is the 9 hour print. Hope it helps!
