1 / 2
Ikea Latt Table and Chair Ball Foot — image 1
1 / 2

Ikea Latt Table and Chair Ball Foot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple ball foot for the Ikea Latt children's table and chairs.

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
139
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

We needed to protect some new flooring from potential damage from our grandson's play table and chairs (Ikea Latt). I quickly put this ball foot design together in Tinkercad.

They are printed in TPU and I used the following settings :-

Orientation - as in the STL file

Infill - I used Cubic Subdivision and 40% to give the part sufficient strength.

Adhesion - Brim to make sure the part stayed on the bed during print. This can be easily trimmed off with cutters.

Layer height - 0.2mm

Wall line count - 2

It is designed to be a snug fit and holds onto the leg via friction.

 

Tags