Counting matching models…
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any…
I wanted something simple, rugged and compact to EDC one pill of Ibuprofen, without its packaging being damaged by other tools I'm carrying in the same pocket. It was my first attempt at designing something with a thread in FreeCAD and it…
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
Just a really simple print I like to run with new filament. Takes about 15 minutes and I simply use a sharpie to label them.
Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…
I was in need of one and wanted to save a trip to the hardware store. Prints without supports and screws together nicely. I didn't put any holes, just used a drill where necessary. Just be careful with PLA since it's quite brittle and…
This exists because my SO asked me to print a bookmark for her. The drawing I received from her looked like this. I'm especially grateful for the precise measurements she provided. I'm sorry.
A simple but elegant stand for the 8BitDo Pro 2 controller. Likely also fits similarly shaped 8BitDo controllers. Due to feedback there is now two versions, depending on how well your printer can handle 45° overhangs. In general neither…
Simple design but works really well for me. I intentionally kept the pen trays small to prevent myself from putting useless crap into them. Printed in a bright color it looks pretty fantastic. Paper tray is 90x90mm. Due to feedback I…
Legal disclaimer : “LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this site” The models listed are custom made in order to be compatible and NOT an official product by LEGO® in any way.…
Transform GraviTrax Junior with this compatible 3D-printed corner piece! Take marbles on a thrilling ride with twists and turns. Also contains a hole so you can add your favorite accessories. Will need some support and a little bit of…
I really enjoy these simple, no fuzz drawer-style knife holders since they keep things nicely organized and out of the way. The only drawback I found with existing designs is how difficult it was finding one which exactly fit the size of…
Designed this for a friend, not much to say about it. Adjust the size to your liking and hit print. The sharp tips might need a (partial) brim or mouse ears depending on how good your bed adhesion is.
This Gridfinity container holds 9x A23S batteries. It does not have screw holes but I kept the regular magnet holes.
I needed a notched spatula for distributing some glue across a large surface. Since I just came back from the hardware store and was in no mood for another trip, I quickly checked Prusaprinters.org for a potential replacement. There was…
Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.
Elevate your GraviTrax Junior vibes with this compatible 3D-printed straight! Will require supports and some minor cleanup work. Disclaimer: Only works with GraviTrax Junior!
My own spin on a child proofing cover for type F outlets. Allows for easy one-handed removal just by using the power plug itself. Requires less than 10g of filament per piece. I found it to be the easiest if the holes are facing up. Might…
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
My favorite outdoor pants were missing a button and there was no spare button to be found. Finally another reason for justifying the purchase of a 3D-printer! Doing a couple of strokes with sandpaper gives it a nice surface finish.
I stumbled upon the great model by LK74 but wasn't entirely happy with some of the design decisions. I ended up redesigning the entire thing from scratch, while keeping a lot of the measurements of the original design. Especially the…
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
Replacement baseplate for Ikea hinge 109337 The part itself has the part No. 109221 I used it on a Kallax door insert. On top of the printed part you're gonna need: 1x M4x10 1x M4 nut Some M4 woodscrews and maybe some washers I used a…
A handy solution for your rulers. It's not fancy, just practical. Holds up to four rulers, max size 37.5cm*2.5mm. Be aware that it won't fit on your regular sized (MK3/MK4) print beds. I have included a pre-cut version with dowels. Needs…
Had one random D-Cell laying around and needed a holder for it. There wasn't any 1x1 holders so I made one. This model only has magnet holes.
Just in case it's not obvious enough: This is not an official product! Have you ever asked yourself why you're doing all this filthy manual work, even though you've spent a small fortune on a Thermomix®? No? Well I certainly have. Sure…
This acts as storage and also as toy, teaching our daughter fine motor skills and sorting things by color. Most of the time she's just sitting there moving the pens around and putting them into different holes, instead of actually drawing…
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
The original lens hood was like 20 bucks, so I made my own. Depending on your printer, you may have to carefully file down the tiny plastic tab a little bit so that it snaps in more easily. Since I couldn't find accurate dimensions of the…
Holder for one EN-EL15 type rechargeable battery. It is designed so the connectors are facing down. I did this to protect them from dust. This model does not have screw holes, I kept the regular magnet holes though.
It is designed to be printed in TPU or flexible filament for easy removal. It may also work with PLA or PETG, although I haven't tested that. The surface won't be perfect, like with a silicone mold, but it can be improved with some…
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
This is not an official product! I didn't like how the Google Home had the tendency of moving around on the coffee machine, scratching it up and potentially falling off, especially if you're listening to bass-heavy music over an extended…
Gridfinity 5x3 Holder, designed to perfectly accommodate your Wolfcraft circle cutter. Contains magnet holes and can be stacked.
The fuse blew on one of my powercubes and getting the fuse cover off in one piece was nearly impossible. Quickly whipped up a replacement one. I recommend printing this in ABS.
These are all currently available results.
