Counting matching models…
I saw this lid holder for insulated mugs and decided to make something similar from scratch. Lid holder for insulated mugs by Sneezy | Download free STL model | Printables.com Much better than having these scattered all in a drawer or…
I like the look of hex mesh, so I have started parameterizing them in Fusion 360 starting with cylinders. I have included 100 mm Diameter and 70 mm *.stls for: Open both ends cylinder Cylinder with a solid bottom Cylinder with a hex mesh…
This is a simple double sponge caddy for a sink with a wide divider, e.g., fits our Kohler ceramic over cast iron sink. It is printed in PETG. The sketch from Fusion 360 shows the general fit dimension. The "Sink Profile.stl" is…
If you have French Cleats, this is a nice option to store your Dewalt batteries. You can grab batteries with the covers installed and throw it throw them in your tool bag or box and not worry about shorting out the contacts. The cleat is…
This is a workable trash can that fits a t-shirt grocery store bag. When I increased it's size from Handy Handcrafts original, https://www.printables.com/model/713165-galvanized-trash-can the it failed at the sharp corners along the top…
4 inch OD pipe clamp for mounting or supporting object on a support post. Could be used on 3.5 inch diameter sch 40 PVC (4 inch OD) as a pipe support I'm using it to mount attach wood to a 4 inch OD jack post. Features: Counter sunk holes…
This is a general purpose tile holder that pretty much fills the print bed. I have print them in PLA with no (0) bottom layers which eliminates the warpage issues for me. I did the design with Fusion 360.
I designed this for my 2014 Forester based the design I saw from EJ @EJ_558281 for their 2015 Subaru Outback. (See EJs at https://www.printables.com/model/418710-2015-subaru-outback-gps-mount). I expect this will fit some other models.…
Made a standing Water Level Meter for the Forbidden Island game from GameWright® Games. It also has a spot to hold each of the Treasure figures that were included with the game. It does not require any supports and you can use different…
Covers a 4 inch diameter hole in ½ drywall. Nice snug fit, but I probably a little too stiff to be easy to remove and reinsert with PLA. If that is your need, you might try reducing the walls to 1 layer above the cover face and printing…
Wanted something I could use in my chair to put pressure on a trigger point in my back and gluteus medius . There are some other items available to print, but this has a large base and works in a chair or bed without tipping over. Printed…
Holds 10 pairs of scissors or whatever. Small scissor fit 2 to a slot. Mesh design cuts down on filament, doesn't catch as much grit inside and just generally looks better to me. If you have a some stringing, just blow the model off with…
I use this box as a template and edit it as needed to add internal spacers, text on the top, etc. Here are the parameters: I think most are self-explanatory. The "Clearance" parameter creates a small where the lid slides into the box.…
Great saw, odd size dust port. This is printed in flex fits great/snug. Won't work with a sold material like PLA. The color slips over the lip on the saw's dust port outlet. So you would need to redesign it to have a split color. I plan…
UPDATE: Added taller versions for the Teaspoons, Soup/Ice Tea and Fork Holder. Teaspoons now hold 32 and each of the others hold 16 of each type. Also slightly increased the length of the Soup/Ice Tea spoon holder to accommodate longer…
This is a dovetail bar (½ 14 degree) that takes a Flat T-Track nut which you can source at Taylor Toolworks.…
Pretty simple. It fits and holds about as well as the fitting you can buy for this pipe, which is to say snaps on but is pretty loose. This is drainage pipe that water leaks into, and once it's buried in gravel, it has nowhere to go I…
Simple holder for grocery store TShirt bags for trash (See Liner). Also included is a shell and lid, but you can just use the insert (or just the shell and lid). Hook the bag handles through the v shaped cutouts on the side of the liner…
This drainboard is flat on the top and bottom of the wavy section, but sloped inside so the water will drain. There are 3 versions: Just the drainboard Drainboard with has small tabs on the bottom that will catch the edge of a sink or…
This is a set of legs to go under a Dixie Cup dispenser. They make it easier to wipe up water splashed on the counter top without getting on and wicking up the dispenser. I don't know if we have Dixie Cup branded dispensers, but I suspect…
This is a post support with flange mounts on the ends. It uses a bike seat post quick toggle clamp to lock in a position. I built these make and adjustable infeed support for my miter saw. For my case I just let the support post pass thru…
Enlarged the holes in the shield to support larger straws. (10.1 mm as printed)
Hex mesh holder for grocery store TShirt bags for trash. This fits in my trash can model but more for stand alone. Although it saves filament it takes much longer to print that the liner included in the other model, and it is just hidden…
Just a handy spot to clip one of the nozzles to the vacuum's tube. The wall mount only holds 2 of the three provided attachments so I just keep one on the vac. Prints fine without supports. The nozzle attachment is pretty specific to this…
I ended up with a batch of magnet folding casement window handles. This is a facade for my National Window actuators that mates them up with the handles. You could use the facade with new plane handles to dress up your actuators (cover…
These work great as a combination battery cover storage on a French cleat. Requires supports, organic work well. Used lightning infill to cut down on material. Not a lot of structural demands on this part. PETG or PLA is fine. UPDATE:…
A little stand to hold 2 strips of 5 contact lenses. The Alcon Total lenses come in a box of 90, so you can have a few on your counter versus the big box. Summary lists other brands that fit without scaling. Probably works with others,…
This is an adapter that fits over the Core One Advance Filtration unit and: Holds in place with friction, no magnets Prints without supports Adapts to a 100mm ID pipe (dryer duct) Has additional adapters for 50 and 80mm ID pipe/duct. The…
Simple design, quick print. Should be able to scale it up or down on the printer bed pretty easily as required. As designed it goes on a 9.6mm thick shelf. Added a reinforced one for 5mm shelf If you want them a little sturdier add to the…
These are screw mounted clips that house spring loaded plunger pins. See photos for pin dimension. See the photos below. My use case was a vent for my printer but would be the same for a portable AC unit. Although these plunger pins are…
These are all currently available results.
