AC Infinity Ionbeam S16 Hanging Rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rig to convert your AC Infinity Ionbeam S16 support lights into a hangable grow light.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 97
- Makes
- 0
- Views
- 519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A rig to convert your AC Infinity Ionbeam S16 support lights into a hangable grow light. Includes a clip to mount the controller on top of it.
Printing instructions
You can print this with PETG with all-default settings.
A 0.6mm nozzle is recommended for faster printing, but 0.4mm will work as well. Use 0.2mm layer height. No supports.
Note: The beams are too large to fit a Prusa Mini. You need an i3 (or another printer with similar print bed dimensions) to print these. And even with an i3, you will have to rotate the model by 45° for it to fit the print bed - see slicer screenshot.