Counting matching models…
Most of the packets for my kitchen/baking needs come in standard sizes. So I quickly drew up a model to store them in my cabinet. (The compartments are 65 mm x 20 mm each in clearance and 60 mm deep. If your packets differ, you can simply…
So, I quite liked Lukaku's original design, but I decided to try to improve on it a bit. Changes remodeled mostly by the original dimensions overall design a bit sleeker (imo) with filleted edges and a more integrated upper part cutout in…
I have lost my case for my swimming goggles. They are the AquaSphere Kayenne, rather big – so your's should fit, too. I designed the case to have really good ventilation, the only things in my bag that could scrape against them are bigger…
Original Design: https://www.thingiverse.com/thing:4853032 I quite liked the design but I wanted to use threaded inserts to mount the AirTags securely to a bag. Parts needed: 4x M3x8 screw 4x M3S (short, 4mm) threaded insert assembly :…
Overview Modified pixelwave's beautifully designed model to suit my needs. The holes on the side of the cage were lowered to allow for right-side up mounting. As per the original model, you will need 3 mm threaded inserts to secure the…
I remixed this from cowanrg's model on thingiverse. The old one was made for a pegboard, and I needed some way to fix it to a board of plywood. What I changed: Removed the pegboard hooks added holes for standard M5 heat set inserts added…
Idea I liked the original model and wanted to remix it to a drawer handle (mainly for the IKEA Expedit/Kallax Inserts). Design I remade the whole model based on the original dimensions and adapted it for back-side mounting and threaded…
I wanted a compact wall mount for the Wera Joker wrench set (with 11 wrenches) and found Gluon45's model on thingiverse. The only modification I made was to add some holes to screw it to a wall – even if it does look a bit sketchy, it…
Idea I have a stack of Euroboxes (2x 30x40 cm) on rollers in my workshop. i wanted to put a plate on them nice and secure to use them as an additional work surface. Printing Simple and easy print, printed it in PETG, 3 perimeters. Nothing…
Original design: https://www.thingiverse.com/thing:4852416 additional Parts needed: 4x M3x8 screws 4x M3S threaded insert (short version, 4mm length) 1x Apple AirTag Information : I needed a method to mount an AirTag onto an object via…
Idea A simple way to secure the tripod legs with velcro straps because they always tend to flop around uncontrollably. Design This is my first design done in Fusion 360. The original design I used as a reference had lots of supports to…
Idea I wanted a box to store the JetKVM device, along with the cables you get in the box and maybe a few more (adapter for Micro HDMI, RJ12 cable etc). Design In the center there is a place to put the device. The space on the outside is…
Idea I wanted a way to mount the remote to my desk (built out of 4040 aluminium extrusions). Additional Components 1 Magnet 6x3mm (but up to a length of 6mm should be fine) To Mount: 2 screws M5 button head (ISO 7380) Maybe some glue to…
Remix of Chrismettal's remix. First contact with FreeCAD so my model is not perfect. I tried to remove the opening for the square nuts and increased the diameter of the screw hole to 4mm to fit a standard M3 threaded insert. I used…
Idea This model's idea is a rebuilt and (hopefully) improved version of: https://www.thingiverse.com/thing:3964197 While I liked the original model and for this version used most of its measurements, I had a few issues with it and even my…
I just drew up a quick design in F360. Fit is quite good and the spring tension of the tool keeps it in the holder. I designed it for 3 mm countersunk screws; 2.5 mm should also work fine :)
For travel and transportation I put my EQ5 tripod in a slightly padded tripod bag. After a few flights, I saw that the pin on top of the tripod had damaged the bag from the inside. This cover protects the tripod top and the bag. It it…
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
I got the Pferd Key File Set (#265) and needed a wall mount for them. I just drew up a quick design in Fusion 360; the fit may be not optimal but it does the job for me. For mounting two 3mm countersunk screws are used. If you need any…
I got the Wera Joker wrench set from the 2022 advent calendar. They sell the same set now as #05020314001 in their standard color scheme. Other tool sets may use the same clip, I'm not sure of that. Designed a wall mount for that, affixed…
First of all, thanks to js500 for the work with the insert. I redrew the card holder model in F360, using most of the original dimensions. Lettering is now more akin to the theme of the game Handle should provide better grip The cutouts…
I modified another design to accustom the FP-30 PSU and made a few changes for my needs: the whole design is slightly longer because of the longer PSU it's mirrored, so the mains cable comes out towards the left leg of the piano when…
After repeatedly knocking over my beloved Mate Mateo silicon gourd, I decided to make a simple stand for it. It doesn't perfectly complement the shape of the cup but I think it's still good enough for everyday use with a small gap of 1-2…
I didn't like the screwed in PTFE coupler (a hassle to feed filament through) and wanted a quick swap feature. So I remade the upper part of the adapter plate in F360 based on the measurements of the old design and mashed the magnetic…
Idea I use the lightweight Osprey packing cubes for storing my laundry during travel. I often had to look into many cubes to get the items I want, so it seemed appropriate to label them accordingly. Design Simply drew up a design in F360.…
Idea The old problem persists, the Mate Mateo silicone yerba mate gourd is easy to clean and nice to use, but it's prone to tipping. My old holder solved this problem (kind of), but I wasn't happy with the design. With now better modeling…
One of my server cases (Chenbro RM42300 and RM41416) was missing the handles on the front. The respective L-brackets on the side were still mounted to the case. You can probably fit those handles to other Chenbro cases, too. Required…
I have a set of four Bessey EZS11-4 clamps (they are sold in packs of two) and needed a wall mount for them. I drew up a quick design in F360 and used 3mm countersunk screws to bolt it to my tool wall. As the clamps are really light, I…
Idea A simple mount for a single round loctite bottle to mount with screws. Printing Standard settings Assembly Mount with two 3 mm countersunk screws to the wall.
I wanted the holder to be turned, so when I rest the pinecil, I have more room on my work area. Did a quick modification of the original BASE with the large cutout (no syringe holder). Notes: After printing, I saw that I had a small bump…
After I built the Adafruit Heat Set Insert Press and got my CNC Kitchen Insert Tips (with the appropriate self-printed case, of course) I needed something to store the case. This is just a frame to screw into the bottom plate of the Heat…
I have a Chenbro RM42300 case here in my homelab, and at the moment I need something to have it standing upright. Without modifications, the case would rest on the mounting flaps of the case in the front. I didn't opt to go for a fully…
Idea I have a Noctua NF-A14 5V PWM which came with a USB adapter cable. As I use it as a desk fan, I found the connectors quite ugly and probably a point of failure. So I made a cover which should be completely removable without damage to…
I wanted a printable label for my 5000 and 6000 series B+W cases. After a few iterations I arrived at this. I of course included the f3d file, so you can adapt the text to your liking by customizing the sketch. Color change is done by…
Based on the original model of the Prusa MK3s+ (probably all MK3) right hand side Z covers and the magnetic PTFE coupler from Line Arc Line. The Details As I have a magnetically coupled bowden setup on the extruder, which was feeding to a…
Idea An adapter to mount a 1U-sized 19" power strip to a desk/holder/setup. All the strips I've seen so far have the power cord exiting directly in the middle of one side, so that has to be taken into account. To print I used PETG with 4…
I wanted a holder/mount for my Sortimo T-boxx/L-Boxx inserts as I use them to store some inserts and screws. I used some SPAX Pan-head screws (3x20mm, 0207000300203) to secure the holder to the board. Works fine with my 3D printed Sortimo…
Idea After installing a few IKEA Kungsfors racks on my kitchen wall, I noticed that the hooks on the bottom were sometimes a bit hard to manage when something was placed on top of the rack. Also, the top surface isn't smooth, especially…
A friend of mine asked me to make a dust cap for his DreamStation Go respirator. After a few tweaks I arrived at a simple design which fits tight enough and is easy to remove. As an additional feature I put a hole into the handle to put a…
These are all currently available results.
