Counting matching models…
I've splitted the part in two parts (top and bottom) as I wanted to hide the cable on the bottom and it lifted the dock. In addition I've designed a pad for the bottom to be printed in flex filament (Ninjaflex, TPU) so that the dock…
It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor. This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this…
This is a generic card box based on the rugged box by Whity. As the generic cards have different dimensions compared to UNO cards, they did not fit into the UNO box . The box is designed for cards with a dimension of 91mm x 59mm and a…
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
This is a micro SD card holder. Depending on the adapter you need for your PC, you have to select the right bottom part. Here you can find version 2 of the holder. I've redesigned both boxes for easier opening and to fit the new adapters.…
It's finally here. The new FPV-Rover V2.0 This is a remix of the drogerdy designed by timmiclark. http://www.thingiverse.com/thing:700835/#files Upgrade 01: http://www.thingiverse.com/thing:1269962 Upgrade 02:…
This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…
Select the one you like and print it. The icons shopping cart and Christmas tree are on both sides.
This is a mini version of my FPV-Rover V2.0 The dimension are 10cm x 10cm x 3cm Intructions and BOM can be found on Instructables https://www.instructables.com/id/Mini-FPV-Rover/ Videos on Youtube: Print instructions Body: Print body with…
Pause the print and insert the coin. Or be brave and add the coin while printing :-D
My son wanted some trophies for his slot car track. And it had to be clear, that it's for cars. Therefore I've created a trophy (first, second and third place) with a wheel. Height is about 10cm. no support needed Tor this print.
This is a remix of the race truck body by MarkerDave created for the WLToys K989 1/28th scale RC car. I've added some details to the body, closed the holes in the front and made it lighter. Width is 75mm. The body can be mounted perfectly…
This is a replacement chassis for the original one. The original one has a simple pin for the slot and a magnet, so that it doesn't slide. This is a chassis with a slide guide which allows you to drive over obstacles and slide, as there…
This is the Nerf Dart Launcher for the FPV-Rover (V1.0) http://www.thingiverse.com/thing:1240754 And for the FPV-Rover (V2.0) https://www.thingiverse.com/thing:2952852 From the beginning of building the FPV-Rover, I wanted to have a Nerf…
Ever wanted to build your own Slotcar? Take your bricks like Lego or Bluebrixx and start building. all you need are the printed parts, glue, screws and an old car you have to sacrifice for wheels and motor. Follow me on Instagram for…
This is v2 of my microSD card holder. Depending on the adapter you need for your PC, you have to select the right bottom part. As the adapter for USB-C got smaller, the box is smaller as well. For standard USB the box is a little taller…
I love the long nose truck but I also wanted a COE. Andrew gave me a good base to start with. In addition to the regular parts, you need 8x 6mm x 3mm magnets. 4 magnets are placed in the stacks and the middle frame and hold the cab in…
Tesla Cybertruck for WLToys K989 chassis. You'll need 6 screws M2x6mm Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 6x M2 x 6mm Screw: http://bit.ly/3jy205c Go and check out my other bodies for this chassis. Cab…
This is the Snow Plow for the FPV-Rover (V1.0) And for the FPV-Rover (V2.0) Winter is coming. So the FPV Rover needs a Snow Plow to ensure a clean pavement. Intructions and BOM can be found on Instructables…
This is a remix of the awesome Rugged Box from Whity to store the Revo Nozzles. The only things you need are 6 M3 x 30mm screws and 2mm rubber foam sheet, to protect the tip of the nozzles. And of course Revo nozzles .
Front headlight lens for Model 7 Buggy from 3DSets
This is another body for the WLToys K989 chassis. This time it's a Low Rider Delivery Truck. Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 2x M2 x 6mm Screws: http://bit.ly/3jy205c 2x M2 x 10mm Screws…
Why not combine two hobbies, FPV and Slotcar. This ist a 143 scale chassis, but can be used on all tracks. You just have to sacrifice an old car for wheels and motor. Intructions and BOM can be found on Instructables…
This is a remix of Oskar's Cube from TautologicalRecursion. Run the rods from the circle to the square in the maze. The original cube was too big for my taste and the rods do not slide properly in the maze. Therefore I've scaled…
Glue the mirrors to the truck and have fun.
Front headlight lens for Model11 Sandy from 3DSets
This is a remix of the puzzle box by Scorch. The box was designed for a nickel and as it is very hard to find one in Europe, I've remodeled it to fit an Euro. I've redesigned the holes and gaps, as it was a little too wobbly. You need 1x…
This is a remix of the E3DBuggy for the WLToys K989 1/28th scale RC car. With this chassis you'll have a functioning rolling E3DBuggy. The body can be mounted perfectly to the chassis. Print it with 2 perimeter and 15% infill. Have fun…
This is a printable LED lamp with WS2812 LEDs. They can be powered via USB, power supply or with an Arduino. Intructions and BOM can be found on Instructables https://www.instructables.com/id/Printable-LED-Lamp
This is a replacement silicone cover for the original E3D V6 (new version). The original cover does not stay in place. Just print all 3 parts, connect them and mold your cover. Instructions: Print everything with about 20%-25% infill. You…
This is a side grille for Model 6 Rancher from 3DSets . Use 4 Screws M2x8 and screw it into the side panel.
I changed the SemiTruck from N20 to N30 motors. They are slightly longer, but far more powerful at same rpm. I use 6v 400rpm and 500rpm. https://s.click.aliexpress.com/e/_c3oyUdPz Comparing the data sheets with ChatGPT, they should have…
The original exhaust was too long for my taste. Therefore I've created a shorter one.
What do you do with your coins if you have too many and the wallet gets bigger and bigger? Just throw them into the coin collector and store them there. And if you need spare money, open the collector and take whatever you need. Hole…
Remix of the original stacks for the RC SemiTruck from ProfessorBoots
As I had some spare parts from my first FPV Rover, I decided to build a RC car. But it shouldn't be just a standard RC car. Therefore I've designed a trike with a rear steering wheel. Videos: https://youtu.be/wLeIawSgQNw Intructions and…
The original exhaust pipe ist pretty long. So I've designed a shorter one.
This is a remix of my cab over race truck to make a cab forward version. Body is created for the WLToys K989 1/28th scale RC car ( http://bit.ly/3ur6jBr ). The body can be mounted perfectly to the chassis. Print it with 2 perimeter and…
This is a remix of the OpenRC Truggy designed by Steamerzone. http://www.thingiverse.com/thing:378042 The tires are a remix of the small tire by Bastien. http://www.thingiverse.com/thing:626863 It is designed for the FPV-Rover (V1.0) And…
A simple battery tray key with a VW-Logo for Model 7, 8 and 11 from 3DSets.
This is a GoPro-Mount for the FPV-Rover (V1.0) and for the FPV-Rover (V2.0) Print instructions Print every part with 15%-25% infill No support needed. If you want to mount the GoPro without dampener, you'll need 2x M3 nuts 2x M3x12mm…
This is a box for your different Nozzles (0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm). Can be printed without support.
Use this as replacement for the original one. You need 8 Magnets 4mm x 2mm for the battery the battery cover and front cover. And a hot glue gun. Battery cover is easy to remove to change the battery. There are two front covers. One with…
This is a silicone cover for the E3D v6 clone from Banggood ( https://bit.ly/3jfFqsQ ). It might fit for others too, but I did not check that. Instructions: Print everything with about 20%-25% infill. You should print the parts with 0.1mm…
This is a remix of the rubber bands sentry gun designed by tristomietitoredeituit. http://www.thingiverse.com/thing:953753 It is the first upgrade for the FPV-Rover (V1.0) http://www.thingiverse.com/thing:1240754 And for the FPV-Rover…
This is a remix of the E3DBuggy as cookie cutter.
You can hang the E3DBuggy separately or glued together on your Christmas tree
This is a nightlight for our son. Print all parts once and use support where needed (moon, base plate, lid). Use natural/transparent filament (at least for the moon) . Glue the moon to the base plate. The lid can be screwed to the base…
A simple wall mount for the FT Mini Arrow
These are all currently available results.
