Counting matching models…
Note: this was tested using a 6mm thick bed with a Keenovo 750w heater. With the stock bed/heater you may see less effective results. You can use 1 or 2 sides to help with chamber heating. Uses 5015 24V blower fans. Can be connected to…
This is a recreation of a model I can no longer find. The original K1 rigid bed mount was designed by BootyJones. Once I can locate it publicly I will credit it here. These are solid bed mounts for the K1 / K1C / K1 Max to replace the…
Version 1.2 (alpha) Re-install using M3x18 screws - do not use too long of screws as they can hit the belt or corner blocks. If printing in ABS you MUST use 99.5% shrinkage setting in Orca (or similar) for the filament setting. Printed…
After the print, I drilled out the holes in the mount to 4mm to fit heat set inserts. I also drilled out the holes on the fan mount (on the legs) to 3.5mm. This is an optional step I chose to take.
Remix of Derrick's oldham coupler mount with the manually adjustable Z. This is for anyone not on triple-Z.
Note: this is only compatible with K1 Max printers that have done a gantry swap (like the BootyJones gantry). This will not fit stock printers due to the location of the tensioners on the stock setup. This is a small bracket to hold the…
This small bracket utilizes the mount locations for the Stock K1 Max Solid State Relay cover. I have two models, one for mounting on TOP of the cover and another for mounting directly to the mount location (if you have replaced the stock…
Install BTT SFS 2.0 on your K1 printer! I have this currently installed on a Manta M8P, apparently it can be installed on a stock K1 as well - use this link for reference : Here is an install guide for reference:
Quick fix to the broken wheels on my son's Monster Jam monster trucks - slips around the remaining peg and has a lot of surface contact for the wheel to be glued back on. Works excellent. I noticed there is some variance on the diameter…
This is the PCB enclosure for our Ghozt Lighting BlueGhozt 2.0. Can easily be edited to include holes for cable glands or other wiring methods. Includes optional blanking inserts for the default holes in the enclosure.
I wanted to get my aging turtle some more space to bask for our indoor tank, so designed this frame that should insert into most tank topper frames that have a 24" x 18" opening (this I believe fits 55/70/90 gallon tanks with a 48" x 18"…
Mount a Cartographer onto your Creality CR10 v2! Mounts in the stock location BLTouch installs. Designed to fit around Micro Swiss NG but may fit stock setups as well! If anything would need minor adjustment to the length. Requires…
This is a small potting box (I know, super complex design here) for Ghozt Lighting's V5 LED Sequencer.
A tiny potting box for our Power Injector module!
Small potting box for our Power Cutoff module.
These are all currently available results.
