Counting matching models…
These tape roll holders should print easily without supports. They are made for tape rolls that have a 75mm inner diameter and 15mm and 30mm thicknesses. You'll need a hollow insert to mount one to your HSW.
2026 Update: I tapered the Peg so that the further you push it in, the tighter it becomes. A very straight forward scissors hook for your Honeycomb Storage Wall. It's easy to print and uses very little material, and it fits into a hollow…
I made this to hold my 5 (remaining) needle files. The files slot into place with a satisfying ‘click,’ but you can also pass a thinner section through the slot and drop them into place. PETG is recommended and it should print without…
Easy, minimalist print to hang your Solder Scroll on your HSW in style. Update: Just uploaded a version that doesn't include my maker's mark. Update 2026: I have updated my maker's mark, and tapered the mounting peg out so that it holds…
Pretty straight forward, this design uses to hollow-inserts to slot into the HSW system. It should print without any supports. Quick and minimalistic! I improved the use of space for this design by adding a clippers-holder to the front,…
This model should print easily without supports. You will need an M3-insert and two hollow-inserts to mount this to your HSW, but once it's up there, it should be able to easily handle a full bottle, keeping your bed cleaning solvent of…
I made a mount for the Hex Key EZ handles that is compatible with the HSW system. I also rotated the numbers to make them more legible when the short ends of the hex keys are faced away from the wall. I hope you like this mount and post a…
Print Settings Normal print setting should be fine with layer heights of 0.2mm or lower. The Coupler has built-in bridges that remove the need for any supports or counterbore bridging. You may want to try printing the Collets slowly with…
My silicone handles have been breaking for some time but it only recently occurred to me to replace them with TPU. I found a few other models but they were very different from the originals so I tried to match the contours of the stock…
Update 2026: I have a new printer and I now realise that a lot of the allowances that I had for this model are excessive with newer printers and slicers. I added a outward taper to the pegs so that they hold tighter and decreased the…
Origin After trying many different filament clips with none of them working quite perfectly on different spools, I decided to make my own. I wanted my filament clip to work across a wide variety of spools while holding the filament very…
I love qwerty's original design, the base plate makes it so versatile but I wanted to use my purchased helping hands in conjunction with these ones. I started redesigning the base plate when I realised that threading could be easier to…
2026 Update: It came to my attention that some of the allowances I left for printer error are no longer needed or helpful, I have updated the models to reflect this. I only updated the single-peg models as they are the most efficient. The…
I don't know about you, but I really like the sleek, polished look of the Kobra X, but those little aluminum bars that hold up the X-Axis, with an empty screw hole, felt a little bare to me. So I got out my calipers and took some…
I set out to make an air duster that could be easily modified right from your slicer. To do this, I made the bellows portion one solid model so that you can change how firm or how soft you want you make it! Just using your normal TPU…
I loved the original design but I wanted it to hold my side-cutters instead of scissors and it worked out better to narrow the whole thing to do so. I also added a brush hook on the side cause I needed somewhere to put my nozzle cleaning…
Print this multi-faceted model in Granite PLA (or similar) to replicate the intricately carved stone of a mighty dwarven flagon! You will need supports for the handle which is designed to print as neatly as possible, minimizing the…
I was very surprised to discover that I couldn't find a printable bookend featuring a raven anywhere on the internet. Naturally, I had to make my own and, while I had a very clear vision of what I wanted, I currently lack the skills to…
The 'Frame' pieces are fairly efficient as they only needs about 5 filament changes when printed how they are oriented. I used Anycubic Grey PETG to match the printer, and Overture Black PETG. The 'Deflector' pieces are quite wasteful as…
I made this as I was unable to find an X-Tensioner Body replacement part on Thingiverse though I have needed one for some time. I think this worked out to be a pretty straight forward, drop-in replacement part with no customization needed…
I only had 4mm Capricorn tubing on hand so I remixed this to allow for that as well as removing overhangs greater than 55 degrees to make it easier to print. I had to heat a little longer with the thicker walls but I also had to allow it…
This knob is compatible with Ender 3 and Ender 3 v2. The design is meant to represent the Triforce from the Legend of Zelda franchise while still appearing aesthetically similar to the original knob that comes with the Ender 3 v2. I…
This is a remix, I just added the words on the base, so send some love to the original creator. Make sure you have your travels and retracts dialed in well because this model has a lot of open air time and using combing (as I found out…
UPDATE : After my wife accidently broke my last wrist rest, I decided to strengthen the joinery between the frame sections. I added a large dove-tail to both joints (MkIV.3mf files) and I think this makes it much stronger as well as…
This Foldable Stand is designed to work with HugoHuge's Filler Filament Holder. I have a printer mounted spool holder but I wanted to have a desk top stand as well in case I needed to move the filament away from the printer for any…
This self-centering roller keeps your cardboard spools from walking off the holder while still featuring a wide flat section to accommodate spools that have a flat interior perimeter. The interior is hollowed out to cut down on print…
Sci-Fi Stackable Storage Trays I wanted strong trays to help organize my work space and I wanted them to look a little industrial and futuristic so I aimed for a Sci-Fi theme. I also wanted to be able to subdivide those trays to get…
Ever feel like the printer would make so much more sense with the screen on the left side? Have a pesky wall in the way that you keep accidentally punching every time you rush to tame a spaghetti monster? Maybe your left handed and feel…
UPDATE: I added lock/unlock symbols to the case just to make it easier to open and shut. I needed a something to keep my soldering iron tips and heat-set insert end from rolling around in my electronics-tool case. I got a little excited…
2026 Update: It came to my attention that the allowances I had left for printer error are no longer necessary or helpful with modern printers and slicers. I have update the models' pegs, as well as adding a two peg version, so that the…
Edit: I needed to reprint this in PETG as the bottom of the PLA+ started to warp from the heat of the build plate. I strongly recommend using PETG or better. This is a Remix of both Schnabulation's and SLcoolK's remix. I needed slightly…
This mount uses double dove tails to securely hold the guide in a way that won't wiggle or sag but still slides apart with ease for quick transitions from mount to mount. The Guide now features clips to hold the bearings in place, no need…
I really like the original but I wanted to print it with more precise dimensions and different colours and by breaking up the design I was able to do just that! I added an extra micro SD card slot and tightened up the nozzle holes. I also…
MissWashu did a wonderful job remixing the original knob but I prefer my knobs to be a bit more substantial so I decided to revisit my original design as inspired by MissWashu's brilliant idea. Both of these pieces do need supports but I…
Description These Star Wars inspired poster tubes are as long or as short as you need them to be! Just print the lengths you need, just keep in mind that the caps add about 40mm. The hexagonal shape and indents add rigidity while…
I had been using and enjoying the original bottom connector for some time but when it came time to do a partial disassembly of my printer I decided to make some quality-of-life changes. To start with, my X-axis chain kept popping off. I…
I know not everyone will use the same tools as I do, especially the ones I've purchased but I thought this might at least be a good jumping off point if you like it so I have included the .STEP file so you can modify it to your hearts…
This is an easy to print hook that fits firmly on the end of your pool-pole so that you can retrieve your pool cleaning robot vacuum from the deep end without getting wet. I got a wireless pool cleaner. The hook it came with quickly…
Why I made these: Last year, I made some storage trays and organizers, aiming for a sci-fi theme. I fell a bit short in my opinion, so when I was reorganizing my work space around my new printer, I decided to revisit them with another…
I set out to make a minimalist HSW holder for my filament storage system's vacuum pump, but half way there, I realised I already had a great little platform to display things like calibration models. The platform is super easy to print,…
When I found that the mounting screw for the x-axis tensioner cover on my Kobra X was stripped out, I thought about trying to repair the hole, but that felt like kicking the can down the road. So I got out my callipers and took some…
Introduction: Hi there! This is the Phlex Phraim, a modular rack system for your 250g spools! This is designed to be printed in either vase-mode, or 'fake'-vase-mode. Each Phlex Phraim should only take about 55g of PLA and print in less…
This is a simple HSW spray bottle holder, nominally for bed adhesion spray. It is very easy to print with normal setting though you will need a 3mm screw insert and a hollow insert from the original HSW which you can find here: Just…
These are all currently available results.
