Counting matching models…
Remix of flioink's amazing samurai-inspired mask #3 (my personal favorite of them all). Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces…
Remix of flioink's amazing samurai-inspired mask #2. Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces together. Option 2 : Print the “Assembly -…
Remix of flioink's amazing samurai-inspired mask #1. Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces together. Option 2 : Print the “Assembly -…
With the surge of more advanced and affordable 3D printers, any cheap, average machine can now poop a decent 3D Benchy . That defeats the very purpose of the benchmark, and calls for a new one that can stress the printers again. Also, 3D…
Your favorite test cube and your favorite cubic foldable robot in a print-in-place, beautiful package! I can’t tell if you’ll be more frightened of the QB-01 robot, or if it will be more frightened of you. However, you can find out by…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
This is a great example for my Self Watering Conversion Kit (Ø 10 cm & Ø 12 cm) . Turn anything into a Self-Watering Pot! This Bulbasaur uses the Ø 10 cm pot from my Self Watering System . Includes : Self-Watering Bulbasaur Base You'll…
Third design on the thematic diorama series for each Warhammer Underworlds band. And it is now time for the Sepulchral Guard. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08…
Wargaming oval bases designed for 4x2mm magnets! Height : 4 mm (all) Size : 70 x 25 mm 60 x 35 mm 75 x 42 mm 90 x 52mm 105 x 70 mm 120 x 92 mm 170 x 105 mm This is part of my Wargaming Bases collection: Round Bases :…
Set of Hex Screwdrivers with a rotary end cap, magnetized tip, and multiple options: Sizes (Length without Hex bits): S = 5.7 cm M = 7.9 cm L = 9.9 cm Options (2 Options per size): 12 mm Hex hole 24 mm Hex hole All handles come with a…
Wargaming round bases designed for 4x2mm magnets! Height : 4 mm (all) 2,5 mm (round 25mm low.stl) Size : 25 mm 28,5 mm 32 mm 40 mm 50 mm 60 mm 75 mm 80 mm 100 mm 130 mm 160 mm This is part of my Wargaming Bases collection: Round Bases :…
Fourth design on the thematic diorama series for each Warhammer Underworlds: Ylthari's Guardians. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height 2-3…
Simple yet practical wall stand for the PS5 VR2 Headset. If needed, you can print a second one for rolling the cable. You'll need : 2x M4 Screws. Length depends on your use case. Printing : Print it laying on one of its sides. I recommend…
This is the first of many more to come! I'd like to design a thematic diorama for each Warhammer Underworlds band. You can now display your grumpy fatty avenging dwarves plus get some obstacle hex terrain at the same time! Includes :…
Here we come again! Second design on the thematic diorama series for each Warhammer Underworlds band. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height…
Aaaaanother one! Here's the diorama for The Farstriders. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height 2-3 Walls Infill at 10-12%, Gyroid *You can…
Fresh from the oven: the new diorama for Steelheart's Champions. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height 2-3 Walls Infill at 10-12%, Gyroid *You…
Fifth design on the thematic diorama series for each Warhammer Underworlds band. It is now time for the walking dead. I mean, The Grymwatch! Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing :…
Simple but elegant self watering system that allows the pots to be removed from the base at any given moment, and facilitates extracting the plant from the pot. It also comes with water level indicators. This system is compatible with my…
I was looking for a poop box for the A1 mini but couldn't find any design with magnets so I designed my own. Also, it serves as a stop (or a good reference point) if you're putting the printer against a side wall. The receiver has a…
New design on the thematic diorama series for each Warhammer Underworlds band. Please welcome Zarbag's Gitz! Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer…
I took jzisa's V29 as a reference for the inner chamber. I designed a new shell from scratch aiming for a compact, elegant result. I also added a hole perpendicular to the print layers for increased strength. It accepts a keyring or a…
Dremel Router that works with the 3000 and 4000 series. It has a good grip for precision, a flat side to use with straight guides and a radial attachment for circumferences. 2 Versions for the radial attachment: Low and Raised, in case…
Spatula for working soft materials. It's also ideal for applying snow and mud texture effects on wargaming bases and dioramas. No supports needed. I recommend printing with 0.12 layer height to get smoother tips. NEW: You can test your…
This is a great example for my Self Watering Conversion Kit (Ø 10 cm & Ø 12 cm) . Turn anything into a Self-Watering Pot! It uses the Ø 10 cm pot from my Self Watering System . Includes : Self-Watering Bulbasaur Base You'll need the…
Santa brought some gifts: 5 new designs! Here you have the one for Rippa's Snarlfangs. Includes : Diorama Base (30x20cm total, 2-part assembly) Hex Terrain (1x, 2x, 3x) Printing : 0.4mm Nozzle 0.08 to 0.12mm Layer Height 2-3 Walls Infill…
Wall mount that works out of the box with the Lego Saturn V base, following the aesthetics of the original base. There are two options for the mount design: Skeletonized design: It's more in line with the industrial design of the Lego…
I've always been fond of sci-fi, that's why I find print-in-place, functional products fascinating. I wanted to tackle a new challenge, and this is the result: a set of ratchet screwdrivers that are useful, strong, and ready to go! From…
Simple yet elegant base to hold one of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
This is a mod for the ErgonoMouse inspired by Kempy's Steel Balls + Hall Effect Joysticks for smooth control. The mod is compatible with both versions of the ErgonoMouse. You'll find the description, print details, assembly guide and much…
These double bonds will perfectly fit 3D Printy's Giant Molecular Model Kit . Double bonds were missing from the original kit, so I designed the following variants with a similar style and the same assembly mechanism: Bonds New double…
I have some self watering pots that I purchased from the store, but I wanted some nerdy, 3D-printed designs with the benefits of a self watering system. So I made my own with some Base Negative Forms as tools to turn anything into a…
Fork designed for batch painting. Perfect for airbrushing multiple miniatures and weapons at the same time. You cal also scratch your back with it. There are two variants: Fork: works with the old Games Workshop painting base. Fork +…
You can now easily stack and store your QuBenchies in this box. It comes in three sizes and has openings on all sides to easily locate and and retrieve a cube should you need it for comparison. Capacity: 40 QuBenchies : QuBenchy Box…
Magnetized base for the Weber iGrill Mini thermometer and cable. The original comes with a black piece of plastic to roll the cable around, but it's not magnetized. I used to leave the iGrill Mini stuck to the fridge door, but the cable…
Some will call me the Moses of today because here I bring you: the Self Watering Rock ! Infuse your plants with such a manly, vigorous strength! This is a great example for my Self Watering Conversion Kit (Ø 10 cm & Ø 12 cm) . Turn…
You can now use the QuBenchy as a head for the awesome Dummy 13 by @soozafone ! This print includes the two pieces of the frame that are needed in addition to your QuBenchies: Dummy 13 - QuBenchy Shorter Neck.3mf : a shorter neck that…
Weapon armory stand designed for those who love magnets! There's room for 82 weapons / accessories. I used 4x2mm magnets on the holes. Careful with the polarity! NEW: You can test your printer capabilities with my QuBenchy - 3D Printing…
Simple yet elegant base to hold two of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
Simple yet elegant base to hold three of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
These are all currently available results.
![ErgonoMouse [Free version] - 6DOF Controller Knob & Joystick with Wheel, Buttons & Keys](https://media.printables.com/media/prints/973725/images/7443301_6431622c-6203-4049-abb5-c021b4241c1f_e177f1da-39c9-4328-8e49-8818ce495155/promo-knob-free.png)
![1-Way Ratchet Screwdrivers [Print In Place] [No Supports]](https://media.printables.com/media/prints/1215743/images/9123613_4137455d-f35e-4139-9165-0c21b117f325_dc9bd55c-f08c-4283-953c-6874a044ad31/ratchet_screwdriver_simple_main.png)
