Counting matching models…
Just something that I came up with for fun. It is addicting to play with and has so many different options to let your fingers fiddle with it for hours. If you liked this project, you can now support me by buying me a pizza :)!…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Just a simple crank for the extruder visualizer, you will need a 7x4mm magnet to attach it to the extruder as well as some glue. If you liked this project, you can now support me by buying me a pizza :)!…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I recently got a military backpack and wanted to attach a medical pouch to it. I found that there are attachments online but I did not want to wait for one. After a minute or so in CAD and 15 min of printing I got what I needed. I hope…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
How could a zipper pull not have a zip tie as a part of the design? I broke all of my zipper pulls on my jacket and had to replace them so I have made this zipper pulls that utilizes a zip tie. I have made two versions, one is the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
The JOSEPH JOSEPH dish drainer has a water drainage slide that is unfortunately too short to reach the sink in the house. The faucet's position does not allow the dish drainer to channel water into the sink. I designed a 3d-printed…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
I needed a stirring stick but didn’t have anything suitable, so I designed one that’s the perfect size and thickness to handle viscous silicone without breaking. It printed perfectly in PETG and worked great. The design is simple and…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
After purchasing laundry detergent and discovering the absence of a scoop, I decided to design and 3D print one tailored to my needs. Additionally, I created a minimalist version for those who prefer a simple, effective tool. Both designs…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
After using my previous wallet for around a year or so. I got to the conclusion that I can make it a little bit better by changing the initial concept with two rubber seals to just one bicycle inner tube. This also makes the wallet more…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
A slingshot I designed. You will need a special rubber tubing made for slingshots as well as two metal beads. you put the rubber tubing through the two holes and then insert the metal balls inside the tubing to keep them in place. If…
I designed this as often when I lay in bed, I don't have the energy to hold the book that I am reading with two hands thus, this object allows you to hold a book with one hand.
I wanted to try to see whether I can print something so thin (like a piece of paper) and make origami with. You will need a very well calibrated Z axis and first layer. If you liked this project, you can now support me by buying me a…
I needed a supporting bracket to hold onto a quite heavy shelf because the original ones broke due to the weight of that shelf. Thus, I designed this and simulated it to see whether it will withstand the loads that I was expecting. It…
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
I needed a bookmark, after careful consideration and finding the best possible simple bookmark design, I came up with this. I hope you like it.
Designed this tray specifically to hold the upcycling wallet with a pen, glasses and keys or earbuds. I hope you like it, happy printing!
This egg stand features a straightforward design, ensuring stability and functionality. It is optimized for quick 3D printing, with a minimalistic structure that eliminates the need for support materials, making it both efficient and…
The racks (apart from the 9 ball rack) all need a larger bed (such as the Prusa XL). I am currently using the 9 ball rack for a couple years now. I designed all of them to very high tolerances (higher than the ones they sell online) and…
Even though Prusa printers are amazing, I really didnt like the knob for the interface. I would press it and instead of choosing the thing I wanted, it would scroll down and choose the thing below. I made my own, and it works much better.…
This minimalist holder is designed to securely store and support standard Post-it notes (76x76mm) alongside precision stencils. The structure supports each stencil from three sides at all times, ensuring stability and accurate positioning…
I was fed up of constantly looking for coins or forgetting coins with me when going shopping. This is the design I came up with that I printed in hundreds of pieces for friends and family and it works really well. Just put it in straight…
Due to the low quality production of the Riese Muller charging cap for Superdelite bicycles by the company, I got to the conclusion that I have to takeover and solve this problem myself. I designed this cap to go over the original cap…
This is a box for an induction heater that I made. You will need: 4 x M3x10mm Head Socket Bolt (10 mm including the head) 4 x M3 Heat inserts (and something to insert them with like a soldering iron) 1 x 18mm→14mm Glass Water Pipe Adaptor…
3D-Printed Travel Case for Perfume Testers This compact, two-part travel case is perfect for carrying perfume testers (55mm x 10mm) on short trips, eliminating the need to pack large, bulky perfume bottles. The case is designed with…
Very simple and fast print, you will need a hair tie. I designed the hole to be big enough for most hair ties (Scrunchies wont fit). I made it symmetric so it does not matter which way you attach the hair tie.
This is a collection of mechanical keyboard switch fidget toys designed to reuse spare switches and give you something satisfyingly clicky on the go. Variants Included Each variant comes in Normal and Minimalist versions: Single switch…
This Witcher Medallion model has two holes for M3 heat inserts. I have designed a modular MOLLE system that has two holes in it that are compatible with this model. I hope you like it. There will be more to come with the modular MOLLE…
Since I got an Instax camera, I wanted to show off my photos in a nice looking way. I could not find any reasonable stand for my photos that would also show the messages that I have written on them. I found that Bobby's Instax Frame was…
I was asked to design a chess set, thus I ended up making unique and modern designs with handles that are extremely comfortable. I have not printed all, only some, thus I cannot say anything about printing and printing settings, however…
I got a new balisong trainer and it did not come with a bite handle marker, therefore I designed one myself. It is meant to distinguish between the handle that comes in contact with the blade from the handle that comes into contact with…
This compact shackle key is designed to help you securely tighten your shackle pin, ensuring it stays firmly in place and won’t loosen over time. Commonly used on sailing yachts to fasten rigging and secure equipment, it provides extra…
I was playing around with thin films and had the idea to make a finger drum, here it is! If you have an idea of possibly trying to tune it, lemme know! If you liked this project, you can now support me by buying me a pizza :)!…
I was fed up of fiddling around with the terrace doors when trying to close them from the outside. Sometimes, I would pull too hard and they would bounce back or they would be too fast and crush my hand. I wanted none of that so I…
I designed this wallet for my personal use. I am currently using it for at least a year with different iterations along the way. Here I have 4 different designs, two with a cutout for an emergency grocery cart key and two with no cutout.…
This 3D model is a simple and functional display stand for a billiards ball, designed in a triangular shape that mimics the classic triangle rack used in pool and snooker. It provides a stable base for showcasing a single pool ball or…
Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…
This is a growing collection of clean, practical leathercraft templates designed for makers of all skill levels. Each template is created with accuracy, usability, and real-world construction in mind, perfect for hobbyists, small-batch…
What you will need: 2 x m3x14 screws from the Prusa Research spare parts bag (I might be wrong, but that is why I left the dimensions below) 2 x m3 square nuts also from the Prusa Research spare parts bag Print Settings: All parts are…
Since I couldn't find an existing option for the MK4 printers, I designed one myself. The CAD model is available publicly on Onshape under the name Hex Holder MK4 . The initial fit is quite snug but improves with use. This minimalist…
Just an ordinary button that has a constant width with 3 holes for easy attachment to a garment of your liking
Whenever riding in the back seat of the Tesla Model Y, if you lean on your elbow onto the arm rest, the elbow sometimes falls into the cup holders. This print allows for filling those cup holders when not in use and thus, stop the…
Although the Hisense M2 Pro mini projector comes with its own box, I found that the box is often too bulky and inconvenient for everyday transport. Because of that, I designed this flexible TPU lens cover to keep the projector lens…
These arrow fins are designed to simplify fletching by eliminating the need for precise alignment and messy glue. The model consists of a thin cylindrical sleeve that slides over the back of the arrow shaft, with three integrated fins…
I was recently tasked with developing a Reverse Osmosis (RO) system that uses linear filters in order to significantly reduce maintenance costs for the client. Traditional screw-on filters are considerably more expensive, even though…
Really Difficult Gonggi is the ultimate test for seasoned players seeking a serious challenge. This advanced version of the traditional Korean game pushes your dexterity, precision, and strategy to the limit with intricate patterns,…
I have uploaded two Gcodes for the left and right side. For each side you will need: 1 x M6x16mm ((=== Button Head screw 1 x M6x16mm []=== Round Socket Head screw 1 x M6x30mm ((=== Button Head screw 1 x M6 Nyloc Nut If you would like to…
This is a knife block that holds kitchen knives. It allows you to position each knife in whatever orientation you would like and does not limit you to specific slots like the typical knife holders do. This model is pretty long to print…
After misplacing the original funnel for my blender lid, I designed a replacement that functions just as well, if not better. It is essential to use food-safe plastic for this print and to thoroughly clean the part after printing. The…
This is a simple 3D-printed accessory designed to securely hold and carry your oars when travelling to your kayaking destination. The clamps are designed to fit snugly against the rubber grips of the oar handles , making them very…
Modular Magnet Mount for CMF Phone 2 Pro – Unlock Endless Possibilities Add a whole new layer of functionality to your CMF Phone 2 Pro with this sleek accessory point magnet attachment . Designed to securely mount a powerful neodymium…
I designed a custom pull-out accessory box for the Bernette Sew & Go 8 sewing machine, inspired by a request from a family member who sews frequently. While the machine includes built-in storage, accessing accessories within its original…
This model is a minimalist modular cone made from three interlocking parts . The pieces are designed to print without supports and then mechanically lock together during assembly. I originally designed this cone for rollerblading/slalom…
The Gym Resistance Band Aligning Tool is a compact accessory designed to simplify resistance band setup for pull-ups and other assisted exercises. By aligning and lowering the band, it eliminates the hassle of awkward stretching or…
This bathtub outlet silencer is designed to noticeably reduce the noise that occurs when filling a bath. By redirecting the water so that it flows onto the wall of the tub instead of falling directly into the already rising pool of water,…
This is a 3D-printed travel case designed to safely transport a subcutaneous injector for Remsima , and it also fits Zymfentra injectors . The case was designed specifically for travel , where protection, insulation, and ease of access…
Shackle Connector Set – a modular system designed to securely link 5mm shackles in multiple configurations. This set includes two types of connectors: 1. Pole Connectors (for the shackle rod/pin side) Available with precision holes Or…
This chalk holder has been a project in the making for around 4 years. I’ve tested numerous designs to address the issues I found in commercial chalk holders and aimed to create a truly universal holder compatible with all types of chalk.…
These are all currently available results.
