AEG/Ridgid to USB type-C/A adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AEG Pro/Ridgid battery 18V lithium ion adapter to USB type-C/A for laptop/phone charging
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 1
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this adapter you can charge your laptop or phone using a AEG power tool battery.
There is a great video describing the charger here: https://youtu.be/JZ98d8Sx8WQ by Hacktuber
Hardware you need for this print:
5x M3 4*5 brass press-in threaded inserts
4x M3 x 6mm hex socket screws
1x M3 x 16mm hex socket screw
2 x Crimp Terminals Pcs Tyco 6.3mm Automotive Car Splices Wire Terminal 926965-1 Non-Insulated Female Crimp Terminals 3€ for a bag https://www.aliexpress.com/item/1005002121948152.html? Google "automotive car splices wire terminal 926965-1" or the picture at the end to find this part on the Internetz.
1 x red cord 1.0 mm² x 100 mm (~4") length
1 x black cord 1.0 mm² x 100 mm (~4") length
1 x Charger Module DC 6-30V 140W High-Power Charger Module Desktop Smart Fast Charging Module Supports QC 4.0+/5.0, PD, PPS, FCP, SCP, SFCP, AFC From Ali, Amazon or whereever you get your Electronic stuff 10€ (https://www.aliexpress.com/item/1005010274834777.html?)
Printing:
Print AEG plate flat side down and 15% grid infill, organic support everywhere.
Print the rest of the parts flat side down with 50% grid infill, no support.
Putting it together:
Solder on the wires
Route through AEG plate
Crimp on the terminals
Place them like this and screw together
Click on the lid and you're done!
Google this picture to find the crimp terminal
