Counting matching models…
Hello guys, this is the case for the new orange pi zero 2, the new one, pay attention that is not suitable with old PI versions. The only things that you have to do is 6 small holes for set the two boards Regards Jon Print Settings…
Hi everybody, only a "multi remix" of fuse holder stackable with the possibility to mount it in a panel, I liked the original projects https://www.thingiverse.com/thing:1787609 and the remix htps://www.thingiverse.com/thing:1927820, I…
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone…
20230110 added Cast iron file and review the stainless steel with 15° 2021227 updated updated R1 stl file optimized for HSS 10x10mm or 12x12mm, more or less :) 20210528 original Hello, this is an angular tool gauge to check if your are a…
Hello, just another enclosure for Sonoff mini used indoor only ,could be used on light inline wire, work in progress i will finish it in December 2022. 20211128_finished, ready to test on print 20220412 the 4 holes on corners are made to…
This case is based to the GM328 "SMD" black board dimension bought on famous chinese site. It is not suitable with the board with standard components, The idea was to print a full case and have the opportunity to use a 9V battery or…
Hello! a friend of mine was throwing in the rubbish a Dremel accessory, but i made an adapter to match the PARKSIDE PFBS 12 B3 tool. This adapter match with DREMEL® (225), (576) and others. This part has been designed to avoid 3D support…
Hello, just a remix of Connector housing Dupont 4Pin made by NerdCorner user (thanks for the great job) https://www.thingiverse.com/thing:5233256 ; i remix it in order to my needs, means in my opinion a little bit strong and easy to…
Hello Gentlemen Starting a project to make a jig for sharpening the lathe tool, this project will be create to use bar steel, few welding point, and no machining work. I think that will take a couple of months to be finished Regards…
Another under desk or wall mount for a Dell Latitude 7400 series laptop. Suitable to avoid cooling fans block the fansm. Some side opening for ports. Small 3 mm screws all. The idea was to stick it only with double-sided gel tape but i…
Hello, This is a remix for Battery spot welder pen made by s3rkan (thanks for that), I kept the idea and a i re-made complete the drawing in order to to fit the components that i have in my garage, the spot welder pen will help me to weld…
Hello, first of all I have to say thanks for the idea to Mr. @Herwig Diessner, I re-make the drawing in order to add 2 wires hole, tipical for power wires red/black (3,5 mm), in addition a added other three cover plug with a single hole…
ATX fron panel fit on an old ATX PSU, nice to have in my lab. The PSU project is one of the many find on internet, personally i followed the @tartaglia project (thanks) and i added some modification. Pay attention that the fan cut is…
Hello, this is a jig to cut the aftermarket silicon column for 3d printer bedplate, since for my K1 max the column height measure is 12 mm and it is not easy to find e buy locally i made the jig to cut properly a 18 mm column that is…
Update_20220512 I made another version REV_A, where you can adjust the measure by small spacers tightened on spider chuck, in this way you can avoid to print all the spider chucks. Pay attention because you have to print the parts and to…
Hello Guys, in attachment you can find AXA type 250-00X for small Dial Test indicator with 8 mm stem for your minilathe. Since i bought toolpost on chinese market place, i hope that the measure can fit also for your AXA toolpost, try to…
Updated 20230816 Hi, In addition to the herebelow, you can find hooks for : PSSA4B2 PTSA12A1, ( you can use it for other devices) PBSA12D4 Original 20231508 Hi, i made a supports for my PAMFW12A1 (old version) to fit on Parkside wall…
Alluminium bed mod in order to distribute better the temperature on artillery x1. You have to replace the original glass bed, try to recover the resistance pad, found a good flat alluminum plate and assembly the parts. On top of it, you…
Hello, if you wnat to sleep during the night this MOD is mandatory! the hamster of my daughter during the night run like a cheetah, so i make a mod to a market standard wheel with 7,5 mm hole. Probably, if you want apply this mod to your…
Hello, my father asked me to make a flip stand for his Parkside planer PEH30D4, i made and i tested it. Everything has been printed in PLA, except the file gomma.stl that is TPU. Pay attention that i tested it only such Parkside specific…
Hello, thanks to idea of Mr. by DevonRogers https://www.thingiverse.com/thing:5955359 , i remix it in order to fit to my stone and added a Neodimio magnetic disks 8x2 mm. Add bicomponent glue to fix it. Additional version called V2 is…
Hello, I like the job made by Der_Dennis, thank to share it is cool !, i remix and added a M3 nut on arm in order to add a metric screw, in addition you can find a two versions washer to position inside the machine since the hole for the…
Hello, holder/support for 45°-90° common square for Parkside wall panel, if you want to evaluate other support/holder/hook please refer to this link https://www.thingiverse.com/thing:6171027 Regards Jonweb Print Settings Printer Brand:…
Hi, I prefer to have a blue M4 thread alluminium wheels to squeeze the silicon columns, the printed version with the M4 insert, therefore I bought the cheap kit on on-line web store, where there were no: 4 columns to cut at 12 mm, no.: 4…
Hello, drill bit holder for parkside wall panel. if you want to look other holde please visit https://www.thingiverse.com/thing:6266670 The holder is suitable for conical drill bit 4-32 mm with 10 mm shaft, 4-20 with 8mm shaft and 4-12…
Hello, I was tired of continuing to tighten the endstop x screw, the only screw allows its rotation, considering that the extruder hits the ensdstop during home, so I created a support to lock the enstop X. M3 screws more long than the…
Hello, just another enclosure for Sonoff BASIC used indoor only- NO.: 4 M3x12 Screws, NO.: 4 M3 insert RUTHEX, No.:4 3 mm wood screws to lock the wire Jonweb 20250819 added clamps as suggested! Print Settings Printer Brand: Artillery…
Hello, here below an aftermarket spare parts HINGE for the rear panel of Ford Ecosport, small screw needed. jonweb Print Settings Printer: artillerty x1 Rafts: No Supports: No Resolution: 0,4 Infill: 60% Filament: Sunlu PETG GREEN FLUO…
Hello, another NEMA 23 Cover suitable for GX 12 connector, please use M3x30 button hexagon socket Regards Jonweb Print Settings Printer: Artillery x1 Rafts: No Supports: No Resolution: 0,2 Infill: 50% Filament: Geetech PLA Grey Category:…
Hello, the AIM of this holder was to to fit an Parkside grinder PFBS 12 B3 (battery version) on my AXA 250-000 toolpost, i tested also on Parkside 160 B2 (electrical power version). During the devolping phase i created also an adapter in…
updated 20221028 I added some configuration based on differrent tickness of shelf, personally I prefer the version without 90°, but i kept it for download (28-90°). The name of files are related to shelf tickness. Regards jonweb Hello I…
Hi, another vertical shelf stand for 7590 Fritz!Box, made in 3 parts, just in case you have a lot of cabling i suggest to use also the front cover. Vertical stand since the hot season is arriving and this the device seems an heating…
Update 20260322 add version with hole for standard round switch 18, 3mm inner holes and with collar of 23 mm in combo with usb holder, i enlarge also the clearance, means that it fit well now, 20250707 As per subject, my need was an USB…
Hello This is a USB-C stand for a Dell USB-C docking station with a Dell Latitude 5450 laptop. I made another version for Latitude 7400, specified on file name. I cannot assure that this design fit with other Dell laptop. The stand avoid…
Hi I bought a chinese cheap Din2 car audio for my old lady, my need was a radio frame, i believe that this design can fit to others carplayer 7 inch with the same chassis, please have a look of pictures whre this is the side of the…
Hello, very long project...:) the parts published are already printed an tested. I decided to apply a ELS Electronic Lead screw to my LESTO SCINTILLA lathe, due to the fact I don't have the complete set of gears. Since such gears is very…
Hey, Rail holder for my Air gun GAMO AF 10, my old lady, more than 30 years. I printed and tested it, the only things that at the moment still pending to test is the botton Stanag rail, i found some measures on web , it should be…
Hello, i was tired to change battery in my previous foam maker, i decided to dismount it, use the former motor and i add a 18650 lithium battery, one small microswitch and a 1 cell usb lithium charger TP4056. The holder is able to host…
Hello Vise Soft Jaw Pads Covers for my vise, jaw lenght 120mm, printed in TPU Two version, one with two 8 mm cube neodymium magnet and the second with 3 8x1 mm cylinder neodymium magnet Regards Jonweb Print Settings Printer Brand:…
Hello, very easy to print such vertilcal stand for latitude 7400. Regards Jonweb Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Resolution:** 0.24 Infill: 40% **Filament:** Aceaddity PLA grey Category: Other
Hello Clamps adapter for Parkside PSS 1 D2. Thanks to JimmyFLASH_CZE ( https://www.thingiverse.com/thing:6123639 ) to give me the idea, I made a new clamps holders design splitted in to halfs, useful to assembly the Werckmann Clamps,…
Updated 20230816 Hi, In addition to the herebelow, you can find hooks for : PSSA4B2 PTSA12A1, ( you can use it for other devices) PBSA12D4 Original 20231508 Hi, i made a supports for my PAMFW12A1 (old version) to fit on Parkside wall…
Project Name: “GRANCHIO” – Version V1 updated 20260501 add V1 files main differences: add locking support rear and front, means new base with slots, add locking support for central support, please have a look of red dots on new picture V1…
Hello Gentlemen, this is an addon for your caliper in order to trasform the orginal one to a T-Caliper to use to measure deep holes,steps, others. I adapted it to my caliper MIB Germany 200 mm, but it is very to adptive modfing the…
Hello, The idea is to drive by sonoff TH16 an reptilarium resistor, positioned on base of SAMLA Ikea box to dry the filament, it is a project that i see on internet an i tried to reproduce it. See my design here…
Hello, just a rim hub bearing cover made for COSMIC MAVIC rims made for my friend road bicycle Regards Jonweb Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,2 Infill: 60%…
Hi, stand to assembly under your desk by small screw for wood, suitable for iPad Pro 12.9 inch (5a generation) and iPad Pro 13 inch M4. Regards Jonweb Print Settings Rafts: No Supports: Yes **Resolution:** 0.20 Infill: 60% **Filament:**…
Hi, Another threading die center tool to help us in cutting straight threads, thanks to the user Mr. Taeho98 fot the idea I decided to remake completely the project to fit to my thread tools kit , it is a chinese tools bought at Lidl, the…
Hello, in attachment you can find a carriage end stop for LESTO mini lathe. Don't forget to put the M6 nut during printing on Carriage end stop long.stl. The small screw is a M3 and the big one is M8. Regards Jonweb Print Settings…
Dear all easy beekeeper wall logo Jonweb Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: 0.16 Infill: 15 Filament: Aceaddity PLA + black Category: Art
Hello, just another easy holder to cut thread rods or screws locked on vise without damaging the thread Best Regards Jonweb Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Resolution:** 0.20 Infill: 70%…
Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project,…
Hello Hook for painting or general purpose. This hook has beeen manufactured to add double sided tape and a small nail 1,5x12mm. The hook disk surface is 35 mm in order to grant a good adhesion between the wall surface and the hook.…
Hi, my need was to have a FRITZ!Powerline 540E in my garage and in order to avoid humidity problem and also to keep it hide from thief i made a base in order to assembly the board of 540E.With this box i lose the possibility to use RJ45…
Hello Vacum adapter pipes to connect vacumcleaner system with pipes diameter of 34,5 mm to Katsu wood router guard suction system. I added two O-RING seat for ORING type R25- and R27 in order to increase the sealing Regards Jonweb…
Hi another easy tool to push coffe on Kamira filter Jonweb Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Resolution:** 0.24 Infill: 40% Category: Household
Hello, my Marui battery discharger case was broken, i made the new one in PETG, we can use also ad a resistor load, inside there is a ceramic resistor 20 W 30ohm , but you can change it as per your needs verifying the necessary space. The…
Dust Cover for Redragon K585 PRO (DITI PRO Version) This is a custom‑made PLA dust cover designed specifically for my Redragon K585 PRO keypad (DITI PRO version with brown switches). Since there are multiple K585 variants on the market, I…
Hello A cover protection fot this usb charger UGREEN Nexode 4 Port GaN Fast Charger, such cover avoid to bend accidentaly the plug pins inside the backpack or travel bag. Regarsd Jonweb Print Settings Printer Brand: Creality Printer: K1…
Updated 20260701 added Baofeng UV-3R folder for PARKSIDE wall added Panel_hook_Insert.STL but have look of such parts also in these link, just in case https://www.thingiverse.com/thing:6266670/files…
Just an addon kitch for your K1 max drawer with a gold skull. Skull painted with gold chromium, tray is the original one made by Onstat, here https://www.thingiverse.com/thing:6591374 , good file! Skull is here,…
These are all currently available results.
