Smartphone holder for bigger phones
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.76 – €5.82 net (excluding VAT)
For file: Smartphone_stand_0.2mm_PLA_MK3S_5h41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.29 excluding VAT (range midpoint).
- Weight reported by the author
- 58 g
- Print time reported by the author
- 5.69 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Meant for big phones or if you have a chunky case on it. Has a cable tunnel/cutout for charging and prints w/o supports.
- Rating
- 4.87 / 5
- Likes
- 198
- Downloads
- 2,640
- Makes
- 23
- Views
- 7,463
- Reviews
- 23
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any supports needed.
The cable tunnel and cutout gives you the option to threat a cable through and charge the phone while it's on the stand. Dimensions of the cable tunnel side to side are 13mm, with a radius of 3.5mm. I tried a few cables and even the OnePlus cable which is more on the thicker side, fit through with no issues. Just make sure it's decently flexible to comfortably make the bend for plugging it in.
It doesn't require any supports while printing, just make sure to print it on its side.
Also, check out this model by xand3r, if you wanna somewhat permanently attach a USB-C cable to it!