Counting matching models…
Stylish plant labels for your garden, herb planters and more! Two slightly different models based on the same theme Hopefully tasteful (not too plain nor too kitsch ) Text on the front and back (I suggest putting the genus on the front…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
A smaller version of the Simple Filament Swatch by Jens Willmer. I found the original a bit too big for me as I'm trying to keep my workbench as compact as possible. Smaller swatches are also quicker to print and use less filament. Works…
A stackable, washable, anti-spill and customizable coaster for beverages of all kinds. I wanted a large (but not too thick) and modern-looking coaster for my home office and general use and did not find a model that I liked and checked…
A modern-looking wall-mounted toilet paper holder that doesn't cost a fortune. Inspired by an IKEA model (which I must concede is not that pricey compared to alternatives), but with more refined curves and chamfers. Fits large rolls such…
A nice set of two modern-looking hexagonal bookends to fit your hexagonal life! Perfect to store some books beside your Prusa printer ;) Simple, parametric design Two variants to fit your shelves, mix-and-match as you like Can double as a…
A versatile and compact printing tools organizer that's printable on the Prusa MINI (180mm wide). I designed it to fit as many things in as little space as possible, while keeping all tools accessible and upright. Slanted top makes it…
Looking for a solution to get better sound on my Meta Quest (previously known as Oculus Quest), I stumbled upon this design by budgiesarecool . I already had some Koss Porta Pros so I printed it and used that for a couple of weeks (after…
A simple MOLLE attachment to hang your sunglasses on your backpack shoulder straps. The hole should be big enough for most sunglasses, if not the parametric design is included so you can tweak it to your needs. Print in PETG for maximum…
Exact replica of the original Rummy stand legs from the old set we have. Very closely matches the size of the original. May be useful to fix your own! Enjoy. Note: In the photos, the brown one is the original and the black one is the…
This is a simple temporary support to help install the primary mirror on your Hadley telescope. Can also be a nice stand to install the cell on the mirror and let it cure (~24 hours) before further handling. Very specific, but it was…
A simple and elegant temporary camera cover for your MacBook. Tested to fit on the 2020 MacBook Pro. Does not fit on the newer Apple Silicon MacBook Pros. Print it in black for stealthiness or with bright colors for a constant reminder…
A simple, modern-looking parametric hook. It has a small inner lip to help prevent towels and rags from falling off. It looks especially clean when printed in white which hides layer lines pretty well. I'm personally using the anchored…
A box that fits most standard-size keys and that can be magnetically attached to something. Parametric Fusion 360 archive included. The use case is hiding a spare key outside your house in case you ever end up without your keys or if you…
A small pot with separations to help regrow green onion and other small vegetables or plants without them falling over. There's a small grid plate on the bottom to make room for new roots. Fill to cover existing roots with water. This is…
Same thing as the original by Brolin Workshop , but with smaller screw holes. Fits M3 screws and washers. Works great with these t-nuts which accept M3 nuts. Included is the somewhat cleaned-up STL in Fusion 360 format if you need to…
A long hook for IKEA SKADIS, based on a metal hook that IKEA sells in small packs. Much cheaper if you don't need as much rigidity. That's it!
Use this to attach two things to your telescope, such as a red dot finder and a finder scope, as pictured. Marked as a remix to link to the main project. Features Two dovetail slots hold your accessories steady side-by-side Uses the same…
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
A sturdy spacer to move your Fanatec ClubSport Handbrake V 1.5 farther out from your shifter or other mounting point. There is zero wobble due to the large contact surface. Change Z height to the dimensions you want. By default, the part…
This is a remix of the EDC Bit Driver V2 by @Cheesus (thanks for sharing!) I loved the concept but I rebuilt it from scratch to fix a couple of small gripes I had with it. It's still strongly inspired by the original. Overall, it's a bit…
Nice beehive-inspired vases designed for small floral arrangements. Perfect on your kitchen table, counter, in the living room or anywhere else you like. Even better with fresh cut flowers from your garden. This project is my wife's…
It's a toy screwdriver! Not much else to say :) Printing Instructions Print the model standing up Optionally, use the provided 3mf file which has color changes configured at the appropriate heights
I wanted a cable clip that can fit in small spaces and that can be as small or as big as I need for a specific use case. Enter the Compact Cable Clip (Parametric) ™ ! Features Tweak parameters in Fusion 360 to get the exact clip size you…
I wanted a way to keep some duct tape and paracord handy while not taking too much space in my EDC backpack. The Flat Duct Tape and Paracord Roll™ is born! Contains ~ 2 to 3 meters of paracord (if you wrap it tightly). Fits multiple…
A hooks to hang things on MOLLE. One possible use is hanging a hydration bladder. The parametric design is included if you need to modify it for your needs. Print in PETG for temperature and mechanical resistance.
Convenient and accessible storage for eyepieces, filters, phone and more. Marked as a remix to link to the Hadley project. Could also be installed on any other wooden telescope mount with a surface wider or equal to 165.5mm. Visible in…
Cable clips to tame your HMD's cable mess. Fits on the Elite Strap (with or without battery). Useful for Oculus Link, battery packs, headphones, etc. Inspired by https://www.thingiverse.com/thing:4639044 but remodelled to tweak dimensions…
We keep our old iPad around for the kids, which means we have two iPads to juggle with and charge. I made this double vertical stand so that we could store them and charge them easily without taking much space. Printing Instructions If…
Just a cookie cutter based on a simple drawing my daughter made. Pro parenting tip: We used it to cut toast for a quick and easy Easter breakfast :) Prints in approximately 38 minutes at 0.2mm layer height on a Prusa MINI+. Dimensions:…
A simple base for the awesome Spiral Vase Mode Sierpinski Pyramid . Makes the bottom of the pyramid more opaque, enhancing the effect when you pick it up and inspect it. Otherwise the bottom is quite translucent (and somewhat fragile)…
A pillbox mod for the АПТЕЧКА model by Jakub Kočí , inspired by @Si1verEag1e 's mod, but with more space for larger pills and no day markings so it can be used for other things without feeling like a pillbox.
Adds downward pressure on the bearings to ensure the telescope doesn't rotate under its own weight. Depending on the telescope's balance and the stuff you attach on it, you might find this necessary when viewing objects at high-ish…
We like to keep our bird's cage open and keeping the door open horizontally makes for a good perch and "landing platform". Customization Instructions A parametric Fusion 360 archive is included if you need to tweak the dimensions before…
Replacement miniature gears for the Litehawk STORM Drone. I made this gear to fix my toy drone but almost as much to test how small I could print a working mechanical part. Turns out you can print some incredibly small stuff with…
I needed replacement Grado headphones rod blocks and found a model by Extra Fox that was perfect for my needs, apart from some cosmetics. One thing I really like is that there is no chance the strap will come off again due to it being…
See the original model for details. I printed mine @ 50% because I needed a smaller scoop.
A simple, easily customizable plant pot (or rectangular storage apparatus). The default size is made to fit IKEA BEKVÄM “spice rack”, but you can print it to your exact specifications by modifying the included Fusion 360 source file.…
A small-ish case for the acupuncture needle that comes with the Prusa printers. After using the needle for the first time to fix a clog on my printer, I proceeded to sting myself with it when trying to put it back in the small plastic…
When the time comes to install your primary mirror on the Hadley LTA, there are multiple options. Here's how I assembled mine: This is a section view of the primary mirror in its cell (left) and the LTA (top and right), with the rear of…
When removing an old, rusted license plate from a Nissan Versa 2008, I had to break the (already half-destroyed) clips that were supposed to hold the rear bolts in place but didn't. This replacement clip should be much tougher and will…
I made this as an educative toy for my children for a camping vacation on the beautiful Île aux Lièvres on the St-Lawrence river, Quebec, Canada. The goal was to facilitate exploring the riverside and its treasures while taking as little…
A simple parametric cylindrical container with some ribbing for rigidity and grip. Doesn't use too much filament for the size due to thin walls. Customization Instructions Change inner_diameter to alter the inner size of the container and…
This adapter allows you to use cheap AliExpress / Temu aluminum replica shifter knobs with a Fanatec ClubSport SQ V 1.5 Shifter. I made this model to fix a specific issue I had with similar models I found on Printables and elsewhere: the…
This seemed to be a perfectly fine mod but after printing it I noticed that it is too short / too far from the metal paddle arms to get a good magnetic pull, at least with the magnets I have. I remodelled the part from scratch in Fusion…
When there are no holes on the bike for mounting a bottle. See original by @Castulus_1022822 for details.
A magnetic knitting pattern holder with an angled body to avoid the thickness of the bar and/or projected shadows from hindering readability. Tolerances have been designed so that when printing the parts flat the bridges do not prevent…
The top rack plastic wheel pegs recently started snapping off on our Maytag dishwasher. This is a small part to fix this issue. Make sure to follow the printing instructions! Printing Instructions The easiest solution is to use the…
Same as the original model by @Startrekfan2 but I filled the gap between pins so that it's much less likely to snap under the pressure of the rack and the dishwasher's heat. Configured to print on its side for maximum sturdiness. Use the…
Print in the provided orientation and optionally transfer a rubber ring from the fan to the mount before installation. Use the original screws (those that hold the rubber rings in place) to attach the mount to the fan.
I originally designed this to put in our bird's cage as an additional source of healthy food. However it's a nice compact design that can also be used for other purposes; place or hang it anywhere and get regular healthy sprouts to add to…
Our GE dryer's dial shaft split in two so I over-engineered a small part to fix it! Printing Instructions Prints without supports with the small end on the build plate I printed mine with 0.2mm layer height PLA is fine Installation…
Problem My 15-year old Grado headphones (!) have started to develop some slack in the headband-to-cup assembly. Specifically the hidden o-rings through which the metal rod slides inside the side blocks get stretched and/or a bit oily with…
A space-saving way to keep your 1Zpresso brush handy Also pictured: Portafilter Coffee Scraper Cleaner Wall Mount DeLonghi Dedica Cleaning Needle Wall Mount
You may ask: why not print a non-retractable WDT with an included stand instead? And that would be a good question. The answer is I printed the RetractaWDT first and while I like it quite a bit it kept falling over as I decided to store…
A compact way to keep your DeLonghi Dedica steam wand cleaning needle handy. Also pictured Portafilter Coffee Scraper Cleaner Wall Mount 1Zpresso Cleaning Brush Wall Mount
A stand for rotary encoders, large push buttons or similar round things that need to be interacted with. I sometimes need to work with rotary encoders and physical push buttons for the kind of software we're developing at work and my desk…
A space-saving way to keep your Portafilter Coffee Scraper Cleaner handy. Also pictured 1Zpresso Cleaning Brush Wall Mount DeLonghi Dedica Cleaning Needle Wall Mount
Simple foot plugs for IKEA DUKTIG that allow adding felt pads to the legs, as the included grey feet are empty on the bottom.
A simple compliant hook latch that auto-locks when closed. Top mount for containers that have a larger top surface than the container's bounds. I suggest printing in PETG for flexibility and so the hook doesn't deform over time.
A nice upgrade from a generic funnel shot collar that's more compact and allows for mess-free transfer of coffee grounds from a manual grinder's catch cup plus mess-free WDT. Customization A pre-exported STL is available for the Delonghi…
These are all currently available results.
