Counting matching models…
MK15.1 is the latest and suggested version to use, the other versions may not work as expected but have been left here for users that already have the previous versions and want to print it again. Hexagon Pattern can be printed with two…
"Relatively" simple mod for the Ender 3 V3 SE Before you continue please read over the BOM and make sure you have everything, especially the printed parts! And remember I am not liable to any damage to your printer, you are doing this at…
I have made this simple screen cover for the Ender 3 V3 SE, I printed it using 0.2mm layer height and 20% infill, however the infill shouldnt matter too much. I used 4 bottom and top layers. Id suggest using a darker colour filament to…
A detached screen mount for the Ender 3 V3 SE, allows for a more flexible installation along with some mods I'm making for the original screen mounting system. Printed at 0.2mm layer height and 15% infill
I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock configuration please check out my single fan shroud here;…
Light-bar attachment for the Ender 3 V3 SE that clips onto the X-axis gantry. Warning! The max Z Height will be reduced when this is on, the print head cable drags on the clips at the top. 240mm height is probably ok but do your own…
Quick set of spool spacers I made for creality printers Please measure what you need and round down to what size spacer to print Printed with PLA, infill and walls don't really matter
The new slim K1 shroud now supports my improved fan ducts (finally managed to learn how to do that). Print the ducts in PETG, ABS or ASA. The shroud can be printed in what you want, maybe not flexible filaments :) -BOM: 10x M3*8 Screws 8x…
Please print the duct in at least PETG, if you can print ASA/ABS then feel free to do so. This is an updated design of my original shroud as requested my many members on our discord, the link is here if your interested;…
You will need to add springs to the bed to allow it to go lower so that the brass nozzle wipe will fit, you then put it on the underside of the metal carriage with a nut. Ive added a klipper macro at the bottom to help out, Marlin has a…
You will need to buy a Samsung T7 (obviously :P), USB C Male to Male adapter and a 180 degree USB C connector. I have the ones I bought below. -USB C Male to Male-…
Quick CYD screen I made to mount to a Voron V0.2 (might work on earlier versions but I only have the V0.2) Uses CYD-Klipper on the ESP32 to get a cheap screen for the V0 as I hated the old school one that it came with -…
NEW VERSION - https://www.printables.com/model/818919-slim-ender-3-v3-se-dual-4010-shroud-k1-edition I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock…
Charging dock for the Anker 737 (Powercore 24k) You will need a 90 degree USB C connector I bought this one; https://amzn.eu/d/ayISXNv I then just VHB taped it to my desk to provide support for the 90 degree connector
Print face down with normal supports, I used PETG but ABS/ASA would be better for hotter climates. Should work with any iPhone model as I have tested with a 15 Pro Max, camera bump isnt an issue either with the charging pad being raised.…
Zhiyun M40 FIVERAY holder I made to store the light on the wall, I used 3M tape to attach though could easily be remixed to have screw holes. I printed with 0.2 layer height and 15% infill, however this shouldn't matter much due to the…
I printed in PLA with 3 walls and 20% infill BOM: 1x M3X18 Screw 1x M3 Nut 1x Elastic Band or 2x Wood screws …yes its that short this time Simply take off the monitor stand on the C270 and use a M3x18 screw and M3 nut to attach it to the…
These are all currently available results.
