LayersFactory
Report model
1 / 7
18v Einhell tool to Bosch battery adapter — image 1
1 / 7

18v Einhell tool to Bosch battery adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

RedShark

@RedShark_2136751

The adapter makes it possible to use an 18v Bosch battery on an Einhell 18v tool.

Rating
0 / 5
Likes
18
Downloads
103
Makes
0
Views
1,502
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Electronics
License
Creative Commons — Attribution — Noncommercial
DetailsFiles (3)Makes & comments (Makes: 0) (Comments: 1)Remixes (0)Collections (26)Related

The adapter makes it possible to use an 18v Bosch battery on an Einhell 18v tool. To do this, I connect the positive pole and the negative pole of the Einhell tool to the Bosch battery. I have also connected the pole for the temperature sensor of the tool to that of the battery and have not experienced any problems so far.

To protect the components, I have installed an XH-M609, which protects the battery from deep discharge. I have also installed a 25A car fuse. The batteries can actually withstand even higher voltages, but I thought 25A should be enough. But both parts are optional, you can also leave them out and wire the pins direcctly.

There are 4 M3 brass threaded inserts in the case so that you can screw the lid tight. As usual with Einhell batteries, there is also a safety button which you have to press to remove the adapter. To secure the button against slipping, I have attached an M2 brass threaded insert and used a short M2 screw. I used an 8mm x 25mm so that the safety button works like an Einhell battery. You can see this in more detail on the cross-sectional image.

Use the adapter at your own risk.

Here is a list of the parts I used:

Tags

batteryboschadapter18veinhellbosch18veinhell18v