P
PrintablesRaybo
Just a hair band.
Just a simple hair band with “teeth”. I printed a bunch for my wife, in multiple colors. I used PETG and 0.2mm height with enough perimeters to have them print solid.
- Downloads
- 2,813
- Likes
- 350
- Rating
- 4.95
All models
Counting matching models…
P
PrintablesRaybo
XT60 Connectors Plus Strain Relief
These are my take on some XT60 connectors. They are made to fit 3.5mm (4mm OD) connectors. They should be press fit, I had to use a small vice to press mine in place. On the male connector, I added a bit of super glue after to hold them…
- Downloads
- 487
- Likes
- 52
- Rating
- 5
P
PrintablesRaybo
Prusa MK2/S, MK2.5/S, MK3/S + X Axis Cable Support
Routing the cable to the rear instead of the left makes a nice loop and stresses the cable less at full Z height. Printed in Prusament PETG Orange at 0.2mm, 3 perimeters, 40% grid infill and no supports. It prints almost solid, so infill…
- Downloads
- 443
- Likes
- 96
- Rating
- 5
P
PrintablesRaybo
Ortlieb Clip for bicycle bags.
This is a replacement clip for an Ortlieb bag. Print with ABS or PETG at .2mm with supports. Perfect fit with satisfying click when closing.
- Downloads
- 378
- Likes
- 65
- Rating
- 4.71
P
PrintablesRaybo
Mod for 608 bearings and TPU tires at 150% scale.
This is a version that I did so I could use a 608 bearing and TPU tires. Print instructions I printed in PETG and the tires in TPU. Print at 0.2mm. Glue together body half's. The rest snaps, locks or press fits. Note: axle-b has a bit…
- Downloads
- 321
- Likes
- 61
- Rating
- 4.75
P
PrintablesRaybo
Extruder Cable Clip for Prusa MK2, MK2S, MK2.5 and MK2.5S (New Sticky version will work on MK3!)
Easy print, fits the Prusa MK2, MK2S, MK2.5 and MK2.5S. I added a new (Sticky) version that attaches with double sided tape. (3M, Gorilla, etc.) This new (Sticky) version will work on all MK2 and MK3 printers!
- Downloads
- 293
- Likes
- 56
- Rating
- 5
P
PrintablesRaybo
BEWARE OF THE DOG sign.
Simple sign. Print with color change at 2mm. My version printed with PETG Black for the first 2mm, then changed to PETG ed for the next 3mm to finish the sign. Drilled holes as needed to mount with wire ties.
- Downloads
- 266
- Likes
- 55
- Rating
- 5
P
PrintablesRaybo
KitchenAid Pro 600 Cord Holder
KitchenAid Professional 600 Cord Holder. Place to coil up the cord instead of wrapping it around the neck of the mixer. Prints as 3 pieces, no supports required. Any filament can be used. Uses 2 M3 20 Hex heads to assemble. Base piece can…
- Downloads
- 232
- Likes
- 40
- Rating
- 5
P
PrintablesRaybo
Wire Guide
Wire guide for multiple wires. Made for network cables, but could be used for any wires. 30mm diameter, so can hold well over a dozen cat 5/6 network cables. Just added a “loose” version with a wider cable opening. Fusion360 file included.
- Downloads
- 231
- Likes
- 36
- Rating
- 4.8
P
PrintablesRaybo
MK2.5 & MK3 Heatbed Screw Connector 60 Deg Cable Cover
Much nicer look with hex heads on top. No modifications are required to heat bed/cables in order to fit this cover on the heat bed with screw connectors. This has been tested on a heat bed with screw connectors. This does allow clearance…
- Downloads
- 230
- Likes
- 33
- Rating
- 5
P
PrintablesRaybo
Wide Mouth Jar Nesting Funnels
Wide Mouth Jar Funnels. They nest for easy storage. Small to Large, fits 49, 54, 59 63 and 70mm jar opening. Print one or a set. Can be used with dry or liquids to fill wide mouth jars. I printed in Prusament Galaxy Black PETG. Food safe…
- Downloads
- 187
- Likes
- 42
- Rating
- 4.5
P
PrintablesRaybo
Live-Z-Correction-Indicator
This is a small simple print to show the Z-Axis movement on Prusa printers. Prints top side down, just flip and install bottom side up on the printer. You can print 2 as is, or mirror one if you like.
- Downloads
- 73
- Likes
- 13
- Rating
- 5
P
PrintablesRaybo
2 color knob, easier to print.
This is easier to print version of a 2 color knob. Outside is wider and inside is less complex. I printed in Galaxy Black and Prusa Orange PETG.
- Downloads
- 61
- Likes
- 8
- Rating
- 5
P
PrintablesRaybo
Ortlieb bag wall mount.
Simple wall mount for Ortlieb bags. 4 pieces total per mount. Assembles with 6 M3 hex head screws. Supports only needed for pin. Sides print on their sides with 6mm pin hole vertical with chamfered side or hole on print bed. 4 - M3 16 or…
- Downloads
- 54
- Likes
- 16
- Rating
- 0
P
PrintablesRaybo
Exacto Handle Grip (for 8mm handles)
To make my Exacto knife handle easier to grip I created this. I printed mine in black TPU. It's a tight fit, but with some effort is slides on and stays put without any glue. It also keeps the knife from rolling around on my work bench.…
- Downloads
- 53
- Likes
- 9
- Rating
- 5
These are all currently available results.