Counting matching models…
Simple box for housing ratgdo v2.53i. The lid is designed for the buttons to protrude above the surface of the top. If you feel like concealing them - raise the wall by another 5mm in the included Fusion 360 file. The top is friction-fit,…
I'm using Ecobee room sensors (the older style) as motion detectors and wanted to be able to adjust where they point. I have designed the mount to articulate in 2 dimensions, which combined with the way the sensor rotates around the cover…
A simple driver for a transaxle / transmission / transfer case / right / passenger side 91206-P0Z-005 / 91206P0Z005 / Honda Odyssey, Pilot, Accord, and Ridgeline - 35X54X8. Insert the seal into the driver, crawl under the car and smash it…
The model is designed to hold an arbitrary number of lever wire connectors. The top bar snaps into place. Included Fusion 360 f3d file can be used to change the number of connectors (Modify>Change Parameters>n_connectors). You can also…
This is a simpler version of the housing for the XY-T01 thermostat from https://www.thingiverse.com/thing:5679000 Note 1: There is no hole for the wiring - please punch through in your editor of choice according to the requirements of…
This is an attempt to create a parametric (customizable) OpenSCAD nozzle for the Ryobi high-volume low-pressure inflator that can be adjusted to work with a particular inflatable. The tip that comes with Ryobi is about 7mm, while most of…
The main goal of this model is to deal with random false Y-Axis crashes and layer shifts when printing in enclosure, particularly the Prusa Box / Printer Box. After some tests, I have tracked down the issue to the fact that crash…
This nozzle combines bostwickenator's Makita Blower nozzle base with my parametric 9mm nozzle that fits larger floaties like Intex etc. The standard nozzle that comes with Makita is 7mm and mostly works with small inflatable toys. My…
This model extends the 90 degree bracket from https://www.thingiverse.com/thing:3210401 to 138mm and provides parts to mount Logitech 9000 web camera to the Prusa Mk3S printer. To be mounted, the camera's clip/foot has to be removed - for…
Box designed to hold dies up to 19mm wide and up to 38mm (shorter row) and 50mm (longer row). It holds my widest die (insulated flags die 9PK-3003D42) and as well the longest one (9PK-3003D27). I am including my Fusion f3d file that could…
This is a simple model of cylinder that prints using 0.05mm layer height and Prusament PETG temperature settings. When printed in enclosure (I'm using Prusa Box aka Printer Box) at 125% speed, MK3S+ detects a lot of false crashes as…
This bracket allows mounting the G4 door bell camera with an angle that can be adjusted (in Fusion 360) to required degrees in both vertical (top/down) and horizontal (left/right) direction. The included stl mounts camera looking 35…
I have transferred the [PRUSA] Box mounting bracket from the top right part of the original design by DD3D to the seesaw version of the holder. The seesaw version is supposed to be a bit more reliable. The other top part can be taken from…
A simple holder Amazon Echo designed to fit on the back railing of Ikea Svarta loft bunk bed - keeps the Echo (2nd Gen). I'm including two versions: The "Small" version is a tight friction fit designed to hold the Echo without any…
This a remix of the nice-looking tapered feet adapter for [PRUSA] Box. When combined with rubber legs [PENN ELCOM 3/4" x 1-1/2" Rubber Feet for Amp/ Case/ Speaker - F1686/20] (https://www.ebay.com/itm/281067833790), the remixed legs are…
I've bought a relay board (https://www.amazon.com/dp/B00KTEN3TM) that looked the same as the original design. It ended up being a bit longer and a bit narrower. I've made a simple adapter bar to accommodate the board. The adapter can be…
This chain / sprocket / crank / chainring guard should fit 20" Trek MTB mountain bikes like MT60, and possibly 24" bicycles like Precaliber or Wahoo that have a 5-bolt guard with 150mm outside diameter similar to 'Dialed' part W292771:…
This holder takes an advantage of the opening at the razor head to keep the handle completely suspended. I had mold growing on the rubber parts in the past and wanted to keep the razor completely off the counter. Including both a counter…
Simple box to hold M6020 PWM speed controller with an input and output XT60 connectors. Prints without supports, the bottom of the box should be facing up. Requires 8-10mm M4 bolts & nuts for the top plate, 8-10mm M3 bolts & nuts for the…
Adapts a generic bell from Amazo( https://www.amazon.com/dp/B09L836G6Y ) to a 22.5mm Trek bike handlebars. I have measure the bell clamp to be 27.4 in diameter, although the product page says it accommodates up to 25.5mm bars. Prints with…
These are all currently available results.
![Steel Sheet Holder with seesaw eject button mechanism for [Prusa] Box](https://media.printables.com/media/prints/249834/images/2246295_bddc2993-450a-4b67-a933-52a149dae169/img_8754.jpg)
