Counting matching models…
Another Bolt Sizes! Updated to fix hex socket size. More chamfer on the bolt tip, easier to clean up threads Added washer Added sets Clearer file names Feel free to send me a message if you have any special requests. Updates New double…
This is an attempt at an Acme threaded C-Clamp. I do not know how well the overhang of the Acme threads will work. Updates v1 Acme thread printed perfectly at 0.25mm Deleted M12 version v2 is more like a real clamp including swivel pad…
This is very much a work in progress and will change constantly. This is a pair of simple ear muffs that hang on the Quest 2 or 3 Elite Strap to keep the audio a little more private and let you use a lower volume. I ran out of TPU, so the…
Simple threaded box. Category: Containers
I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This actually make great and silent fidgets. :) After a test print, I decided to take the knurling all the way to a point.…
More Bolt Sizes! Feel free to send me a message if you have any special requests. Update Added Set Reset origin on each item Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10…
Everyone really likes my knurled box, and I hate the fact that the outside threads are on the lid instead of the base, so here is a new version. Updated to add more of a bevel to the inside to get rid of the overhang. Note: I have printed…
More Bolt Sizes! Feel free to send me a message if you have any special requests. Sample image is printed in clear PLA, 0.25mm layers, 40mm/s print speed on my Micromake D1 (Kossel Delta Clone). Updates New double nut, I messed up the…
My grinder just dumps into a bin so I have to pour coffee grounds into my portafilter and it is a messy task. I saw a similar funnel on reddit and decided to make one myself. I had to sand it lightly to get a perfect fit. 51mm is the…
This is a replacement for the stock facial interface for the Quest 3 that works like the one on the Q-Pro. I use it with the Meta Quest Elite Strap, and I also use a chinstrap. For more info on the chinstrap see my chinstrap cup project.…
I needed a place to store my Quest 2 and get it off the table. Works great. I would print it big and fast. No fine details to worry about.
This is my first attempt at a geared rope maker. Notes: The screws are pretty weak, so you may be better off with nylon ones. At 0.25 layer height, the screws should not need post-processing, but the threaded holes will. For best results…
Simple ear muffs that make the Q2 sound great! They increase the volume a great deal, but they do not prevent others in the room from hearing the sounds. I use them with the Elite Battery Strap, but they should work with the default strap…
New version of my old knurled bottle for 2023. Much better design from what I have learnded over the years. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.25 with 3 shells Notes: When you first…
This is my attempt at an arrow clip for holding 8 arrows in a 4" thin-walled PVC pipe. The idea is to use two of them to keep the fletching from getting damaged. The one with the set screw is designed to have an arrow shaft or dowel in…
This is a knitting project holder that I made for a friend. Designed to be printed vertically, 0.3 layer height, 3 bottoms, 0.5 line width, 2 shells. One is 15.1cm x 2.3cm, the other is 10.6cm x2.3cm. Print Settings Printer Brand: Prusa…
Just a simple trash diverter for a downspout. Print Settings Printer: Micromake D1 Rafts: No Supports: No Resolution: 0.33 or as large as your nozzle allows Infill: Solid via 2.0 mm shells (5 shells with a 0.4 nozzle) Category: Outdoor &…
This is a simple chinstrap cup. When combined with some 2mm cord and some plastic clips, it makes a Quest all-day wearable by taking all the weight off your face. I made it for the Elite Strap, but it should work for any strap with a…
Simple bracket for holding the Oculus Quest and controllers. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.3mm Infill: 20% with 3 shells Notes: I used 3mm to reduce the…
This is a simple display stand for my Oculus Quest. To make it a bit easier to print, the base can be attached by screws or printed in place. It can be made with and without the wide base. I prefer it with the base. There are 6x1 threaded…
My take on a Ready Player One extra life game token. Print how the halves, glue them together, and spray them. The simple version was created from scratch with fonts, not by extruding an image of the PRP logo and coin. It should print…
I have seen many styles of sharpeners in videos and I decided I needed one. You will need 2 skateboard bearings, (8x22x7), 2 M6x20 screws, and 2 M6x15 screws. I use nylon socket-head screws. Printed screws would likely split on the layer…
Simple print for making a custom pair of mouse-ears. Simply print and hot-melt glue on-to a head band. Category: Costume
This is a quick and dirty trash diverter for a downspout. The initial version takes a 2"x3" input, and outputs to 4" rounds. As with all 3D prints you use outside, you either need filament that can handle UV or you need to paint it with…
Some more versions of the my threaded box. The box is 50mm across and 30mm tall. Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10% Category: Containers
Simple models that can be attached to the Q3 with good quality double-sided tape for those that break the connector. I would use the tape that comes with a bottle surface prep liquid. You may need to print with a brim since they have such…
Simple heart boxes using vase mode. The mini one is about 26mm across. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 with 0.8 line width Category: Containers
Simple funnel for filling reuseable K-cups. The lower the layer height you use, it smoother the slant will be. No support should be needed. I used food-safe PLA.
A simple impeller a guy on reddit needed. Category: Parts
This is a simple bracket designed to hold a Quest 3 and the Q3 Controller Dock. I printed it in PETG, but PLA should work fine, I would just be sure to use at least 4 shells. It is now available from Slant3D Teleport: Simple Quest 3…
A simple way to mount an 13Ah Anker "pillow" battery on the Quest 2 Battery Strap. It provides longer play-time and acts as a counter weight. You will need 5 M6x1 screws. 10mm long screws should work but at least one of them should be…
I find these helpful when it is time to change my scooters oil. Oil Filter Wrench - I printed it at 0.2 mm layer height, turned off infill, and set enough shells to make it solid. 24 mm Box End Wrench - the oil-screen plug is sealed by an…
Another version of my 50mm threaded box. The box is 50mm across and 30mm tall. Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10% Category: Containers
This is a battery holder for the Oculus Quest that fits the XT Power 20000 pack. The battery opening is 84 x 22 with an 11mm radius on the ends. It holds the pack securely and is comfortable and stable. V8 has pointed arches and that…
Here are some spinners I put together for friends. The filenames are cryptic on purpose. Please do not use copyrighted names in comments. They are sized for a snug fit on a 608 skate bearing on my printer. I also use superglue on both the…
This is a simple bracket designed to hold a Quest 3 with pegs to hang the controllers. Should work with any headset. I printed it in PETG, but PLA should work fine, I would just be sure to use at least 4 shells. Now available from Slant3D…
Simple clips to attach 22mm thick round-ended-brick, and 22mm/33mm lipstick battery packs to the back of the Oculus Quest head strap. Features: Holds the battery away from your head! The brick-style clips use hair-ties or elastics so it…
Print, glue into cups, double-sided tape to headset.
This is a heavy-duty battery holders for the Oculus Quest 1. AUKEY USB C 10K version has battery opening that is 75.5mm x 14.5mm. XT Power 20K version has a battery opening that is 84mm x 22mm with an 11mm radius on the ends. The Anker…
Simple handle for 90deg USB cables. Fits cables with 8mm barrels. Simple and fast to print. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.3 mm or smaller Infill: 3 perimeters, no…
I got tired of the Q2 being so front heavy, even with a 10AH battery as a count weight, so I ordered a hard-hat chinstrap from Amazon and made a new plate for my battery mounting clips to attach it. If you want just the chinstrap…
This is a simple replacement for the plug for the charging port that came with my water-flosser. It needs to be printed in a flexible filament, and is made for a 2mm pitch mini-bowtie plug.
This is designed with a tight fighting lid that will really only work in a flexible material. I printed it in generic TPU and it works great.
These are all currently available results.
