Amazon Echo Pop Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Echo Pop Wall Mount Channels the cable down the wall and fits snug around the base of the speaker to prevent any wobble
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 329
- Makes
- 2
- Views
- 1,546
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was designed for my specific use case where we use a Fire TV stick and Amazon Echo Pops as a 2.0 Surround sound for our projector.
We don't have a TV Unit in front of our bed, so to elevate these speakers to head height in bed, I thought the best way would be to wall mount them. There are options for this online, but they are absolutely ludicrous prices!
I designed these to sit as close to the wall as possible while being far enough out that the cable does not kink when fed through the bottom. Some cable trunking would really make these look great! We intend on getting a slim unit flush to the wall at some point which is why I haven't gotten any trunking on in the photos.
I've printed these in PLA with 20% infill, and there is no flex, and at about 3 weeks so far, no sagging at all either.
I have used green because it was just what I had on hand, but in black these would be near invisible, they surround just the base rubber of the speaker, and the mounting point itself is thinner - and lower - than the speaker itself; head on, you can't even see it.
The screws I used for this were M3, they fit just snug in the holes but may need drilling out if your printer doesn't handle vertically printed holes all that perfectly.
(you could use supports but I don't think it's worth it)