Smartphone holder for bigger phones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meant for big phones or if you have a chunky case on it. Has a cable tunnel/cutout for charging and prints w/o supports.
- Ocena
- 4,87 / 5
- Polubienia
- 198
- Pobrania
- 2630
- Wydruki
- 23
- Wyświetlenia
- 7436
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any supports needed.
The cable tunnel and cutout gives you the option to threat a cable through and charge the phone while it's on the stand. Dimensions of the cable tunnel side to side are 13mm, with a radius of 3.5mm. I tried a few cables and even the OnePlus cable which is more on the thicker side, fit through with no issues. Just make sure it's decently flexible to comfortably make the bend for plugging it in.
It doesn't require any supports while printing, just make sure to print it on its side.
Also, check out this model by xand3r, if you wanna somewhat permanently attach a USB-C cable to it!