Counting matching models…
19th Mar 2026: added an (less aggressive) alternate sear lifter. Use this if you are having issues with the blaster slam firing automatically when the slide returns to its original position. ___________________________________________ For…
Extended the frame plate to secure the bottom handguard to the rest of the frame. Created a custom angular mag (6 dart capacity). For the extended frame plate use two M3x8mm screws after drilling 2mm holes in the bottom handguard. Use the…
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
Added files for regular ontos as well. These are experimental as I have not tested these. _________________________________ I found the trigger pull for the normal Ontos to be too tough when using 1.6 springs. The plunger head, catch,…
The files are uploaded for 32-35 plunger tube ontos and 35-38 plunger tube ontos. The files for 32-35 ontos have not been tested as I don't have that. The files are compatible with existing ontos. You would need to replace the center…
Remix of foxbat muzzle with a ex bcar thread. There are two versions: Monolithic muzzle Two piece muzzle (attached with 3 M3x6 screws) I modified this for the AK mod hardware where the barrel extends about 3 cm from the front of the…
Muzzle for Sidetrack inspired by Ace of spades hand cannon from Destiny. Print the Muzzle and shroud on the face vertically (as shown below). Use brims where necessary. Uses the same hardware as side track with an additional two m3x5 or…
19th Apr 2026: New optimized ram designs for slightly higher added- Use high flow ram for 788 springs, use standard new ram in case you want a more sturdy ram. Both should work fine for 788 springs. _________________________ A relatively…
Decided to personalise my foxbat by adding a inlay. When printing the sign, enable thin wall detection while slicing the file. Also you need two of the signs one in normal orientation and one mirrored. I used superglue to fix them to the…
Decided to personalise my foxbat with a warhammer inquistion seal. There is also a version with a skyrim inlay. The inquistion seal may need slight sanding to make it fit (depending on your printer).
These are all currently available results.
