1 / 2
Slim Ender 3 V3 SE Dual 4010 Shroud K1 Edition — image 1
1 / 2

Slim Ender 3 V3 SE Dual 4010 Shroud K1 Edition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified version of my standard Dual 4010 Shroud K1 Edition

Rating
3.667 / 5
Likes
57
Downloads
225
Makes
2
Views
2,230
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution

The new slim K1 shroud now supports my improved fan ducts (finally managed to learn how to do that).

 

Print the ducts in PETG, ABS or ASA. The shroud can be printed in what you want, maybe not flexible filaments :)

 

-BOM:

  • 10x M3*8 Screws
  • 8x M3*16 Screws
  • 10x M3 nut's
  • 8x Flat washers
  • 8x Lock washers (honestly optional, I don't know how much they affect the build but i've been using them)
  • 1x CR Touch cable 10cm
  • 1x Molex Picoblade cable
  • 2x 4010 Blower Fan

You will also need some way of soldering the fan cables together so a solder station or some solder seal wire connectors will be needed. Please make sure to buy Molex PicoBlade cables as the Micro JST cables do not work they look basically the same but have a different pitch, I found this out the hard way :). 

 

-BOM with links if you are in the UK:

 

Uses the same instructions as https://www.printables.com/model/619049-ender-3-v3-se-dual-4010-shroud however when you print it, align the model face down like this without support; Then the new ducts get printed on the face where the outlet is, like this (you may need supports and a brim for this print);

Auto align should do this for you in Orca slicer but I haven't tested on others

 

YOU WILL NEED AN EXTENDED CR TOUCH CABLE! 10CM IS FINE

Tags