Counting matching models…
I tried a few bowls, and decided to design my own. This one needs no supports. I printed this model in the pictures with PLA Linden (Prusament wood PLA) and the "fuzzy-skin" effect My print settings (bowl from image): Layer height: 0.20…
Prusa XL & soft TPU With soft to very soft TPU filament, the resistance in the PTFE tubes is too high and cannot be printed even if the filament sensor being deactivated. I created a bypass with ball bearing rollers for this purpose. I…
This is a well designed watering helper for plants. It comes with different watering pipes, to adust for you're plant. the pipes have different diameters (from 0,4 mm to 1,4 mm) the pipes are screwed to the cap and water tight no support…
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
I bought the stepdown USB modul on ebay. Search for “ stepdown USB modul ” an compare the images. I updated the part, the new board size is 19,2mm x 38,5mm Need one M3x6 screw. I mounted it on the right PSU, there is a free power port and…
I like to use low-level filtration while printing and want to prevent cooler ambient air from directly hitting the heated bed. I intended to close the two large slots directly in front of the door for this purpose. The goal is not to make…
you can find here the detailed description. this version requires more intervention, but is fully integrated and actively exchanges the moist air with the ambient air. I remixed “ Sunlu S2 base with ventilation ” to have an seperate and…
This is a anti-splinter guard for the BOSCH GST jigsaw. It fits better then the original part. I made some different widths of the slot because the saw blades differs a lot. The original part does not fit so nice like mine and with some…
Prusa XL & soft TPU With soft to very soft TPU filament, the resistance in the PTFE tubes is too high and it cannot be printed reliably and to the correct dimensions despite the filament sensor being deactivated. I built a bypass with…
I have to use dowels for my wall mounting, so I made a bracket with only 3 screws for 4 batteries. What I could find was at least 2 screws per battery. Also, I didn't have much space in terms of width. I set 4 perimters arround the holes,…
The active air flow via fan is installed in the wrong direction of the Sunlu 2. The fan mostly blows the air onto the back wall, and in some devices onto the front wall where the circuit board is installed. As the Sunlu is round, the air…
This flowerpot coaster uses as less filament as possible if you use the default settings. A coaster with a diameter of 180mm needs only 40 grams. My printer does print this model water tight with the default settings. If you want to be…
For 58mm portafilters (E61). Can be used for both 2-cup and single-cup portafilters. After grinding, tap lightly and turn the funnel. Turning counter-clockwise moves the powder more towards the center; turning clockwise moves it more…
If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base. I have on my spare parts from the XL kit only one M3nEs nut over. And who the hell has an M5x85 screw at home? So I did an remix,…
This is the extension for the enclosure of my TPU modification, found here . The bearing parts can also be downloaded there. The bearing parts needs to be printed in 0,10mm profile.
This is a filament spool holder and dry box modification that can be attached to the Prusa XL filament holder. The original is from Ondřej Stříteský , can be found here . This modification of the drybox, has been extended by XL side…
This box is made from ASA and after assembling I smoothed it with acetone. For the axis I used a 2mm brass tube instead of 2mm screws. 2x 2mm axles needed, 30mm width (screws or tube). 2x 2mm axles needed, 15mm width (screws or tube). The…
I'm a new owner of the prusa buddy3d cam, seems to me like the ugliest printer camera on planet. So after having some trouble to get it running, because my wifi password was too long for this peace of hardware, I did not found a nice…
I did not like the knob design for the flat xLCD cover . Most other knobs are to big and to short or does not nicly fits to the flat design.
I decided to print this part in TPU because presumably, significant forces will act on the long, thin tube. The vacuum cleaner hose is also ribbed and often gets caught on the edge of the saw table, which also exerts forces on this part.…
I did not use CAD for this model. I used the absolutly “customizable rugged box” and the Prusa Slicer, to to cut the “wiessmann” bit holder in pieces, placing it in the box and merge it to a new model. Great tools if you know hot to use…
The middle part for prusament spools.
These are all currently available results.
