Counting matching models…
This easy-to-print model is for a silhouette of a Peering Cat with 3 different models for various display techniques that requires no print supports. The Silhouette can be placed on a shelf, placed in a window, screwed to the top of a…
USB cables are very loose going into the Sonic Pad. This allows the USB connector to move around. When this happens on mine, it looses communications from my Sonic Pad to my CR6-SE printer. When this occurs, most of the time, I have to…
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
These models are for a chicken waterer for standard-mouth (some refer as small-mouth) and wide-mouth canning jars (pint, quart, 1/2 gallon). These could also be used for other small pets. These work best when raising chicks during their…
I remixed DuckeyPrinted's bookmark replacing the Mickey topper with my Cat Silhouettes. I created 2 bookmarks. The first bookmark is an Angry Cat with Paws and the second is a Kitten with Paws. These are a quick and simple print. I…
My grandson's enjoy playing with their Duplo train. They did get bored with the limited track set that came with the train. I designed and printed several different track options that expand their set to further their enjoyment and…
These models are for the Duplo Train Track curved and straight sections that are completely Duplo brick compatible. I printed with 0.2mm layer height, 15% infill, and 3 wall loops however these aren't critical. The designs do require…
"BerninaFeet.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 2 large and 2 small sewing machine feet. "BerninaFeet2.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 5 small sewing machine feet. My wife…
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
Those who have plastic T-style door catches on their RV have more than likely broken the arm at least once. I purchased and replaced my RV's main door catch and proceeded to break the arm on the next trip out. I designed the arms to be…
This model is for an electrical box to hold a 120V AC electrical outlet. I've also included a model for an outlet cover that fits flush with the outside of the box. I used this in my router table but it could be used for many other…
This easy to print model is a Kitten Silhouette intended to be displayed above a door. I've included 2 models. The first model has cutouts for the whites of the eyes. The second is intended for 2 color printing where it has a sunken area…
These models are for a washer or gasket for a garden hose. I've included 4 models. One is a line card with 12 breakaway or cutaway washers with retention tabs. The second is identical to the first however without the retention tabs. The…
This is a set of models for an adjustable depth gauge intended as a woodshop aide for setting a Table Saw's blade height, a Router's bit height or a Drill Press's plunge depth. That's what I use it for but I'm sure there are other…
The Bosch Router Table comes with 3 different sizes of insert rings for their router table. The tabs on these Bosch rings break off easily and the height of the rings aren't level with the top of the table. I designed my rings to offer…
This model is for a wall clock with an approximate size of 210mm x 210mm (8.25" x 8.25"). It is intended to be a 2-color print. The NumberClock_rec.stl file has recessed numbers and requires the use of an MMU or AMS for a 2-color print…
This is a humorous “Do Not Disturb, I'm Sewing” door hanger with a 2.3" (60 mm) opening for the door knob. This is an easy to print model that doesn't use supports to print. None of the print parameters are critical. It's recommended to…
This model is for a Shellfish gauge specifically used for fishing California, Oregon or Washington Dungeness Crab, Red Rock Crab or Clams. The model prints without supports. I recommend a 0.2mm layer height with a 0.42mm line width. I…
This model is for a 4-inch to dual 2.5-inch dust collector hose adapter. Dust collector hoses slide over the ends of the adapter and require hose clamps to secure. I used this for my router table. One 2.5" hose went to the fence near the…
This Max Air Flow desiccant holder has an easy twist lock cap and fill funnel. I found the twist lock cap much easier to close than the threaded screw type. This desiccant holder is intended to go into the spool center hole before…
This easy-to-print model is for a silhouette of a cat that balances on a shelf with it's paw reaching down below the shelf. You can hang objects on the paw and the cat will stay balanced in place. You may want to use a high infill…
This badge holder is designed to hold a 54mm (2.12") by 85mm (3.36") Identification badge that is approximately 0.8 mm (0.3") thick. The holder is notched such that the badge is easy to remove which makes it beneficial when needing to…
This model is for a Brio compatible as well as Duplo compatible train car. It's based on a 6x2 Duplo brick and has magnets on each end to mate with existing Brio cars. Each car requires the following printed parts: 1 Body, 4 wheels, and 2…
This model is for a refrigerator magnet intended to be printed in 2 colors. I've included 2 models; one for an 8mm diameter round magnet and the other for a 10mm diameter round magnet. You can scale the design (X & Y) in the slicer for…
This model is for a open-back outlet box or mounting bracket designed for low-voltage devices in an existing wall such as Ethernet, TV, audio or telephone. This box should not be used for 120 volt or 240 volt outlets. This box clamps to…
This model is for a Duplo Compatible 4x4 monster truck. The truck hitch is compatible with Duplo car, truck, and trailer products. I made the truck body and wheels/rims out of PLA. To keep the axles and trailer hitch strong, I used the…
This model is for a Duplo Train compatible Train Track. This straight track is 2 ½ inches longer or 1 railroad tie longer than the straight track supplied with the original train set. It is completely Duplo brick compatible. Features have…
This model is for a Duplo compatible Train Track curved section that has been extended to provide 45 degrees of curve with the same radius as the original Duplo curved section; the original curve is only 30 degrees. It is completely Duplo…
This model is for a Mickey drawing template that will encourage children about art. It's intended to be used with pencils (black or colored) or pens. This is an easy print with no supports. Try to keep the wall count and fill percentage…
This model is for a Hexagon Brain Teaser Puzzle with Puzzle Board and 14 puzzle pieces. I've included individual files for each of the puzzle pieces. I've also included a photo that associate each puzzle piece to the file number. Feel…
This model is for a Minnie drawing template that will encourage children about art. It's intended to be used with pencils (black or colored) or pens. This is an easy print with no supports. Try to keep the wall count and fill percentage…
These models are for a Multi-Cable Snap-Lock Clamp designed specifically for flat type Romex wire 10-3, 10-2, 12-3, 12-2, 14-3 and 14-2. It can also be used for many other types of cables such as Cat-5, coax or telephone. I've included 2…
I'm constantly needing a circle template for rounded corners for my woodworking projects. I've often used paint or coffee cans or other round items as templates. I created these templates to give me a convenient method of drawing circles…
My Grandsons spend hours playing with their Legos making interesting and creative things. They are always looking for unique Lego pieces. These heart shaped Lego compatible parts expands their creativity and gives them a start for making…
Sometimes you just need a very short section of track so I developed this model for a Duplo-compatible short straight section Train Track. It is completely Duplo brick compatible. Variations in track lengths increases your child's…
These models are for Duplo compatible Train Track short straight stubs. These come in handy when the track you created doesn't properly line up or you want extra support using Duplo's for an elevated track. They are completely Duplo brick…
This model is for a Collapsible Heart Basket. My grandchildren use this basket for berry picking. The basket prints using a single stl with a separate stl for the handle. For the basket, I printed in PLA using a 0.2mm layer height and a…
My daughter is a big Harry Potter fan and has a collection of their book and movie themed items. I designed these Hogwarts Express 9 ¾ Train Station Clock models in 2 different sizes for her as a Christmas present. The larger clock fills…
We replaced our bedroom blinds with Home Depot's Home Decorations Cordless Blinds. Our previous blinds had pull handles that kept dirt and oil from our hands off the blinds. The new blinds did not come with pull handles. This simple…
The cable clips that hold the Hot End wire harness to the Bowden Tube on my Creality CR6SE are constantly slipping down to the Extruder. I developed these as a replacement such that they stay in place and don't slip. I used 3 of these…
This model is for a child's coin bank. Coins are dropped in the slot on top. The nut screws off to expose an access hole to remove the coins. The 80mm wrench fits the bolt and nut and is fun for the kids but not required or recommended…
This model is for a Mason Bee Box. Additional reeds or tubes are required to complete and available at a hardware store or Amazon. I've included 3 different sizes of the Hive or Box for 4, 5 or 6 inch reeds or tubes. Pictured is the…
The following models are for an Easter Egg that stands approximately 4.1" (105 mm) tall that will accommodate an optional 1.4" diameter LED Tea Light. The Egg can also be used for home decor other than during Easter. These models print…
I purchased 6 automatic filling Chicken Water Cups from Amazon. They worked great until a chicken bumped or jumped up onto one of them. This caused them to easily break. The original had a ¼" screw-in plastic mount that wasn't strong…
ATMOS Chill'n Smiley Face printed in 3 colors
This model is for a replacement hitch to interconnect train cars with the Playskool Train set. This is a simple quick 1-color print that doesn't require supports. I recommend printing with 5 wall loops to maintain strength at a 0.2mm…
These are all currently available results.
