Counting matching models…
Drawer style fixture for Mac Mini This bracket serves as a way to fix the Mac Mini on the underside of the desk. All cables can be plugged in before sliding the device into position like a tray or drawer. Tested with Mac Mini M1, if using…
Kitchen Paper Roll Holder Simple two part design of a kitchen roll holder. Print fixture and body twice and screw fixture to underside of table or cupboard. Tips for printing: Print from PETG or PLA, make sure to slightly sand the 45…
A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.
MT2 / MK2 Stand for Mini Lathe This item helps to organise MT2 / MK2 tools, chucks and centers near your mini lathe. It can hold up to 12 tools, 3 allen keys and two chuck keys. Fits on top of the control box of a Technika lathe but can…
MT2 Stand for Morse Taper 2 Tools This stand allows you to store four MT2 tools on your bench or next to the machine. Use PLA or PETG for printing this one.
Brackets for Bosch Track Saw Guide Two part print to attach Bosch track saw rails on cabinets and other surfaces. This works well in a vertical orientation and on some kind of smooth surface. I used it for the short guide rail and I can…
SciP Utility Cutter Knife Simple handle design for 18mm cutter knife blades. What you need: DIN 464 M3 x 4 mm thumb screw or similar DIN 9021 3,2 id washer or similar CNC Kitchen M3 x 3,0 heat set insert Print from PETG or PC filament.…
Organiser Box 108 x 162 x 63 for Auer Europlus System This organiser box fits the Auer Europlus System and potentially other systems as well and allows for labelling. The dimensions are W 108 mm x D 162 mm x H 63 mm. Print using any…
Machine Light Shade for Ikea Tertial This shade fits the Ikea Tertial lamp and lets you use it as a machine/workshop light. It is smaller than the standard shade and therefore doesn't block the view when using the lamp in close proximity…
T-handle Hex and Torx Stands for Aldi WorkZone Workbench stands for the very common Aldi WorkZone hex and torx t-handle drivers, but fits other manufacturers as well. These are definitely not the best tools but workable and might as well…
Horizontal Storage for DIN2080 SK30 Tools This item lets you store SK30 DIN2080 tool holders horizontally in drawers. It fits the Hoffmann GridLine rubber drawer liner to prevent it from shifting. Printing recommendations: PLA, enforce…
Bench Fixture for Tanos Systainers This bracket lets you fix drawer-style Tanos Systainers to the underside of your work bench. Use Polycarbonate or PETG to print this part. ATTENTION untested, will update with images soon. If you print…
Argon Bottle Transport Brackets This is a simple bracket to help secure 10l argon bottles during transport. ATTENTION, VERY IMPORTANT: Use at your own risk. This model DOES NOT SECURE YOUR GAS BOTTLES for transport in any way! YOU are…
Dual Cable Zip Tie Bracket 8 mm This bracket lets you bundle and attach two cables of 8 mm diameter each to a surface. There is a bridge integrated for a zip tie and the zip tie stays exposed to it can be removed and replaced. Use 3M VHB…
This bracket lets you bundle and attach two cables of each 10 mm diameter to a surface. There is a bridge integrated for a zip tie and the zip tie stays exposed to it can be removed and replaced. Use 3M VHB double sided tape to attach…
Magnetic Spray Bottle Holder This is a cup with integrated magnets to store spray bottles or markers on metal surfaces, such as machine cabinets, etc.. I used 3 x 10 mm magnetic discs. I can recommend using PLA to print this one.
Bench Corners for Sacrificial Tops These corner brackets let you add a sacrificial 12 mm MDF top layer to your desk or bench and keeps it from sliding off the bench. Its suitable for 22mm thick desktops (such as some IKEA desks).…
T-Slot Covers for Wabeco D6000 10mm These covers help you keep the t-slots of your machine clean and free of chips. The covers fit 10mm slots (nominal) but are slightly wider to fill a total of 11mm width. Adjust the length of the cover…
Strain Relief for Amphenol ACPR-BLK Plug This is a strain relief sleeve for use in Amphenol RCA plugs. It enables use of thin cables, such as coax cable (ie. RG-179) Print from PC or industrial PLA using 0.15mm layer height.
Push Button Housing for Sheet Metal Edges This is a housing for keeping push buttons handy on the edge of sheet metal housings and guards. It has a 16mm through hole for stainless steel push buttons and the housing fits a 1.8mm thick…
Top Cover for Raspberry Pi Zero This simple top cover protects your Raspberry Pi zero from mechanical exposure or from accidental contact with conductive materials. It exposes the GPIOs as well as ports. Use standoffs underneath the Pi to…
Precision Guide for Holzkraft HBS351 Bandsaw This is a guide add-on for the Holzkraft HBS351 Bandsaw to cut thin strips and fine workpieces. It attaches to a 42 mm wide main guide of the saw and lowers down to 3 mm above the saw table.…
Cable Spool Rack This bracket lets you attach a 20 mm diameter aluminum tube to the edge of a shelf to store spools of wire and hand tools. Use o-rings to secure tube from sliding sideways. I can recommend PETG for this print.
Filament Spool Holder for PowerFix Racks This bracket enables you to mount a variety of different spool sizes above your printer in a "PowerFix" (Lidl) rack. This way, you can place two Mk4 printers on one shelf (900mm wide rack) while…
These are all currently available results.
