Counting matching models…
Overview This customizable, parametric FreeCAD model features a simple box with a sliding lid that clicks into place. Features Fully parametric design Easy-to-print design without the need for supports Snap-fit sliding lid mechanism Ideal…
Design Requirements A coin holder that fits in the Gridfinity slot in my drawer FreeCAD Parameters Nickel =21.2mm Dime =18.03mm Quarter =23.88mm Loonie =26.5mm Toonie =28mm Tolerance =.51mm Should be easy-enough to update the FreeCAD file…
Just a straight forward slim credit card wallet. Print out the pieces and glue together Version 2, which snaps together can be found here And Version 3, is parametric in case you want to have more or larger cards can be found here
Simple one wall design can koozie. The idea is that the less plastic that is touching the can the better it will be insulated as air has a lower thermal conductivity. It has fairly tight tolerances to keep the air in the pocket isolated…
Design Requirements A simple, usable wallet that's easy to print, requires no glue, and can be adjusted to fit any size requirements. FreeCAD Parameters Note: Not all parameters will work as expected, I'm not planning on putting any more…
Have been using it for a while now with no issues, seems to be holding up well. Freecad file included if anyone wants to remix it. A more parametric version of this wallet can be found here in case you want to have larger cards, or more…
This is a print in place model that uses a cam lever to attach a can sized container to a bike. I've printed all of the components PETG and with no support and they seems to work pretty well.
This is a modular watch stand I designed for charging a Garmin watch using the charging cable that comes with it. It seems to work with both a Garmin Fenix 6 and 7, not sure if it will work with others. The mounting bracket is kept…
Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…
A tool for filling capsules, Currently sized for 00 Capsules, but could easily be modified for other sizes. I have used the 5x5 one to fill some supplements and I was able to get a run of 150 capsules filled fairly short order. I have…
This case is designed to hold a Boveda recharge packet and a damp paper towel. Once placed in a in a ziplock bag, it allows the packet to recharge while minimizing damage to the Boveda packaging. For humid environments replace the wet…
Design Requirements Needed a case to hold my earplugs when traveling FreeCAD Parameters Earplug Outer Diameter =19mm Earplug Depth =25mm Hole Diameter =14mm Hole Depth =22mm Wall Thickness =1.5mm Cap Overlap =15mm Tolerance =0.15mm…
This model is a simple card holder that can be resized using the included FreeCad file. I've added a couple of presets for testing the tolerances as well. I tried to get them just right, but you might have to fiddle with them depending on…
This is a simple print for mounting your bike light, or anything that fits the 20mm width, to material. Works like a button, and is fairly easy to install with a needle and thread. I found using a pair of pliers to push the needle through…
Design Requirements I wanted a case to protect the stylus when moving around, with the option to keep the AAAA battery outside of the stylus in case it leaks when not in use for a long period of time. I am able to easily remove the nib…
A simple case for the HP Wireless Rechargeable USI Pen and it's accessories. The cap is a pretty tight fit, and the nib holders need to be reamed out a bit, but other than that it works well enough for me. I've included the FreeCAD files…
Design Requirements This model was created as I was struggling to find a can holder that would fit on my canoe for a trip I was going on. It needed to be strong, easy to move around the boat, and hold a can fairly well. First Impressions…
This is a magnetic holder for a cheap 3" by 5" ish notepad I picked up from the grocery store. The freecad file might need to be adjusted to fit your specific notepad.
A simple drill guide that I created to re-drill some holes into cabinet for hanging the door. How to use Simply make a mark on the edge of the cabinet where the holes should be centered and then drill. Printing Instructions Can be printed…
A simple cantilevered table hook I designed to help get my bags and gear off the table while still accessable and in my line of sight. The bigger one also would work as a grocery bag hook. Design Considerations My main consideration was…
Simple Riser to allow me to use the horizontal charging coil on my phone charger with my Pixel Buds Printing Pretty straight forward, as long as you don't print it upside down it shouldn't need support. Maybe I would use the adaptive…
These are all currently available results.
