All models

Print-in-place, Wavy design Box

Print 3+ perimeters, ~24%+ infill. file sizes now smaller **added plain, untextured version and version with no text.

Sliding Cigarette Box

Items should import in the correct print orientation. Glue the base to the sleeve to complete. Allow glue to dry before insert sleeve. Ensure enough perimeters so no infill is required (solid print).

Airless Ball

Good luck printing this! I suggest you create a flat surface for the build plate by cutting a small portion off the bottom or add supports (you probably want supports either way - block supports on the inside). Print in TPU if you want to…

Christmas Bauble

Print 0.16mm, might need supports or maximise cooling fan.

Little keyring Pill Container

Separate the halves, print upright, no supports needed. Best in TPU/PETG so it doesn’t snap easily.

Fire Axe

Prop full size fire axe.

Knurled Keyring Pill Stash

Print the base and lid upright, the other piece upside down. You want support for the lid brim but can probably just use bridging for the keyring loop. No other supports required. Best printed 3 perimeters, 30% infill, 0.2mm or finer.

Pill Stash Keyring

Small jar that can attach to a keyring.

2 Position Tablet Stand (upto iPad Pro 12”)

Print on its side, 3 perimeters 0.24mm or finer. Print solid.

Massage Roller

Print 0.2mm, 20% infill, no support required.

Glasses Case - print-in-place.

A print-in-place case for eye glasses/sun glasses. Best printed 0.16mm with 3 walls for strength, 20% infill. No support required. Careful when moving the object in slicer, move both parts as one or they will not align correctly.

Adjustable Tablet Stand (upto iPad Pro 12”)

Separate the two items, print 0.2mm, 20% infill. One of the photos shows the print orientation.

Joint rolling travel case

Print everything 0.2mm, 3 perimeters, petg

Tobacco Case

Print solid 100% infill or enough perimeters. 0.2mm layer height. No support required.

Mini Swing-Bin

All items should import in correct print orientation. Print 0.24mm or finer, 2 perimeters.

Pencil Case

Seperate the parts, print 3 walls , 20% infill 0.2mm or finer.

Knurled Jar (Improved)

Large knurled jar with carry handle. Print lid upright with supports, none required for the main body. Print 0.16mm, 3 perimeters @ 0.76mm line width. Bottom thickness is around 2mm.

Doob tube - screw lid container for fat spliffs/joints/blunts.

Mini Medieval Mace

Be careful moving the object on the build plate or you will mess up the alignment. Best printed 0.2mm or lower layer height, 10%+ infill.

Pocket Humidor

Portable humidor for rolling tobacco (may be suitable for cigars). you will want to support the roof of the drawer space and either support the top of the insert or trust bridging to work out! best printed 0.2mm layer height, 3 perimeters.

Smoker’s Rolling Case - print-in-place

Keychain Stash

A 3MF file is supplied. You must tell the slicer it is a multipart model to separate the pieces, this is not print in place! Separate the pieces, all print in their upright positions, no support, 3 perimeters, 50% lightning infill worked…

Decorated, small slide case

Print 0.2mm or finer, 3 or 4 perimeters so it is solid.

Print-in-place, ribbed, snap-shut Case.

Print in place case. *careful moving the model on the build plate, ensure both pieces are selected so you do not misalign them. Recommend; Print 3 perimeters, 0.16mm layer height, 60% lightning infill for the base, 20% triangle infill for…

Slim Flexible Wallet (TPU).

Print in TPU on it’s side, cut small tabs when complete. Best printed 0.2mm layer height, 4 perimeters.

Sleeve case for eyeglasses

Orient objects as shown in one of the images for correct print orientation. Print 0.2mm, 3 perimeters, 30% infill.

Mint Dispenser Box

Print with fine detail.

Rangefinder (Leica) Style Camera Model

Model of a camera. Print 0.12mm layer height, support under lens and strap loops

Fancy Doob Tube

Print base upright, flip the lid to print on the flat surface. Best printed 0.12mm or finer. Roll the threads around a wax candle before first use to reduce the chance it gets stuck on. After a few wiggles you should find it is a nice fit.

Small Knurled Jar/Pot/Cylinder

Place both halves flat on the bed, print at 0.24mm or finer. No supports required.

Folding Pocket Knife

I have laid out the parts for printing. Use 2+ perimeters, 0.1mm layer height, 50% lightning infill. (Print blade solid). Use small sections of filament to align for gluing (through the small holes. The small cylinder is the hinge for the…

Christmas Bauble V2

Print with flat surfaces on print bed 0.2mm layer height or finer. 20% infill, 3 perimeters. You will need small amount of support beneath the hook hole part and glue both together in post.

Hairbrush

Hairbrush parts should import in the correct print orientation. Parts slot together but you may want some glue to secure it. Print 0.2mm or finer, 20% infill

Witches Cauldron Candy Bowl

Drag lid away from cauldron in slicer. Print cauldron upside down - support handles. Print lid separate - right side up, support the brim.

Plant Pot & Saucer

There are 2 models in a 3MF file. Split the components to print separately. Ensure enough solid bottom layers so no infill in bottom (1mm thickness). 2 perimeters (or 1 thick one), 15% infill or 60% lightning infill.

Are you high? Trippy Sign

Print 0.24mm. Scale the model up a bit for best results (or just the z height).

Bongo Drum

Print drum skin side down 0.2mm layer height 3 or more perimeters, 10% infill

Pine-Cone Bauble

Bauble decoration for your Christmas Tree.. Print 0.2mm, 3 perimeters, 15% infill.

Nutcracker Soldier Tree Ornament

Support hat brim and beneath hands. Print 0.12mm, 16% infill, 3 perimeters.

Acorn container V2 (more acorn like).

Print 3+ perimeters, 100% solid infill. No support required. Recommend 0.12mm layer height.

Mesh Bulge Planter

A plant pot or bowl for stuff. Print 0.2, 3 perimeters+, solid infill.

Tea Jar

No supports for base, support the handle underside on the lid. The groove in the lid underside do not support or you will not be able to remove them. Bridging should be used. Print 0.28mm or finer, 3 or more perimeters/walls. *The…

Japanese Kiritsuke Style Chef’s Knife

Objects should import in correct print orientation. Ensure the build plate has cooled before attempting removal - you do no want to put any bend in the blades. Glue the knife halves together and screw into the handle. Ensure they are…

Nozzle Container

A 3MF file is provided. Choose which lid you want, “nozzles” or plain, delete the other from build plate, print 0.16mm layer height, ensure enough solid layers so the lid is solid no infill. 3 perimeters is recommended. 20% infill.…

Revolving battery (AA) carousel.

Revolving as battery storage. print 0.2mm, 20% infill. No support required.

Case for small roll-your-own Cigarettes

Concrete Ashtray Moulds (Print TPU).

These are untested but should work. Print from TPU/Flexible filament. Probably want 3 walls and 40% infill. Use mold release spray/product as we will rely on gravity and mold flex for demolding. I hear beeswax is good.

Hot End Cover (Ender 3 V2).

Print upside-down, 0.24mm, 10% infill. Mounts onto the x carriage rail secured by a screw through the slot. The screw slot allows you to raise the fan duct side by placing something in the groove it sit on (some tissue for example) if it…

Tray with clamp

Items should import in correct orientation. You will probably want to support the roof of the threaded hole. Wax the threads before attempting the first screw to prevent it sticking while you loosen it up after a few turns. Print with…

Vase Shaped Vegetable Mould

This is a vase mould to be placed around a growing gourd or similar vegetable to produce a vase shape which can be hollowed out, dried & used as such. There are alignment divets and grooves for string, rope or zip ties to secure it to the…

Elegant Vase

A Vase. Print 3+ perimeters. Ensure enough bottom layers that no infill is required (can cause leaks). Recommend 0.2mm layer height, 40% infill.

Acorn shaped keychain container

No support required. Suggest 0.12mm layer height, 3+ perimeters, 40% infill. Best printed in TPU or PETG.

Round Hairbrush

Ensure items are flat to build plate. No support required. Print 0.2mm, 20% infill, 3 perimeters.

Chess Piece (King) Bottle.

Print 3 perimeters, 20% infill, 0.12mm layer height. Support the cross on the lid.

Jewelery

Cntrl + a to move bracelets on the build plate or you will mess up the alignment. Print 0.12mm or finer.

Finned Vase

Decorative Flower Vase. *Added a V2 version I think has a nicer shape. Your choice.

Bicycle Handlebar Grip (26mm internal, ~120mm long)

Print in TPE/TPU. 2 perimeters, 20% infill.

Canister

Separate the pieces, print with 3 walls, 0.2mm or finer, 20% infill. Print the bottle top from TPU preferably. Support the loop of the bottle top. Should not need support elsewhere.

Large Twist Rib Vase

Print 0.24mm layer height, not vase mode.

Headphone desk clamp with anti-scratch pads (TPU required).

Print main body on its side. The anti-scratch pads should be printed in TPU. Should not need supports. File type is .3mf- you need to choose the multi-part option upon import or it will fuse the parts into one piece which won’t function.

Bag Mountable Container

Print 3+ perimeters, 60% lightning infill, 0.24mm layer height or finer. 3MF file provided. Separate the bodies if you wish to delete an object from the build plate.

Desk clamp to house over-ear headphones with a platform for a games controller or phone.

Clamps to your desk so you can hang headphones & place a games controller. You will need to support the underside of the headphone mount. Recommend 3+ perimeters, 50% lightning infill. *Image shows controller for demonstration purposes.…

Ribbed Planters

Import the model, delete the ones you don’t want, print using 3 perimeters, 30% infill. 2 objects are sturdy planters (not vase mode), the 3rd solid is for vase mode only, increase your line width for stronger part. I suggest minimum 3…

Magnet shut Case for small rolled cigarettes (print-in-place).

Diamond Bulge Planter

Print 3 perimeters 0.2mm, solid infill. Add drainage holes to the pot with a hot nail if you like.

Curved Ribs Pattern Slide Case

A .3mf file is supplied. The 3 files must be separated by the slicer. Print the tray part flat to bed (obvs), print the large lid on the flat edge that meets the tray section end (the other end is rounded, not suitable for bed adhesion).…

Jug

Will need support under the spout and possibly under side of the handle loop. Ensure enough bottom layers that no infill is inserted in the base (1.6mm thickness).

Twist Rib Planter

Print vase mode. Best results 0.12mm layer height, 6 bottom layers.

Screw Lid Jar (not for weed).

Adjustable Lamp

Print 0.2mm, 3 walls, 20% infill.

Birdhouse (2 piece)

Print 0.2mm, no supports required. Recommend petg. Zip ties can secure the roof. There is a hole for cleaning/shaking out beneath the removable roof.

Gem Tipped Spear plus mold.

This is a .3MF file featuring a 2 meter solid spear plus 10 numbered mold tubes that screw together to create a single 2 Meter long mold. Idea being to print the mould in PLA, spray it with mould release or oil or something, fill with…

Vinyl Record 45 Adapter

Print 0.2mm layer height, 2perimeters, 20% infill.

Waffle Texture Vase (not for vase mode).

Print 2 perimeters, 0.2mm layer height, 6 top & bottom layers. Infill 10% or none (check preview.

Proper Vase (not for vase mode printing).

Recommend Print 0.24mm layer height, 0.6mm line width, 2 perimeters, 15% infill. seal with liquid polypropylene if not water tight.

Stash buoy keyring

Print 0.2mm, 100% infill

Minirig Speaker Housing (fits minirig 3).

3MF file provided. You must separate the model into the 2 parts and orient for printing (body face down, back plate place on the large flat surface). Recommend 3+ perimeters, 0.24mm layer height, 60% lightning infill.

Plant Pot & Saucer.

Not suitable for vase mode. Print 3 perimeters, 20% infill, 0.24mm layer height.

A twisted Octogon based vase

Octagon based flower vase. Not designed for vase mode. Designed for 0.6mm nozzle, 3 walls at 0.76mm. Print solid.

Twisted Rib Vase

Ribs are ~1mm thick so I suggest making outer perimeter line width 1mm or 0.5mm depending on nozzle installed. Print 0.28mm layer height or finer. Ensure there is no infill in the bottom (increase bottom layer count if there is). If the…

Aeration Planter

Has a 0.88mm thick base and 1.2mm thick walls. Print 2 or 3 perimeters (depending on nozzle size).

Triple Dice Box

Import .3MF, separate the pieces, print 3 perimeters, 30% gyroid infill (so dice aren’t “weighted”). *Not print in place - separate the pieces and align to print orientations.

Lantern Vase V3

Inner vase has 2mm thick walls, recommend 3+ perimeters, 0.2mm layer height, 40% infill.

Chopstick Rest

Print 0.1mm, 4 perimeters, 15% infill.

Extending Phone & Tablet Stand

Objects should import in print orientation. Recommend using a brim. print 0.16mm layer height, 3 perimeters. No supports required.

Protective Case for Hercules DJ Control Mix

You will need a large printer or cut pieces smaller and glue in post.