Counting matching models…
Ever since I learned about kit cards I wanted to make one of my own. I tried to fuse my love of traditional Japanese woodwork and joinery with the art of 3D printing and create a relatively flat kit that allows you to build and snap…
Pretty self explanatory. I was getting tired of carrying around a small box full of drill & driver bits, so I decided to make an accessory that clips easily onto my DeWalt DCD999 drill/driver. Presumably it will clip onto some of DeWalt's…
Many wall mounted brackets and holders already exist for DeWalt's iconic 20 volt batteries but after having looked at many designs I found them all lacking in various ways so I decided to make my own. Its main virtue is that it uses under…
Straight out of the 20th century, Neotoy Lab presents a fully functional recreation of a mechanical door locking mechanism from a more elegant age. This kit includes all the primary parts with which to assemble your own door hardware.…
This design was inspired by something I saw on Pinterest awhile back, which was a “butterfly hinge” that looked vaguely similar to this. I wanted to make my own version in my own style, and also test out ‘Print-in-Place’ as a technique…
This design is based on many paper templates I've created with pencil and paper over the years on construction sites and in my workshop. This new version is the culmination of all my experience in creating sturdy and aesthetic joints…
This is the updated version of a model I made many years ago, I've gone in and fixed all the problems the original had. It's also been improved to print without supports. You put your nectar in a standard mason jar, set the feeder on top…
I made this model back in 2011 for Second Life, it was kind of meant to just be a prop that people could add to their land or house or whatever, it adds a lot of atmosphere. I think it might be good for things like tabletop games and…
A slightly improved version of the classic STAYHOLD nylon buckle. Fits 27mm max width straps. No-sew design allows strap loops to be threaded onto the buckle. Prints without supports. Some light assembly required! Updated 2026-09-20 Added…
You can easily mount an unmount heavy terracotta flower pots to most vertical surfaces with just a couple of 2" screws. This is for pots with a 60mm rim width. If you're confused, please watch the video. Prints without supports.
Updated: 2026-02-23-1400 DeWalt Impact Bit Clip Flex Used an improved bit holding mechanism from another project that upgrades and streamlines the design in several ways. The only somewhat downside is that there are now 5 instead of 7…
How to make a linear spring with 3D printing that neither wears out over time or fails due to material limitations. I tried to overcome those challenges with this design, and it also just happens to be a somewhat useful device. Probably…
Haha! Looking through all my old 3D models throughout the years and came across this gem. The venerable Pyro GX from the 1990s PC game Descent II. The geometry is pulled from the official polymodel extracted from the game's .HOG files!…
Nothing special. Normal thimbles never fit me because I have big hands, so I made this primitive thimble for myself, maybe it will help you too with your sewing & embroidery projects. Inner diameter is 20mm. 2024-01-10-13-06-Thimble file…
This fitting allows you to quickly and easily connect two pieces of 710 gauge (basically 5/8ths) poly irrigation tubing. As some of you will know, 3D printing doesn't essentially guarantee a water or air-tight surface due to the pores…
This handy little symmetric two-piece part will snap securely around the wire loop that most five-gallon and some smaller plastic buckets have. It replaces the cheap and easily broken plastic tube that most buckets have to save your…
I needed a small (portable) and cheap chamfer plane for a wood working project so I designed this to work with disposable, readily available utility knife razor blades. After playing around with it for a bit I further modified the design…
There are many different ways to cap the end of a drip tape irrigation line and I know them all. Although after five years of working on a small farm this one was my favorite. Sadly the company that manufactured these stopped making them…
I created this a long time ago for Second Life, now I modified the model a little for 3D printing. You could print this out of TPU as one solid piece and have a perfect wheel / tire for RC cars.
After two months of development It's finally here, the project so many of you were waiting for. This elegant joint system is designed to bring full mobility to a variety of applications utilizing standard ¾ inch PVC to create ‘posable’…
This is for the Ropes, Cordage & Straps Gear flash contest. This design is a snap-together, fully operational, gravity operated, miniature mechanical capstan. It makes it possible to cinch (through ratcheting action) cords extremely…
This handy little stem clip makes it possible to rapidly and reversibly trellis climbing plants on any surface regardless of orientation. A small standard tack nail fits in the center hole, once this is pushed into your target surface,…
2026-10-15 Released "Improved" version after a year of intensive testing. Easier to insert, reliable grip, better seal, stronger barbs. Pretty much comparable with injection molded designs, but cheaper to produce. 2024-04-23 Made a few…
It's one thing to play around with these in a 2D program, but it's way more educational to print a few out and place them together with your hands (they are only 4 CM across). Even though I made this model, I can't take any credit for the…
Inspired by my Swanson speed square, I wanted something a little faster and more portable. The internal back-facing floating print-in-place hinge allows you to level the square on either side in seconds. The rails on each edge make it…
Allows you to turn a standard metric M6 bolt into an ergonomic knob with a simple snap-fit cap. The cap cavity includes a simple yet dynamic series of snapping deformable blades that conform to the small yet significant variations in bolt…
2025-11-28 Update: Added an alternative version brought to my attention by @Fishy_3930160 Outer dimensions are 8 x 8 inches. The original was blocking the entrance to an attic vent in my 1800s era house. The design itself is probably from…
I melted the original (don't ask), this is just a straight up caliper-measured copy (almost exact) of the original two-piece handle that is used on the lid and the side of many of the basic Weber BBQ grills. So if you melted yours off…
When I first got my P1P I tried to make a Print-in-place chain just to teach myself the technique, but it was too difficult at the time. Now two years later I stumbled across @ThorinOakenshield 's chain model in the recent uploads. It was…
Beveled edges provide for a nice fully exposed surface that is difficult for roving miscreants to remove and deflects water/wind. Internal standoffs support the panel at its optimal height. Side notch allows for easy wiring. Watch the…
Inspired by a device made by Reddit user Few_Significance_829 this handy little attachment for your DeWalt DCS577 Flexvolt Circular Saw re-directs the dust expelled from the exhaust port on the blade guard to the front instead of the back…
2026-10-01 Update: reworked the base design a bit to strengthen the core structure, this should theoretically reduce warping and allow the various faces of the palettes to align more precisely and reliably. I also added 3mf files with my…
It looks cool and works good. Nothing too fancy. 105 x 50 x 4 mm. The clip is a slightly modified version of the one I designed for my utility buckle.
A battery caddy for the DeWalt 20V & Flexvolt battery platform. Easily carry up to 30 pounds of batteries onto the jobsite. Load and unload with ease. Optional accessory trays lets you include up to 54 full size 1/4" driver bits & other…
The 1000 watt professional Ninja brand blender single serve cups normally have a blender module that closes them off on top. This is not ideal for my on-the-go lifestyle so I designed this replacement cap that does not have blades…
Designed for cafes and other establishments where table & order tracking is required. This handy little kit allows you to print out only the numbers you need and create sets on demand. The unique slotted design makes it possible to…
This is a simplified DIY version of the classic Hironbec Pendulum, a device that is designed to gatekeep birdhouses based on the weight of birds attempting to enter. This allows you to protect some vulnerable species, e.g. Tree Swallows…
There are two parts. The rack modules which can interlock with each other forming the number of slots you desire. The cap module which can be placed at the end or in the middle of the rack segments. It's pretty easy to figure it out. The…
2026-10-04 added a 10 layer wall thick 3mf of the ratchet key for stand-alone printing. I had several of the weaker keys fail, so this one is a little more reliable. 2026-06-21 added improved version: Locking key now stays in place…
This is for the contest. Since I'm relatively new to 3D printing, I'm experimenting with pushing the limits of structure and mechanical elements, so I challenged myself to design an entirely new take on the conventional paper towel roll…
My friend wanted to laser engrave standard popsicle sticks with labels for a plant sale. So I designed this module for him that lets you easily drop in the sticks and then keeps them in precise alignment during etching. Additionally you…
This took me 4 days to perfect, ugh. Fits casters with mounting base 42.5 x 52 x 2.5 mm (four mounting holes)… these are pretty universal at least in North America. Prints without supports or brim. The other end slips over a square leg…
Custom designed for the medium of FDM with ultra-precise tolerances and all parts 3D printable. The ball bearings are comprised of three parts with a zero-tolerance press fit. The housing fits 12 of these ball bearings. I recommend…
It's nothing fancy, this is a very practical build. I tried to give it a slight art-deco style. One thing I will say is that the topology is very sophisticated, all surfaces are angled to maximize draining. The grid that the soap or…
Another project for my mom. All edges are rounded for reasons.
I made this thing ages ago just for fun and rediscovered it in my "junk" models folder recently. So I cleaned it up a bit and added a few new bells and whistles. It measures approximately L 77 mm x W 59 mm x H 55 mm. The countersunk screw…
Fits extruded aluminum ladder stock profiles that are "H" shaped, measuring approximately 76.5mm x 21mm. Clips into place.
Long ago I had the idea of using neodymium super magnets as fasteners or snaps to secure things like clothes, buckles and straps. My dream was to make it easier and more convenient to ‘button up’ and ‘unbutton’ things in a rapid and…
This is minimal sized model to demonstrate the technique, the beam is only 1x1 cm. It is part of another larger project, but it stands alone as a useful and enlightening artifact that can be used in various ways. Furthermore I spent a lot…
I ran out of those cheap molded plastic hangers so I decided to design one I could quickly print out whenever I needed an extra. Of course my print bed is very small, so I had to design it in parts. I was initially going to make them…
I was inspired to make this as I thought about how light radiates throughout a room in a way very similar to the rings in a disturbed pool of water. On the wall it creates a peaceful yet interesting accent. Really something as powerful as…
You can slide it into the bracket or snap it in with a gentle push. Only holds the hub model pictured, as far as I know.
The model consists of two parts: a base and holder modules. The base is flexible and includes two mounting holes. The modules are designed for standard 3mm, 2mm and below bits to seat securely via a compliant spring mechanism. Print out…
A useful little box that stores the secrets of the universe.
There are a bunch of homeless people who hang out around a local bus stop, there's a bench and a couple of street signs right in front of it. They always throw their coats and bags on the ground, which got me thinking... What if those…
2025-11-17 Update: Noticed after printing with low-quality filament that the tabs were breaking off. After further analysis identified several systemic flaws in the original model which was from March of 2025. Using new knowledge gained…
For a guy on reddit. I did some fine tuning to reduce damage to the seatbelt as well.
2026-10-09 update: added version with additional cutout for SIM card slot, and wider headphone jack access. Print with Zero Percent Infill for maximum shock protection. 0.1 mm Layer height for best fidelity. I've had two of these phones…
Went to two hardware stores and couldn't find exactly what I wanted so made my own. They come in two parts with little joinery pieces to secure them together into one piece (friction fit, or glue if you're paranoid). There are 8 mounting…
Highly doubt anyone else will need or want such an obscure part, but I had fun designing it so I thought I'd post it. It's designed to work in two orientations so it can be used with horizontal or vertical frame placement. The sketchup…
I recently used my classic bracket in another project, as part of that I significantly reworked and improved upon the original design. This model is the culmination of those changes. It does require slightly more filament to print, but is…
These are all currently available results.
