Counting matching models…
A very simple "vase mode" basket print. I wanted a quick waste bin for my print scraps (and fails). Fusion 360: - Polygon - Sweep, taper, and twist 3D Builder: - Simplify (for low poly look)
Replacement battery cover for the TCL Roku RC-AL5 remote control. This model appears to be dimensionally accurate but is a very difficult print. It requires supports at any orientation. If you have a successful print and fit, please let…
A half-shell case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Hard shell design: Fills-up the MK3S build space (1-2mm to spare) Prints…
Put all your spare disk drives in one place. Use this to organize a spare parts pile or line up your cold spares for your NAS. Fits 8x 3.5" disk drives and 3x 2.5" disk drives. Print settings: WARNING: Large print across entire build…
A few vases created while learning Fusion 360 form modeling. Each vase is provided as a normal, hollow print and as a solid for “vase mode” printing. Scale to suite your needs. Vase mode tips for MK3S 0.4mm nozzle: Start with Prusaslicer…
This model sits on the tray inside the center armrest of a Subaru Outback (2022). Has dividers intended for a wallet, glasses, and coins (depending on model). Multiple variations are provided as STL. Original Fusion files also provided.…
Tidy up your memory stick drawer and put all your SO-DIMM modules in one place. This SO-DIMM case holds 12 memory modules and even comes with a lid! Use with 30MM height (DDR2, DDR3, etc.) modules (or stretch the model a bit in your…
A half-shell soft case for the Galaxy Tab S6 Lite. Covers the back, sides, and corners. Also provides a bezel to protect screen when device is face-down on a surface. Soft shell design: Fills-up the MK3S build space (1-2mm to spare)…
If you have long bolts securing your porcelain throne to the floor, and you don't want to hack-saw them off, then this extra-tall bolt cap may be for you. Covers bolts up to 34mm tall.
The anytime sniffling, sneezing, coughing, aching, stuffy head, fever, so you can rest without heartworms medicine organizer. If you keep frequently-used medicines, vitamins, or other remedies in an easy-to-access location, this tray may…
UPDATE: Uploaded new wheel STL. Replaces a wheel clip (and optionally a wheel) on the top rack of a Bosch dishwasher. The clip fits OEM wheels too. Printing: Clip Support everywhere 0.2mm layer height, 3 perimeters, 100% infill Slow down…
A drip pan designed for the in-door water/ice dispenser of some Whirlpool refrigerators. Certain models place the water dispenser so close to the front, it ends up dripping down the door. This tray catches those drips. A sleeve for a…
Tidy up your memory stick drawer and put all your DIMM modules in one place. This DIMM case holds 12 memory modules and even comes with a lid! Note: Some DIMM's with large heatsinks may not fit properly. The lid is optional to accommodate…
A air redirection hood for a floor-installed register. The register drops into the hood. Register dimensions supported: Above floor: 13.5" x 3.75" Duct opening: 12" x 2.25" Two options available… single piece for large print volumes.…
Keychain designed as trinkets for a 2021 graduation party. A few different versions with different text available. Fusion 360 file also available to make editing the text a little easier. Tip: Change the color at the text layer for a neat…
A new model of the Sterilite gasket box latch (2022). This version includes chamfered pin edges for easier assembly. Built in Fusion (file provided). Great fit and durability printed with PETG 0.4mm nozzle, 0.2mm layers. Print advice:…
I have an annoying desk drawer that keeps opening on its own. I could fiddle with the desk or the drawer itself to help the problem… but instead I put a piece of tape on the drawer to hold it shut. This latch replaces the tape. It can be…
This standard size 2 gang wall plate accommodates: 6 keystone modules 1 decorative rocker switch (or a module sized the same) This was designed to host 6 keystone models and also an opening to pass HDMI cables through. This is to avoid…
This hanger is custom designed for the aluminum railing on our deck. It is a single print and snaps into place. Supports are needed on the baluster clip. The railing has the following dimensions that apply to this design: Railing: 35.2mm…
Can raise something with a square corner off of a surface. Like a desk riser. This project designed to lift a desktop PC 2cm off of a surface. Provided STL file is scaled for 20mm x 20mm corner and a 20mm lift. Provided gcode is a set of 4.
A little tray to hold all your take-out sauce packets in one place. Designed to fit in the fridge door. Simple model, easy print.
This insert fits wall plates that accept a standard-sized deco module (like a decorative rocker switch). The flexible bristles (printed with TPU) maintain a visual seal while passing cables through. Two parts include the flexible layer…
The original “Jewellery Tree” by Clive Harris is fantastic. But, as I sliced those models, I noticed the tray did not have super clean surfaces and I prefered an ironed surface. And I prefered owls. This collection includes a new (from…
This is a 24-port keystone patch panel sized to fit 2x between 16" center 2x4 studs in an unfinished wall. Two STL files are provided -- mirrors of each other for installations that need up to 48-ports between two studs. This model is not…
This shamrock bobblehead toy is easy to assemble and comes in two versions: Two-sided shamrock that prints with supports One-sided shamrock that prints without supports Thank you to 3DPrinty for the OpenSCAD parametric spring:…
A replacement foot pedal for the Tramontina 13 gallon step trash can available from Sam's Club. Two versions of this print are available: Standard version (does not fit the MK3S+ print volume) Chamfered version (fits MK3S+, matches OEM…
A curtain holdback hood for a floor-installed register. The register drops into the hood. Register dimensions supported: Above floor: 13.5" x 3.75" Duct opening: 12" x 2.25" Two options available… single piece for large print volumes.…
This model adapts the Dyson DC14 Turbo Tool (~2006) to the Dyson Ball Animal 3 (UP30 - 2022). Snaps into place via the retention clips on the Turbo Tool and the Dyson Ball Animal 3, respectively. Use supports for recessed tube and cuff…
UPDATE: 2022-03-14 – STL files have been rotated and settled for easy slicing. NOTE: Performance may be affected by print quality on the battery tracks. Clean up any PETG clumps or boogers. This AA battery holder ensures the oldest…
This stand holds a Dell Thunderbolt dock (model WD19TBS) and a laptop. Notes Room for front USB cables attached to dock Cables can be routed through stand Does not block airflow Leave laptop open to act as a second monitor Printing Does…
UPDATE: 2022-03-14 – STL files have been rotated and settled for easy slicing. NOTE: Performance may be affected by print quality on the battery tracks. Clean up any PETG clumps or boogers. This AAA battery holder ensures the oldest…
Designed as a Mother's Day gift to organize canine oral care products (toothbrushes, toothpaste). The insert is removable for easy hand washing. The divider is also vented to possibly reduce “funk” build-up.
"Tick, tick, tick, tick, tick." That's the sound of my Chrysler 300 while I'm rolling down the street. The sound is the result of the hubcaps bouncing around on the wheel rims. They do not fit snugly to the rim so move around in the wheel…
Shift interlock latch lever replacing original part 924-706 68088259AB. If your mid-2000's Chrysler/Dodge cannot be shifted out of park (P), this part may be the problem. A replacement part can be found at your online retailer of choice…
A cup to hold the Amcrest 1080p (ASH21) camera with adjustable pitch. A solution for aiming the camera down (over a ledge) without the need to mount it on a veritcal surface. Legs can be assembled with feet inward or outward – depending…
This is a replacement fill cap for the Revgear 42062 free standing heavy bag. This kickboxing bag sits on top of a plastic base that is filled with water. The cap covers the fill spout. Note: If possible, remove the rubber gasket from…
A simple anchor plate for cable ties. I had some existing power strip holes in the back of my desk and wanted to reuse them to help with cable management (aka - out of sight, out of mind). Screw this to some hidden surface behind a desk…
Holds a small sign, 120mm wide by 20mm deep/long. Designed specifically to hold a sign designed by BestOfBee and sold on Etsy. Prints with no supports.
For use with First Alert CO400FF carbon monoxide alarm. Adapts the new model screw holes to the wall anchor spacing for a previous generation model. Possibly useful as a template for your own situation.
Please, pick up after your pooch.
Backplate anchor designed to secure Justin's Google Wifi Mount to a drop ceiling tile. Justin's mount link: https://www.prusaprinters.org/prints/6374-versatile-google-wifi-mount-wall-or-ceiling-any-or Hardware: M3 bolts w/ nuts recommended
This model replaces the plastic door sleeve found in a S3877 Sentry fire safe. It is provided as single part and a multi-part models. Single part – in an MK3S+, must be printed vertically and rotated 45 degrees (build volume corner to…
These are all currently available results.
