1,673 models
I originally designed this as a mini ornament. It looks great at that size (1X), but looks even better at 1.5X and should look good at even larger sizes. At 1X, it's about the size of a golf ball. At 1.5X, it's a standard Christmas ball…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the FullControl GCode Designer, I wanted to experiment with designing models for slicing to achieve super precise and strong parts. The lattice drastically improves vase mode layer adhesion and part strength by sandwiching…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Platte selbst erstellt
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Choose between 9 unique splatters! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
2 Versions!
Print approx. €10.52–€12.86 excl. taxPreliminary estimate for one variant
This will print best using supports, but it doesn't need a lot. I recommend these settings: Perimeters: 2 Infill: 15% Rectilinear (first 13mm) 15% Lightning (everywhere else) Supports: 35 degree overhang using Organic supports For extra…
Print approx. €6.28–€7.68 excl. taxPreliminary estimate for one variant
Kabel: Aliexpress / Amazon Buchsen: Aliexpress / Amazon Version mit nur einem Anschluss Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen Anschlussplan für die Volksfräse VF1 und dem Tillboard.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
A plate for weighing down Lysel slatted curtains. Measurements: 89mm x 50mm
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
The two piece egg clicks together and pulls apart. Since it's a friction fit, the tightness will vary greatly depending on your filament, printer, and settings. To separate the two pieces, twist and pull. If the fit is very tight, twist…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for one variant
Mehrfarbiger Druck mit Prusa MK3S+MMU2S, mit PLA in Gold u. Schwarz. Druckeinstellungen siehe Fotos. Gedruckte Teile zusammen stecken, fertig. Bei mir sitzen sie sehr stramm so das kein Klebstoff benötigt wurde. STEP-Dateien für Eigene…
Print approx. €6.86–€8.39 excl. taxPreliminary estimate for one variant
Hier ist eine Ubiquiti Unifi G4 Halteplatte damit sich die Klingel besser an der Hauswand befestigen lässt. Bei uns war das Problem das sich hinter der Klingel noch andere löcher befanden die ein bisschen versteckt werden mussten.…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for PETGSource material: PET
I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be publishing a new ornament every day! Follow me to stay up to date. If you want to print…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Für meine FJR1300A brauchte ich eine RAM Halterung die auf der Lenkkopfmutter montiert werden sollte. Im letzten Bild sieht man meine bisherige, alte Montage mit einer 4-eckigen Fußplatte die ich aus einer alten RAM-Halterung gemacht…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for one variant
Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
Wer öfter mal Festplatten aus Wartungsgründen transportieren muss, der kann die Box für den sicheren Transport verwenden.
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
This will print best using supports, but it doesn't need a lot. I recommend these settings: Perimeters: 2 Infill: 15% Rectilinear (first 13mm) 15% Lightning (everywhere else) Supports: 40 degree overhang using Organic supports For extra…
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for one variant
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
E8 Lie group or E8 lattice (go with E8 Thick) E8 root system projected onto its first three basis vectors. Below is some code I generated in Gemini. A simple game to learn the basics of E8. (some of the edu diags are sketch) Below is a…
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for one variant
Step Datei anbei um die Datei abzuändern.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Führung für obere Glasplatte des Sovol SV08 Enclousers. Mit diesen Keilen kann die obere Glasplatte des Enclousers, wie eine Schublade vor und zurück bewegt werden. Mich hat das Einkeilen der Türen immer ziemlich genervt. Guide for the…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Printed on a Creality Ender 3 Neo with 100% infill, without supports and standard PLA.
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant
Die perfekte Unterlage für den Tisch. Skaliert ist es für den Prusa XL, kann aber beliebig skaliert werden. Die Datei “Inside” soll die Fasern des Blattes abbliden. Dazu sollte am besten der modifizierer vom Slicer verwendet werden. Falls…
Print approx. €8.05–€9.84 excl. taxPreliminary estimate for one variant
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
Four sided Owl Lattern Tealight for Halloween! Prints faster with 0.6 nozzle, and even better with MK4 with new firmware (RC). Needs support for mouth and lower top edge. Larger is probably better.
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Fugenbreite = 2mm Tellerdicke = 2mm Tellerdurchmesser = Ø70mm
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Gedruckt in PLA mit MK4
Print approx. €7.60–€9.29 excl. taxPreliminary estimate for one variant
Feel free to Print them in different colors, like in the game If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Gescannt und CAD bearbeitet. In verschiedenen Größen als Untersetzer, Wandschutz usw. verwendbar
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it. You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer. The…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET
The mounting plate allows the excellent charger holder for the JOYCUBE Fischer e-bike charger from Wolf Flow/db1337 to be attached to a grid with M3 screws and nuts. Print the mounting plate in STL orientation in 0.2-0.3mm layer height…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Kleine Anschlussbox für GX16 Stecker an der Z-Achse
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Die Wände sind mit 1mm dünn, die Bohrlöcher sind für die auf dem Foto dargestellten Spax entwickelt. Nicht zu fest randonnern, bei mir ist die Rückwand ein wenig gesplittert. PLA-NX1 von Extruder wurde hier benutzt. Hab den vorbereitete…
Print approx. €5.84–€7.13 excl. taxPreliminary estimate for one variant
Vollflächige Gridfinity-Base für Eurobox 600×400. Passgenauer Randabstand. Einlegen, fertig. Format: Eurobox 600×400 , auf typische Innenmaße (~ 555×355 mm ) ausgelegt. Raster: 13×8 Zellen → 546×336 mm Nutzfläche. Use-Case: Für Nutzer mit…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Mein IKEA-Jokkmokk Esstisch wird häufiger als Arbeitstisch für alles mögliche denn als Esstisch benutzt. Das Dumme ist, dass bei diesen Arbeiten häufiger mal Kratzer oder andere Spuren auf dem Tisch bleiben, die man eigentlich auf einem…
Print approx. €14.33–€17.52 excl. taxPreliminary estimate for PETGSource material: PET
Mit der Zeit werden es immer mehr Druckplatten, da verschiedene Materialien ganz eigene Ansprüche an die Druckplatte stellen. Eine gepflegte Druckplatte ist Voraussetzung für den Druckerfolg und sollte daher bei nicht Gebrauch sorgfältig…
Print approx. €5.51–€6.74 excl. taxPreliminary estimate for PETGSource material: PET
Leider habe ich noch keinen Smart-Home Gurtwickler für Rollläden gefunden, der Matter-kompatibel ist. Meine Lösung daher: SwitchBot Bots mittels einer Montageplatte am Gurtwickler montieren.
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Da für diese Heißluftlötstation keine richtigen Füße mitgeliefert wurden und das Ding etwas wackelig steht, und, weil die Düsenvorsätze lose dabeiliegen, habe ich diese Basis konstruiert. Die Seitlichen Laschen krallen sich an den…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for PETGSource material: PET
Externer Festplattenständer für Toshiba DTB410 und Seagate 2HJAPA-500.
Print approx. €4.05–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
Als Geburtstagsgeschenk für einen Freund gedruckt 15% Infill
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Schutzhülle für Fein Multimaster Sägeblatt 184 B=9,9mm, 183 B=20mm, 160 B=33,4mm, 152 B=43,4mm, 161 B=66,6mm, Dm. 80, Raspel 79,7mm, Spachtel 226 :B=56,3mm Alle Modelle mit 3 Wandstärken gedruckt 152, 161, 226 stehend und mit Rand 5mm…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht. Das einfache Schutzgehäuse…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Atomic Skibindungsplatte 10mm Atomic ski binding plate 10mm - if you a a shorter leg, you need a plate
Print approx. €7.09–€8.66 excl. taxPreliminary estimate for one variant
Ich nutze die Modelle als Halterung für den Stecker „ Kalitec KALI-2408 ”, um das Netzteil meines „Prusa MK3.5” außerhalb des Druckergehäuses ( PrintClosure-Projekt ) zu montieren, sowie für den Stecker „ Kalitec KALI-2406 ”, um…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Ich musste durch meinen Kaltkeller ein Kabellehrrohr entlang der Decke legen. Diese ist allerdings mit mehreren Zentimetern Styropor gedämmt. Dies ist eine einfache Platte, um den Druck der Klemme besser auf das umgebende Styropor zu…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Das Model kann an die jeweilige Tischplatte durch skalieren angepasst werden. Der .gcode ist hier an eine 350mm dicke Platte angepasst. Gedruckt: mit Support nur 2-3 Wänden für optimale Federung PETG
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Ersetzt den Halter aus Styropor. Dieser geht leicht verloren oder kaputt. Daher habe ich dieses Teil entworfen.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Halterung für Parkside Magnetplatte
Print approx. €2.79–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
Passen Sie die Stativhalterplatte flexibel an Ihre Anforderungen an. Dank der abnehmbaren Arme können verschiedenste Stative mit einem gängigen 1/4-Zoll-Anschluss verwendet werden. Die passenden Halter wurden speziell für den Artec Spider…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
@Anna, C97121-A2025-C26.stp, Adapterplatte Groß
Print approx. €5.97–€7.30 excl. taxPreliminary estimate for PETGSource material: PET
3d scan with improved pegs and installation stress release. Perfect fit for Nespresso Delonhi Lattissima Pro Latte. Print at 0,15mm layer hight - 4 perimeters - Supports as already in 3mf minimum PETG due to heat, other materials like PC…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
A cool display piece to demonstrate the ability to create and 3D print unique objects. Set at high temperature to allow for stringing. Shows how stringing can be used to enhance prints unique appearance. Did NOT use any supports. Did NOT…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
Schnell gedruckt... Schon ist der Festplattencrash schön in Szene gesetzt! Es werden noch vier (WD) Scheiben einer Festplatte benötigt...
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Edit: added an STL model/3mf file for printing an airless basketball out of Yasin PEBA filament on 5/2/2025. These models/files are for making airless basketballs out of either the PEBA filament or the Ataraxia Art Flexible PLA (FPLA)…
Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…
The Design Here's a set of 4 stylish Baubles. They have a diameter of approximately 60mm Let me know if you experience any issues and i can try to help Printing Please make sure the print bed is clean as adhesion is very important.…
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
Can your printer handle this? Based on the Makers Muse Lattice Cubes, this design is a similar thing in the sense that it is a lattice cube on a base. The super lattice cube is two lattice cubes rotated in on each other, and it makes…
Needed to hold up my plant as it was growing. Modeled this to be modular, can get bigger, wider, whatever. No supports are needed. Print the spikes vertically, unless you have a super sticky print surface, print them with wide brim.…
A splattered Wile-E Coyote
This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…
'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Utility case low boy lattice edition. Internal dimensions…
The Bolz is a set of three 3D-printed double-lattice TPU squish balls designed to feel different in the hand while keeping the same playful lattice-ball concept. Each ball is not just a hollow outer shell. Every design has an outer…
vinyl wall mount.
This is a simple shield to prevent dust, debris, coffee splatter, etc. from entering the Gaggia Classic / Pro / Evo water tank. As a result, the water stays fresher for longer and biofilm takes longer to build up. There are 3 variants.…
Gridfinity “Latte Box” (Milk Crane) - Desk Organizer - Stackable - Custom Inserts Yes, another gridfinity system. But this time it's cute, nice to print , and a perfect desktop decor . 5 new “latte boxes” to better organize your desk.…
I liked this model a lot, but the first print I noticed the scraper edge wasn't as clean and sharp as id like. I found it to be the bottom edge of the model was slightly beveled and as such, the first layer of the scraper was printing…
Ein einfacher Schallplattenständer, passt für Standard 12" LPs (mit und ohne Sleeves) Größen: 2 Fach: 335mm x 180mm x 338mm (TxBxH) 3 Fach: 335mm x 238mm x 338mm Material: PLA oder PETG Infill: 10% Kein Support - auf die Seite mit den…
These models/files are for making airless basketballs out of either the Wisdream FlexiTough or DudV2 PLA-B filament. I could not add all of the STLs/files to this page because the file sizes are too large. If you would like the…
Aquarium Cave Collection is a range of stunning aquatic hideaways designed to enhance your underwater world. With three distinct models to choose from, you can transform your aquarium into an enchanting aquatic paradise. Low Poly Cave:…
Lightweight, stylish, and perfect as decor or a unique Easter piece.
Here's a fun, quick, simple print to brighten up the holidays. The design is clearly a bell, but it also references Renaissance architecture.
Cylindrical container with a screw-top lid. No supports needed. Scale up/down as needed
Surely you noticed the hole in the center of the round garden table ? It's there for a reason! Meet two additions that will expand the capabilities of the table! Protect a covered table from rain or sun? Easy as pie! With an amazing…
This is Wallfinity, the universal Gridfinity wall mounting solution. The purpose of this project is to provide a universal, adjustable, and mostly reusable system for mounting Gridfinity onto walls. Most systems have a few fixed solutions…
Compact case for LattePanda 3 DELTA Before inserting the LattePanda 3 into the case: break out the support-plates out of the plug slots Cover can be fixed with 4 x M3x10 screws LattePanda Board can be fixed with the 4 original screws (4 x…
Working on my CAD skills, I recreated Pred's awesome storage box. I wanted a flat lid though, so I made that change. Full source is available on OnShape you can change the dimensions using the parameters to suit your use case. I highly…
This a remix of Machvolum's model which comes from visle's original model. This version add's rounded corners to Machvolum's model. The theory is that on sharp angles (such as 90 degree corners or similar) the extruded filament tends to…
Holder for three Steelsheets , Mountpoints down on the long side off the Enclosure (left, middle, right). Druckplattenhalter für drei Druckplatten, anbau position unten(lange seite)links,rechts und mitte.
Update 06-01-19 It turns out that the 3x3x3 model wasn't quite levelled correctly, thanks to hojokono for pointing it out. I have now re-uploaded the model so that it lands squarely on the bed in your slicer. Update 16-1--16 Added a…
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
This is a modified version of "8D Cubic Lattice (3D Shadow) by Chriskpalmer. Timelapse Video: https://youtu.be/SaP5Pu5R6j8?t=2m37s I added a base around the bottom so that it prints without issue and is a bit sturdier. I printed mine with…
A futuristic ball holder inspired by wormhole geometry and radial symmetry. This sculptural stand grips sports balls (basketball, soccer, baseball, golf, volleyball) with elegance and stability, making it ideal for display or storage. The…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
I upload one color benchy for resin printer recomended no supports
Playing small board games with foldable leaves can be frustrating when the board doesn't sit flat. This clip aims to solve that by allowing a board to sit flat and be played whilst taking up little space itself. This clip is designed to…
This lattice is auxetic, meaning it has a negative Poisson's ratio. Unlike most materials, where compression in one direction makes them expand in the other, this lattice wants to compress or expand in both directions at once. The design…
For everyone who wants some latte art on their coffee, but just can't do it or - like me - doesn't know how to do it properly yet. Works best with cinnamon or cocoa powder - it can even make your coffee taste better. The closer the…
Das Sensorkabel habe ich durch ein längeres ersetzt. Eventuell sind Verlängerungen notwendig bei der Nutzung des originalen Kabels.
Das ist eine Spurplatte die für BMW Modelle mit einem 5x120 Lochkreis und 72,6mm Mittelloch Zentrierung. Zentrierung ist mit Spiel auf 73mm geplant. Alle Spurplatten haben ein 3mm Konus, wegen dem Konus an der Radnabe. Zusätzlich: 1+2+3…
This planter is designed with the intention of creating a visually attractive design that is also easy to print. The pictured print was done using a 0.6mm nozzle and 0.2mm layer height to save printing time, but it could easily be done…
The two piece egg clicks together and pulls apart. Since it's a friction fit, the tightness will vary greatly depending on your filament, printer, and settings. To separate the two pieces, twist and pull. If the fit is very tight, twist…
This model was originally created and posted by JamesThePrinter. Thank you for making this. I personally was having one issue though. The tail section kept coming loose from the build plate. I noticed that it was essentially printing a…
Flat Connector 100x40mm , 5mm Thick, Holes 6mm to connect two items together. Lochverbinder 100x40mm, 5mm Dicke, Löcher 6mm zwei Gegenstände miteinander verbinden. https://makerworld.com/en/models/177930#profileId-195785
Platz für die wichtigsten Werkzeuge: PH0 Kreuzschraubendreher, 0,9 - 1,3 und 1,5 er Inbusschlüssel. und dann noch Platz für die Schrauben. Bei der orangenen Platte waren die Löcher noch etwas zu klein, bei der weißen wurde es…
The Church of Jesus Christ LDS Temples. Remixed.
