Counting matching models…
Hello, today I prepared for you remix of nice 3D model of Toothless. The original model has marking and different color of the left part of the tail. This was an imitation of the injury from the first film. I removed this mark so I could…
Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…
Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…
Here you are the 5th part of my Jawa-ČZ 250/353.02 build. Hope the 4th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com The 5h part consist a big…
Finally I bring you the last part of my built. After this part you will have a complete 3D model of the SOLO bike. Of course, if you also want to own a sidecar or a winter fairing, you need to continue to persevere in the construction…
Here you are the 7th part of my Jawa-ČZ 250/353.02 build. Hope the 6th part was fun for you :) https://www.printables.com/cs/model/802455-project-jawa-cz-kyvacka-25035302-part-no6-rear-mud As usual the model part consist a big parts but…
Hope the 7th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.7 - Wheels od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay…
Hope the 8th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
Here you are the 4th part of my Jawa-ČZ 250/353.02 build. Hope the 3rd part was fun for you :) https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo The 4th sequel is quite comprehensive, so pay…
Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…
Here you are the 6th part of my Jawa-ČZ 250/353.02 build. Hope the 5th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com…
Today I bring you my remix of very nice jewelery box. For correct dimensions you have to print at 120%! For main parts I reccomend use 15% infill, for watch holders you can reduce infill to 8% After printing, glue the legs from the bottom…
Hello I prepared the skull cover of the towbar ISO 50. I recommemd ASA or PET-G and 3-4 perimeters. 15-20% infill.
Hello. Here is continuation of my biggest project - building of Jawa-ČZ 250/353.02 Kývačka. Free 3D model of the bike is available here: https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame For today…
Hello. Today I prepared Benny the space guy form The LEGO movie. Benny is approx. 45cm tall. Scale 10:1. For print you do not need MMU unit and the glue is not needed also. Because it is quite big guy I recommend use 3 perimeters, 15%…
PET-G or ASA is recommanded, 100% infill
Hope the 2nd part was fun for you :) https://www.printables.com/model/862690-sidecar-velorex-560-part-no2-connecting-rods As usual the model part consist a big parts but the very small also so pay attention to the description and attached…
My remixed Ikea Lack enclosure
Concealed installation triple box for separate frames . The axial spacing of each box is 84mm! = Not applicable for common frame. The individual boxes are connected at the top and bottom, so there is no twisting during installation into…
Hope the 1st part was fun for you :) https://www.printables.com/cs/model/861669-sidecar-velorex-560 As usual the model part consist a big parts but the very small also so pay attention to the description and attached pictures. As usual be…
Hope the 3rd part was fun for you :) https://www.printables.com/model/888136-sidecar-velorex-560-part-no3-the-sidecar-body-and As usual the model part consist a big parts but the very small also so pay attention to the description and…
Hope the 5th part was fun for you :) Sidecar Velorex 560 - PART No.5 - Interior od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay attention to…
Hope the 4th part was fun for you :) Sidecar Velorex 560 - PART No.4 - Wheel suspension + main body holders od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
Hello, today I bring you the continuation of my biggest build - project of Jawa-ČZ 250/353.02 with sidecar. The bike is here: https://www.printables.com/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame The sidecar is here:…
Modular cutlery organizer. All modules are joined together by the connecting pieces into one unit. Dimension is 36x47x6cm. Step file is included = you can modify the model for your needs. All blocks are adjusted for Prusa Mk3 plates. PLA,…
This stearing wheel knob is designed for stearing whell with outher diameter 365mm and 25mm diam in cut. The clamp is printable as a one piece, situated on plate according picture. The ball with pivot is printable on place also. Gap is…
Hope the 1st part was fun for you :) https://www.printables.com/model/1108824-trailer-pav-40-part-no-1 As usual the model part consist a big parts but the very small also so pay attention to the description and attached pictures. As usual…
Skull for shifting rod. It is prepare for rod diameter 12mm and for inserting M12 nut during printing. Therefore during slicing you have to put break for nut inserting into the skull. I recommend PETG, 0.2 layer, 40% infill, 2-3…
Concealed installation double box for separate frames . It is remix of my triple box model. https://www.printables.com/cs/model/808492-concealed-installation-triple-box The axial spacing of each box is 84mm! = Not applicable for common…
PLA, 2 perimeters, 10% infill, 0.15 layer should be sufficient. part 01 - 3x part 02 - 2x part 03 - 1x The manual for assembling is attached in the pictures.
I created a stylized model of a riding motorcyclist, which is loosely inspired by the world-famous sculpture by the sculptor Otakar Švec - A motorcyclist from 1924. It can serve as the basis of your winning cup, as a gift or just as a…
Box for 1 switch/control lamp/emergency switch/key switch.
Box for3 switches/control lamps/emergency switches/key switches.
Material: PETG or PLA, 15% infill, supports are needed only on part “vizualizer1” You need 5 pcs neodym magnets 6x2mm and super glue for fixing magnets on the correct place. The glue is no needed for installing on extruder of course. This…
This X-vizualizer belong to my vizualizer for the extruder. see here: Extruder vizualizer od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com material: PETG or PLA, 15% infill no supports I uploaded 2 versions of stl.…
Box for5 switches/control lamps/emergency switches/key switches.
Here you are spare parts for the most popular children toy that is produced 40 years (1985 till now). In the past there was produced Tatra in 2 variants. an excavator dump truck Today, only the dumper variant is produced and the excavator…
Obrtlík se skládá ze dvou kusů, které se do sebe zasunou, aby se eliminovala nutnost tisku na podpěry. Doporučuji tisk z ASA, PC nebo alespoň PET-G s plným infillem.
This is the printable box for Pragotron/Elektročas/IBM pulse generator. use PETG, 0.2mm, 350g, full filling The main power supply is done by 24V external source (either use a 24/2A rectified transformer or the original Pragotron ZZ24…
I created a stylized model of a riding motorcyclist, which is loosely inspired by the world-famous sculpture by the sculptor Otakar Švec - A motorcyclist from 1924. And I used it for decoration of a great book stoppers from DerKimKim's…
I recommend PET-G/ASA/PC 3 perimeters, 50% infill. For assembly you will need 4 pcs of the screws M3-8mm. New handle is reinforced.
Cover for PS-1 movement of the industrial clocks Pragotron / Electrocas / Chronotechna / Jednotny cas PLA / PET-G, 3 perimeters, 20% infill
Today I prepared for you small kid's chair. The dimension is for approx 2 year old child. I recommend PET-G, 5 layers, 8% infill. The chair dimensions correspond to Prusa XL plate. In case of smaller printer you have to cutted it in the…
This time I have prepared for you a model of the DKW 300 Luxus motorcycle, nicknamed Blutbase (blister) for its bright red tank. The motorcycle was produced between 1929 and 1933 and about 6000 units were produced. The model itself is…
These are all currently available results.
