Counting matching models…
Einzelne anreihbare Halter für WAGO-Klemmen (221-412, 221-413, 221-415). Sie lassen mit einem Schwalbenschwanz verbinden. Befestigt werden sie mit einer Senkschraube. Gedruckt in PETG, Layerhöhe 0,15 mm. Individual connectable holders for…
The mainboard fan of the Sovol SV08 is a little small. A much better cooling is achieved with an 8010 fan. Two of the original mounting screws are used, and you also need two M3 hammer nuts, two M3x10 screws and two M3 nuts. The fan is…
After removing the original cover, the contacts on the switch are open at 230 V. If you lift the printer at the bottom, you can easily touch them. This is prevented by the cover. M3 hammer nuts for 20x20 profiles and M3x10 screws are also…
The base plate can remain anchored to the ground even when the sunblind is retracted. The locking mechanism can simply be folded away and the base can be moved sideways and removed. Optional magnets secure the locking mechanism. A DIN 912…
For holding Gardena tap connectors in motorhomes. The safety catch prevents it from falling out when driving and opening. 6x2 mm magnets can be glued in to prevent unintentional opening of the bracket. Printed in PLA+ with 0.15 layer…
Hook for Dometic power rail to hang up a string of lights, for example
have replaced the original power supply unit with an LRS-350-24 Meanwell power supply unit. It is a bit too big, but a smaller one with 10 A was not available. The power supply unit holders are screwed to the 20x20 profiles. No changes to…
Dewalt Airlock for a 32 mm hose. The hose connection is rotatable. The connection is mounted with a piece of filament that is pushed through the hole. The cap can also be secured with a piece of filament, but it stays in place even…
Filament-Rolle für den SV04. Zusätzlich zu den Druckteilen werden zwei Kugellager 608, eine Zylinderschrauben mit Innensechskant ISO 4762 / DIN 912 - M8 x 65 oder 70 und eine Mutter M8 benötigt. Das Vorderteil wird aufgeschraubt und…
These are all currently available results.
