Counting matching models…
Socket holder 10-22 metric The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Used with 1/2" drive ratchet. Print with 10% gyroid/grid infill and no support. You…
1-13 mm drill bit holder A standard set of 25 drill bits, size : 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13 mm. The drill bit holder has a 8° angle, which makes it easy to…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Hex bit holder Print standing with 10% gyroid/grid infill, and grid support from build plate only. The hex bit holder couples with the attachment plate module , print one of each and you have what you need to hang hex bits on…
With this adapter you can attach toolholders from the MODULA system. This is a universal adapter for (metric) PEG boards, this one fits Biltema, Jula, Clas Ohlson, and many others world-wide, CC 12mm (15/32 inch) spacing of the 4mm (5/32…
Socket holder 8-22 metric, 3/8" drive ratchet. The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Printed with 10% infill. You can hang it on a peg board…
LED strip clip I wanted to have a minimal, very easy to print led clip (since original tape lasts 1 week..), so the design opted for a no support, no brim, perfect print, quick print and small filament requirements (< 1 gram). Sleek…
Socket holder 23-32 metric The socket holder uses a gridfinity 2x4 bin. Its made for metric sockets 23, 24, 25, 26, 27, 28, 30, 32 (Biltema). Used with 1/2" sockets. Print “standing” with 10% gyroid/grid infill and no support. You can…
Lathe tool holder There's a right and a left tool holder. Print standing with 10% gyroid/grid infill, and grid support from build plate only. The tool holder module couples with the attachment plate module, print one of each and you have…
Hex bit holder, gridfinity 1x2 bin. There are four deeper slots for those longer bits. Print with 10% gyroid/grid infill and no support (slicer might suggest to fix an error in the .stl if so then do that). It fits the Gridfinity…
Socket holder 4-13 metric, 1/4" drive ratchet. The socket holder uses a gridfinity 2x2 bin. Its made for metric sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13. Print “standing” with 10% gyroid/grid infill and no support. Used with…
Hex bit holder, gridfinity 2x1 bin. Print with 10% gyroid/grid infill and no support, slicer might suggest to fix an error in the .stl (if so then let prusa slicer auto do that by a simple right-click). It fits the Gridfinity universe, it…
A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.
Gridfinity 2x4 bin to start your own organizer design This is a "vanilla" gridfinity bin with body for making something You need to "gridify" Personally I use them to organize tools . Fire up any of the CAD programs and punch some holes…
Gridfinity 2x3 bin to start your own organizer design This is a "vanilla" gridfinity bin with body for making something You need to "gridify" Personally I use them to organize tools . Fire up any of the CAD programs and punch some holes…
Dremel router attachment A simple router attachment for the regular Dremel. This adapter is used with a Dremel 2 flute end mill. Specs 2 flute end mill: 63,5mm (2-1/2") long, 3,16mm (1/8") in diameter. Use it as a router, scraper, shaping…
Morse Taper 2 (MK2/MT2) x 1 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang…
Print standing with 15% grid infill, organic support everywhere. Print all the parts, then insert brass press-in nuts as seen on the pictures. Cut wires to 60mm lenght. Setup Parkside connector like this Just place Parkside connector…
Socket holder ½ to ¾ sae The socket holder uses a gridfinity 2x4 bin. Its made for sae sockets ½, 15/32, 7/16, 3/8, 5/16, 9/16, 19/32, 5/8, 21/32, 11/16 and 3/4. Used with 1/2" drive ratchet. Print “standing” with 10% gyroid/grid infill…
Module ½-inch socket extension bar holder It holds 4 extension bars and has an 8° angle, which makes it easy to reach the extension bars. The holes are 18mm (11/16") and the extension bars usually has a diameter of 16.5mm (5/8"), so there…
Gridfinity 2x5 bin to start your own organizer design This is a "vanilla" gridfinity bin with body for making something You need to "gridify" Personally I use them to organize tools . Fire up any of the CAD programs and punch some holes…
Jumperwire holder You need to print the "holder base" and glue it together with the "jumperwire holder". Print base “on it's back” with 10% gyroid/grid infill and grid support from build plate only. Print comb “on it's back” solid with no…
Socket holder 1-1/4 to 25/32 sae The socket holder uses a gridfinity 2x5 bin. It's made for sae sockets 1-¼, 1-3/16, 1-1/8, 1-1/16, 1", 15/16, 7/8, 13/16 and 25/32 (Biltema). Used with 1/2" drive ratchet. Print “standing” with 10%…
Morse Taper 3 (MK3/MT3) x 2 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from build plate only. The tool holder module couples with…
Folding rule holder It holds the folding rule at an 4° angle, which makes it sit steady. The holder is 36 x 18mm (1-7/16 x 11/16"), which should fit most of the rule's out there. I've tried it with the closest 3 rulers at hand, and it…
Morse Taper 3 (MK3/MT3) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…
Pencil/tool holder for peg board or wall mounting. It's also worth mentioning that it stands just fine on it's own on any flat surface. It has an 8° angle, which makes it easy to reach the pencils/tools. Print “standing” with 20%…
Socket holder 5/32 - 1/2 sae, 1/4" drive ratchet The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 5/32, 3/16, 7/32, 1/4 9/32, 5/16, 1/32, 3/8, 13/32, 7/16 and 1/2. Print “standing” with 10% gyroid/grid infill and no…
Caliper holder A holder for a digital caliper (also works with a non digital) can be used on wall/peg board. Print “on it's back” with 10% gyroid/grid infill and support from everywhere. The tool holder module couples with a attachment…
Morse Taper 4 (MK4/MT4) x 1 drill bit/tool holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from base plate only. The tool holder module couples…
1 2 3 block holder. The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang a 1 2 3 block. 1 2 3 block size 2-15/16 x 1-15/16 x 63/64" (75x50x25mm). MODULA - a module based…
Same as the old original design except 14mm less wide. The gain is that you can place them snug together side by side, and hence can put overlapping gridfinity bins. In order to handle a lot of weight its not possible to go with only 2…
Gridfinity 2x4 bin holder for the modula system The holder has room for 2x4 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 2 adapaters biltema (or vanilla adapters ) to peg board/wall…
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
Sony Pulse 3D Wireless Headset holder Print on "it's back" with 10% gyroid/grid infill and grid support from build plate only. This headset module couples with the adapater biltema (or the vanilla adapter ) so You need to print this…
Gridfinity 2x3 bin holder for the modula system The holder has room for 2x3 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 1 adapater biltema (or vanilla adapter ) to peg board/wall…
Pencil holder for peg board/wall mounting. Wall mounted pencil holder or any other object You need to store on a wall. It has an 8° angle, which makes it easy to reach the pencils. Print “standing” with 20% gyroid/grid infill and grid…
9x hex bit peg board holder It's made for the taller hex bits that need deeper slots and wider space. Print standing with 10%-20% grid/gyroid infill and organic support from build plate only. The hex bit holder couples with the attachment…
Torx and allen socket holder for 1/2" drive ratchet. The socket holder uses a gridfinity 2x4 bin. Its made for sockets TX30, TX40, TX45, TX50, TX55, TX60, HW5, HW6, HW7, HW8, HW10 and HW12. Used with 1/2" drive ratchet. Print with 10%…
1/2" socket wrench holder it's pretty generic and should fit most socket wrenches out there. I printed it upside down with 10% infill and organic support, to get a nice smooth top surface. You can hang it on a peg board or wall with this…
Gridfinity bin socket allen key holder Supports allen keys size HW4, HW5, HW6, HW7, HW8 and HW10. Used with 1/4" drive ratchet. The socket holder uses a gridfinity 2x4 bin. Print standing with 10% grid/gyroid infill and no support. You…
3/8" socket wrench holder it's pretty generic and should fit most socket wrenches out there. Print with 10% gyroid/grid infill and organic support from build plate only. You can hang it on a peg board or wall with this adapater biltema or…
Module 3/8" socket extension bar holder It holds 3 extension bars and one t-bar and has an 8° angle, which makes it easy to reach the tools. The holes are 13mm (~1/2") and the extension bars usually has a diameter of 12mm, so there is…
Socket extension bar holder for 1/4" drive ratchet The socket extension bar holder is pretty generic and should fit most 1/4" extension bars out there. This one also have room for a flexible extender. Print it with 10% gyroid infill, and…
Socket holder 9/16 - 3/4 sae, 3/8" drive ratchet. The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 9/16, 19/32, 5/8, 11/16 and 3/4. Print with 10% gyroid/grid infill and no support. You can hang it on a peg board or…
Gridfinity 2x2 bin holder for the modula system The holder has room for 2x2 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 1 adapater biltema (or vanilla adapter ) to peg board/wall…
Socket wrench 1/4" and sliding t-bar holder combo 1/4" socket wrench holder it's pretty generic and should fit most socket wrenches out there, the same goes for the sliding t-bar. Print it with 10% gyroid infill, and support organic on…
This is a universal cap, it will fit many rim, in this case a set of 22" rims. Dimensions rim: 22" Center hole 83.5mm (3 5/16") Dimensions cap: Outer diameter 86.5 mm (3 3/8 ") Inner diameter 82.2 mm (3 1/4") Height 5 mm (3/16") If…
Long socket holder 4-13 metric, 3/8" drive ratchet. The long socket holder uses a gridfinity 2x4 bin. Its made for metric sockets 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13. Print with 10% grid/gyroid infill and no support. You can hang it on a…
Tool/socket holder for a cardan-joint, a hex bit adapter and a expansion step tool. The tool/socket holder uses a gridfinity 1x2 bin. It's made for a cardan-joint, 1/4" to 3/8" expansion step and a 1/4" Hex bit holder. Print it with 10%…
1/2" sliding t-bar holder It holds one sliding t-bar, it has an open front and an 8° angle, which makes it easy to reach the extension bars. The shaft is 14.5mm (5 ⁵/₁₆") wide and sliding t-bars usually has a diameter of 13.5mm (5…
Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…
Socket holder for 1/4" drive ratchet hex bits in a 1x2 gridfinity bin The socket holder uses a gridfinity 1x2 bin. Its made for hex sockets size 3, 4, 5, 6, 8 and 10 metric. Print it with 10% gyroid infill, no support. You can hang it on…
Old design, there is a new design made, Youll find it here . Changes made in new design, they now can be placed snug together side by side, and hence can hold overlapping gridfinity bins. This one is left here for compatibility reasons.…
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Gridfinity bin for torx, allen bits and a 3/8" socket adapter The bit holder uses a gridfinity 1x2 bin. Holds nine larger 5/16" / ~8mm hex bits and one 3/8" socket to 5/16" (~8mm) adapter: T-55H, T50-H and T45-H (Torx - Tamperproof) 10mm,…
1x1 Gridfinity holder bin for threaded insert soldering tips Soldering tips for threaded inserts M2 2-56", M2.5 4-40", M3 M3S, M4 8-32", M5 10-24", M6 1/4", M9 5/16" You'll find it as a kit anywhere amazon aliexpress banggood ebay temu .…
Universal Vanilla Adapter This is a universal “vanilla” adapter for PEG boards/Wall mount, use this as a base for Your custom peg board or other surface you need to hang modules on. Fire up Your CAD app and insert screw holes, pegs or…
Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…
Gridfinity bin adapter holder 1/2" ratchet to standard hex bit adapter 1/2" socket to allen key 11/16" (17mm) adapter. 1/4" socket to allen key 1/2" (13mm) adapter. The adapter holder uses a gridfinity 1x2 bin. Print standing with 10%…
Base Backplate Vanilla This is the the dove tail backplate, Youll use it to cad Your own tool holders and organizers for the Peg board/Wall mount MODULA system. Included are 1x single backplate and 2x 3x 4x for larger tool holders. There…
Gridfinity bin for soldering tips It has a 1x2 bin footprint. Used for Weller (WE1010) soldering tips ø 5.25mm (3/16"). The bin holds 12 pieces. There's no lip on the bin since You can't stack it anyway with tools inside. Print standing…
Tool/socket holder for a cardan-joint, step down and a expansion step tool. The tool/socket holder uses a gridfinity 1x2 bin. It's made for a 3/8" to 1/4" step down socket, 3/8" to 1/2" expansion step socket and a cardan joint. Print it…
Screw extractor and centre punch holder A holder for the all so important centre punch and the screw extractors. The holder couples with the attachment plate module, print one of each and you have what you need to hang it on a…
Parkside (Lidl) 8x mini socket kit 4, 4.5, 5, 6, 7, 8, 9, 10mm The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang a Parkside socket set. MODULA - a module based tool…
Wrapmaster 1000 spare parts My +15 years old Wrapmaster 1000 broke. The left cling wrap spool holder decided to give up on life… So I decided to CAD a new one, it's not a replica of the original, but a fully working and in my mind a much…
Gridfinity bin for socket adapters The adapter holder uses a gridfinity 1x1 bin. Fits 3 socket adapters: 1/4" socket to 10 mm wrench 3/8" socket to 13 mm wrench 1/2" socket to 17 mm wrench Print standing with 15% grid/gyroid infill and no…
Soldering tools holder The tool holder module couples with the attachment plate module, print one of each and you have what you need to hang a holder for Your soldering tools. Print standing with 10% gyroid/grid infill and grid support…
Machinist square holder The square holder is pretty generic and should fit most squares in this size range (otherwise the cad files is included). Print standing on left side with 15% gyroid/grid infill and no support. You can hang it on a…
Make use of old magnets and build a swarf collector. Magnets comes from scrapped microwave owens, and they all seam to have the same size (!?). Print it, and glue the parts together. You need 8 x magnets ⌀57mm (2" 16/64) ~10-12mm ("…
A Gridfinity 1x2 bin sparkplug holder metric for 1-2" drive ratchet The socket holder uses a gridfinity 1x2 bin. Its made for metric spark plug sockets 16 and 22mm. Used with 1/2" drive ratchet. Print standing with 10-20% gyroid/grid…
Vblock holder Vblock size 1-3/8 x 1-½ x 3-1/16" (35x ~38 x ~75mm). Print standing with 10% gyroid/grid infill, and grid support from build plate only. The tool holder module couples with the attachment plate module, print one of each and…
Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…
Flashlight holder The flashlight ⌀ is 26.5mm (1- 1/16"). The flashlight holder module couples with the attachment plate module, print one of each and you have what you need to hang a lathe tool holder. Print “on the back” with 10-20%…
Tool holder insert MT3 (Morse Taper 3) This is a printable insert for 35mm (1-3/8") square mild steel tubing. When it comes to heavy tools, a tool holder made of steel is a great option. I've made this insert so that You can click into…
With this adapter you can charge your laptop or phone using a AEG power tool battery. There is a great video describing the charger here: https://youtu.be/JZ98d8Sx8WQ by Hacktuber Hardware you need for this print: 5x M3 4*5 brass press-in…
These are all currently available results.
