1 / 3
Flex Cuff 100mm | 4 in Fitting Adapter — zdjęcie 1
1 / 3

Flex Cuff 100mm | 4 in Fitting Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter that connects fittings to a pipe for a 4 inch (100 mm) dust collection system.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Public Domain

The purpose of the adapter is to connect a fitting to a pipe for a 4 inch (100 mm) system. Parts are used for my dust collection system. I wanted an adapter that tapered down from the fitting to the pipe to create a tighter seal. Dimensions provided below:

Descriptioninchesmm
outer diameter pipe end4.252108.0
outer diameter fitting end4.094104.0
height2.28358.0
wall thickness0.0792.0

I use a Qidi X Max printer, and my print settings can be seen below:

materialTPU (Overture)
print speed30 mm/s
travel speed50 mm/s
print temp220 C
build plate temp30 C
fan speed20 %

I tried increasing the print speed, but anything above 30 mm/s failed. Keep the speed low and print temp high. 

I have printed several of these adapters, and they have really helped with sealing and support. The pipe end always needs a clamp, but the fitting end seals well without a clamp if there is wall support further down the line. If the fitting end is free hanging with additional weight a clamp will be necessary. 

Considering that these flex cuffs/adapters average $10/unit, I am saving money by printing these at around $1.50 or 45g of filament per unit. The only downside is the 9 hour print. Hope it helps!

Tagi