Counting matching models…
I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…
Reuploaded model. https://www.thingiverse.com/thing:956039
note: ‘base_open’ was updated. There was a small extrusion error in the top groove. Printing: nozzle: 0.6 mm layer height: 0.3 mm max. XY dimensions: 200 mm max. Z dimension: 240 mm base: black PLA line width: 0.8 mm bottom layers: 4 top…
I wanted to relocate the stock fan to have better access for maintenance. I tried many mods and designed new ones. Including TPU ducts, because every available duct deformed on the first layer of a big PETG print. Also any restriction or…
Printing: nozzle: 0.6+ mm caddy1: PETG layer height: 0.3 mm line width: 1 mm top solid infill line width: 0.6 mm bottom layers: 3 caddy2: (x2) PETG layer height: 0.3 mm line width: 1 mm top solid infill line width: 0.6 mm top,bottom…
Main body: 0.6 mm or bigger nozzle recommended PETG Spiral Vase mode 1,2 mm line width 0,3 mm layer height (can be lower) Use inside/outside brim Tip: 0.4 mm nozzle TPU It can be ‘press’ fitted or glued with CA (super) glue.
PETG 10% infill 3 perimeters @ 0.45 mm line width 4 top, 4 bottom layer @ 0.2 mm layer height Paint on support under the hook only.
This cover meant to extend the life of the masks. This mask cover is optimized for TPU 95A filament. Nose section can be sewn together with a few stiches. Welding also can be used. Project file also included.
Recommended Print Settings : Nozzle : 0.4 mm Layer height : 0.16 mm (Variable layer height for Core1 and Core2, with 0.16 mm maximum) Material : PLA and/or PETG Wall loops : 3 Top Shell : 6 layers Bottom Shell : 4 layers Infill : 25%…
Reuploaded from: https://www.thingiverse.com/thing:3703468 (second version) Original creator suggest 100% infill, but printed fine with 15%. Also 0.2 mm layer height gives a great result. Some areas are very small on the first layer. I…
TPU bicycle light visor to create a cutoff line beam pattern, prevent glare, while maintaining visibility. Use white, translucent TPU 95A. eg.: eSun eTPU. Tested on a Velotech 1000LM light. PS: You may need to print it thicker or choose a…
Arch: PETG. 0.6 mm nozzle Layer width: 0.7 mm variable layer height ~ 0.15-0.30 mm (top and overhang: ≥0.15 mm) fuzzy skin: contour, 0.3/0.3 mm Mouse ears on the corners walls: 2 layers top/bottom: 4 layers infill: 10% (in retrospect:…
This remix only contains the ‘plug’.
Printed with PETG Bottle holder: 0.6 mm nozzle Vase mode, 1 mm line width 0,3 mm layer height 4 bottom layers Plate: Vase mode 0.6 mm nozzle Vase mode, 1,2 mm line width 0,3 mm layer height 3 bottom layers All 3 layers are concentric but…
It helps to mark the shape of the stickers. It is meant to be used with a 0.5 mm mechanical pencil. Sticker size: nominal: 15,8x15,8 mm Stencil cutout: 16,05x16,05 mm. 0,2 mm layer heigth is optimal.
Loose-fitting dust cover for your consolized Anbernic RG35XX H. Enlarged, loose-fitted version of "Simple Cover for Anbernic RG35XX H by amd" with an open backside and vents along the edges.
Cable manager box for Anbernic RG35XX H and Ugreen CM219 USB hub. It's a prototype. It was printed with PETG. The lid can be printed in vase mode with 0,6 or bigger nozzles. (line width is 1 mm) You may need: -self adhesive feet to make…
Print in PETG with 0.4 mm nozzle Upper tube section should not contain infill, only walls. Slice it accordingly. M3x12 or M3x10 non-countersunk screw needed. Unscrew the suction cup from the ball joint and place it in the handle. Align…
Material: PLA, PETG, TPU (magnets maybe fit too loose) Recommended print settings: 0,4 mm nozzle 0,2 mm layer height 4 walls 5 bottom/top layers 25% gyroid infill No supports No brim Additional materials: 2pcs. D4 x 1,6 mm or D4 x 2mm…
These are all currently available results.
