198 models
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
A quick and easy chip clip. Has a tab for easy release and two lock positions for those extra chunky chip packets. Update: Added a slightly shorter, wider version. Update: Added versions designed for easy opening and a super-short version.
Update 19/11/23 - Added an extra large version. :D Multi-sort. A sorting tray I designed to quickly sort small parts - nuts, screws, bolts, electronic parts, lego, etc. Most sorting trays are designed to let you pick out a handful of…
A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…
A battery carrier/tote for Makita 18v batteries. It's stable and won't tip over even when fully loaded on one side. I've included two versions. A low profile one, with almost no space under the batteries, and a high profile version with…
A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…
An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…
This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place. Requires a pair of 10Ø x 3mm magnets. You can also purchase the .stl files for a 70mm, 100…
A box with drawers for lots of screws and things. Print the main case rear downwards and you won't need supports. Wall thickness optimised for a 0.6mm nozzle. Update: 10/12/23. A few people have had issues with tight clearance of the…
Ready for MMU. Print the partitions on their side with 0 top and bottom layers. I used honeycomb infill.
A big dumpster bin. Approx 200x150x145. It's a simple print. It doesn't need any supports and doesn't require filament or screw hinge pins, so should be scaleable up and down (within reason).
A box designed mostly for storing remotes, but useful for lots of other things too. Most is pretty self-explanatory. Uses eight m3 brass insert, six m3 12mm screws, and 2 m3 10mm screws. The tambour lid is printed with the bottom…
I designed this to allow me to mix and match storage options while using the same box design. The removable holders can store hex bits, 3.2 (1/8") and 6.4mm (¼") and 8mm router/dremel bits, or small parts. Boxes can also be divided up…
Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…
Works with Benchy and the E3D cart - https://www.printables.com/model/320875-e3d-cart-for-towing-the-benchy-and-cali-trailer A simple little trailer for the benchy that focusses on calibration for unsupported overhangs, bridging, linear…
I liked my earlier design, but found it tricky to extract individual discs sometimes. This design removes that issue as it uses removable “drawers”. The drawers are held in place with 10Øx3mm magnets though these aren't entirely…
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
These are customisable magnets for use with deck boxes, or anywhere else you can imagine. They are designed for these two deck boxes: The basic one -…
Remix of https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test A simple remix that brings the E3D Buggy, the Cali-trailer, and Benchy together. https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test…
The original Multi-sort sorting tray was designed for common 3D printer parts - M3 and M4 nuts and bolts and other small items. The Multi-sort V2 is designed for more variable sized objects like Lego. It has larger side chutes and…
Just the thing for keeping board games under control. :D This design provides a compartment for dice storage, as well as an expanding dice tower. Not only that, but there's a pair of rotating counters at the top of the tower. The box…
A small tool organiser for the most common tools used in 3D printing. It has room for: 1.5, 2, 2.5 and 3mm allen keys (tilted at an angle so they don't get in each others way). 2 x deburring tools (or glue sticks) 4 x small pliers 1 x…
This is a ground pod, and camera gimbal for wildlife and macro photography. It is mostly 3D printed, and just requires a couple of bearings and some nuts and bolts. It is quite strong enough to hold my camera (~ 1.6 Kg) and I wouldn't…
I like the TUSH ( https://www.thingiverse.com/thing:2047554 ) but it's a bit fiddly and requires care placing spools on it. I'm lazy, so I developed this tabletop spool holder. Just drop your spools on it and go. This design has quite a…
Design criteria: It had to be usable in the field or the lab. Therefore, it had to be compact and easy to store and transport, ……and that includes the magnetic stirrer bar….. And it would need to run on batteries, As it also had to double…
A relatively simply print. If you can print Lucky 13, then FIDO should be easy. Use the same print settings as Lucky 13 – 0.15 layers, no brim or supports, and a 0.15mm elephant foot adjustment. PETG is best. Should take an hour or two to…
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
This is a charging stand for Philips 5000 series (specifically S5582/20) electric shavers. The design uses a sleeve to clamp the cable. Please check that your charger plug is the same as that shown in the image. If it is different, then…
Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment. This a remix of MattyVee's idler from https://www.thingiverse.com/thing:2786671 (though I'm not sure there are any original parts left)…
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
This picture frame is designed to fit any rectangular sized picture and requires no supports. In PrusaSlicer: Scale the X and Y dimensions for the back plate to the dimensions of your picture (e.g., 150mm x 100mm) Then scale the length of…
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
This is an updated version of my CCG card box. It now features a magnetic latch. The pivot plates are gone, and the lids now just click into place. Requires a pair of 10Ø x 3mm magnets. Base and Cart are printed right side up. Lids are…
The single fan duct on the Adventurer 3 is pretty rubbish. I've designed a dual fan duct that splits the flow so that both sides of a print are cooled. The results speak for themselves. The original duct is on the left in the overhang…
A set of clamps for CNC routers and mills. Designed for M6 bolts. No supports needed. The main hold-downs print on their sides, with just a small bridge needed for the bolt holes.
A gutter cleaning tool. Goes on the end of a painters pole thanks to the threads by Halley ( https://www.thingiverse.com/thing:84774 ) I printed it in PETG, and it seems rather robust. :D
Easy print little bin designed to tuck under a desk. Has a depth of 80mm. Folds out for use. To remove for emptying just open the bin, lift it a few mm, and slide it forwards. Can probably get away without supports, but it may be worth…
Designed to print with either no supports or minimum supports, and orientated so that there are no weak points, particularly at the leg clamps. There are two versions: Gimbal Lock.stl, which is about the same dimensions as the original…
These holders are designed for metric drill sets, and have a space for 1 to 10mm bits at 0.5mm spacing, 11, 12, 13, and the tap drills 3.2, 3.3, 4.2 & 4.8. Holes were a fraction tight on mine. I'm not going to redesign it. Just bore them…
A box designed mostly for storing remotes, but useful for lots of other things too. Most is pretty self-explanatory. Uses eight m3 brass insert, six m3 12mm screws, and 2 m3 10mm screws. The tambour lid is printed with the bottom…
My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension. Here is a design for some thumbscrews that can be pushed onto 40mm M3 screws to adjust the tension without an allen key. They…
Update: 9 July 22 - Added a new extruder design. It's designed to work with an LGX Lite and Dragon (and maybe Mosquito) hotend. It's designed to be ultra-compact and will enable you to scrape in a 400x350 bed if you wish (I run and…
A simple deck box, with room for 100 double sleeved cards, and magnetic latching. The key feature though is the quick swappable and customisable badges, allowing the deck boxes to be customised to the game or deck that you are playing.…
I often use my soldering iron for short projects, before putting it away. I don't like the wet sponge for cleaning soldering irons as it needs to dry out before storage. Curly brass cleaners are ideal, but most holders aren't ideal for…
It is designed to fit over any clothesline with a line diameter of 5mm or less, and has a spring clip embedded in the central support tower that prevents the basket being knocked or bounced off the clothesline. It is quite large, with a…
I've been using this design (https://www.printables.com/model/5743-screw-and-small-parts-storage-container-and-drawer) for years and decided it was time to turn it from something just functional, to a drawer system that's really nice to…
A universal geared Planechase deck box. I'm making this model freely available for personal use (see license). When the box is opened the cards rise up "for easy access", and totally not "because it looks cool". The box locks closed with…
I intended to make the filament cutter from Vetterick, but my hardware store didn't have any suitable springs. Here is a remix of the design that doesn't require any springs or screws. Just 3 sections of a blade for 9mm box cutters. To…
A simple travel case for the Philips Sonicare 2100 electric toothbrush. Uses eight 10x3mm magnets.
I needed a nutcracker, so here it is. The hinge mechanism is inspired by Gyrobot's aerospace nutcracker. This is a print-in-place design with 0.2mm clearance. No supports needed. Added a second version with a slightly smaller “small” side.
Makes the normal mini-cupholder in a Skoda Yeti a more useful size. Was designed for a 2011 Yeti. Also includes a version for holding 600ml milk cartons. :D
When prototyping things, I like to use the cables with dupont connectors to join up Arduinos and other bits and pieces. I made these to hold 4 to 7 dupont connectors together in a little bundle. You'll need a well dialled in printer to…
Just added a lip on the top surface of filimonic's anti-splinter device design for a more secure fit.
Dust extraction nozzle for a Makita 18v Jigsaw (DJV180). May fit other models as well. The outlet nozzle is identical to the outlet of Makita's little 18V trim router.
This is a super simple filament presence and jam sensor. Sensing filament is simple, and is often done with just a simple microswitch. However, many spools of filament have an annoying kink at the end of the roll where the filament is…
If you look along the Z-axis supports (the ones with the bearings), you'll probably notice that they curve due to the weight of the bed. This was a concern for me as I don't want the bed flexing as more plastic gets added to a print. Many…
Replacement clamp to mitigate the issues of rods being too short or pulled into the extrusions. Designed for the X5SA Pro 330. Not sure about other models. The screw holes on the X5SA are not precisely equidistant from the Z-axis rod.…
A fruit picker. Easy print. No supports. Uses a standard stanley/utility knife blade. Also includes a larger version that only just fits on the Prusa's bed. Requires a pair of m3 10mm bolts and brass inserts. Screws onto a common painters…
A wall mount for the Sunlu S2. Needs a couple of 4mm or so screws to attach to the wall, and a pair of 40mm m8 nuts and bolts (though you can get away with a longer single m8 bolt if you want). Also needs 4 M3 brass inserts to hold the…
This is an older version. Version 2 of this design is available here and has significant improvements. https://www.printables.com/model/1341290-dust-extractor-for-makita-18v-routertrimmer-drt50z Most router dust extractors are terrible at…
This is the CAD file for the Regnans CoreXY. Regnans aims to achieve a very balanced machine combining simplicity, performance and a large build volume. It is designed with several principles in mind: Simple design and maintenance. All…
Belt guard for X5SA 330x330
A porthole/deck hatch for kayaks, boats and other similar uses. Has an opening of around 155mm diameter. The thread may be a bit stiff at first, but should free up with some use. Update 23/12/17: Increased tolerance a bit to allow for…
A minimalist hard case for the DJI Neo. The lid snaps shut magnetically, and there's a sliding hatch to enable charging of the Neo inside the case. The case has been designed to fit the drone with prop guards and gimbal cover perfectly so…
I love 3DBROOKLYN's original SD Card Mountain. It's an excellent and beautiful design. I have two printers and prefer to use different SD cards for each. I also have more than 5 SD cards. Therefore I've remixed the original design to: 1)…
A replacement front, back and side grip for an E-M1 II, solving the pesky problem of the original rubber grip expanding and coming loose. Recommend printing in Nylon/CF. Includes integrated supports. I designed this by using a…
Reinforced motor mounts. Shouldn't need support.
A blank commander tray template for users to develop their own versions. This template fits the Command Hub Deck Box. Includes the STEP and STL files. If you want your design to fit into the deck box, the maximum thickness is 4mm.…
This provides a solid mount for the idler pulleys, and a stop for the Y-Axis if you're using sensorless homing. Also clamps down properly on the Y-Axis rails without the little gap that the stock mount leaves.
I wasn't sure if I should post this in everyday essentials. However, for some of us working in fields where we need to be able to share and pass around objects, be it for education, research, design, etc, having the ability to digitise…
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
Tested now. Seems to work well. :D At some stage I'll tweak it a bit more to thicken up some of the walls. The MMU idler door for the MMU2s is a nuisance to open, as the lever used to activate the sensor interacts with the extruder body.…
A preliminary test of the spherical gear. No tolerances specified yet, so it's going to be tight. You'll need to separate the parts prior to printing, and unless you've got unbelievably good supports, split the main spherical gear too.
A case for reciprocating/sawzall blades. Holds blades to 250mm long. It's designed to make it easy to access the saw blades. Uses eight 10x3mm magnets.
A key for opening 200l plastic drums. These plastic drums are easy to acquire, and are useful for many things. This key makes them easy to open.
Some feet that can be used to lock the “yarnspooler” filament spooler down. Original model https://www.thingiverse.com/thing:2863263/comments
Lifts the camera up enough to see a Prusa's print bed.
I like the Makita handheld vacuums, but the filters clog quickly. The cyclone attachment resolves this, but makes it a bit unwieldy. This design adapts the cyclone attachment (https://www.makitatools.com/products/details/191D70-5)…
This is a remix of radus's Honeycomb vase, designed to fit lamps with a 42mm base. I printed it in PETG, and used a dab of superglue to hold the top and bottom piece together. Print the main piece in vase mode, and the bottom piece…
A design for a dust boot with a TPU seal (though can use the normal bristle brush). This is not a universal fit. You'll need to check compatibility with your router. Uses eight 10x3 magnets, and a few m3 screws. Print the TPU in whatever…
Chompy, The Filament Shark cuts the ends of your filament leaving a nice 40º shark bite across the end of the filament. Chompy doesn't leave filament ends everywhere, and has a big stomach for holding many filament ends. When Chompy is…
Added a filament guide at the sensor, a few tweaks for easier printing, and a detent to prevent the main gear lifting.
Laundry/kitchen detergent scoop. Holds 30ml. Has a nice sturdy handle and sharp corners for getting into corners.k
A bowl designed in the shape of the leaf of the Nothofagus gunnii (Tasmania's deciduous beech or Tanglefoot). It's intended for CNC carving, but is also suitable for printing. Use a low layer height to keep the bottom of the bowl smooth.
A wall mount for the Sunlu S4. Easy print. Print on its side, no supports needed. Update 17/08/24 - added super chunky version. :D
The Revopoint Mini has a very small scanning window, which makes targets tricky to use. This small pedestal enables strong geometric registration and alignment without using targets. I may also develop an 8 sided version in the future to…
Tap and Go or Contactless card transactions are widely recommended as the safest option when shopping. However, many machines still require that you press the card against the machine. The Card-i-Glove is like a glove for your bank card.…
A storage for the useless tray in the top of the 2022 Mitsubish Triton. Includes a spot for fuel/credit card, pens, chapstick, and general storage. There are two options with different sized pen storage areas. Update 18/08/24: added…
Simple belt tensioner for the X5SA pro. Has enough clearance to clear the left X-axis plate if using sensorless homing.
X5SA Pro pulley supports for toothed idlers. Includes support at the top of each bolt so that the idlers can run freely. It is designed to work with idlers ~8.6mm across. Print 2 x 2.6mm spacers and 4 x 1.6mm spacers. Print a normal and…
Had to stop a Leica GST120-9 survey tripod from rolling around the car. A quick little design and print, and the "Leica Leg Stoppa" was invented. This little gadget clicks onto the top of the legs and stops them from rolling. It can…
I made this as a bit of a joke for my workshop. Someone asked for it, so here it is. Original source is the Instructables' Knifeblock - https://www.instructables.com/Deadpool-Knife-Block/
A set of wall hooks, with both staggered and in-line hooks. Includes both adhesive and screw mount options.
Laptop Stand (designed for Dell Precision 7550 but fits others too). Simple print. Uses 30mm m5 nuts and bolts. Sits the laptop up nice and high as a second screen, with room for a dock underneath.
Prusa Mk4s have quite deep "wells" for the Z-axis motors. These dust covers just stop stray filament falling in them. Also work for a lot of other printers. They have a 25mm external diameter. 0.4mm nozzle likely required.
A mini geared box, originally designed for the World's Smallest M:TG game. To assembly place the cart on the flat surface. Place the lids in the open position and place the gears of the lids and cart together. Then drop the entire thing,…
Had to quickly adapt my X5SA to a direct drive. This uses an: • E3D hotend (1.75 direct drive or universal). • The Titan extruder • A pancake stepper motor (…
