Counting matching models…
STEP Files added! Original Designs by Daniel Noree Remix based on OpenRC F1 2022/2018/2017/2015 OpenRC F1 AERO Package: https://www.printables.com/model/469356-openrc-f1-aero-2223 For hardware needs please look here:…
This is a Remix of the OpenRC F1 car by Daniel Noree Video of car: Complete set of parts needed to build functional RC car. Not just the updated parts. Also contains remixed parts I prefered over the original Noree designs. All credit has…
These are all the parts I consider necessary to run AERO on your 2022 or 2023 OpenRC F1 car. The Aero package is “functional” it will provide some downforce, although not much. The 2 main Floor Pieces join together via print in place pins…
Mod of original hat and foot to make hat and boots
This is the Rear Wing designed for the OpenRC F1 2022 Car insipired by teh 2022 F1 cars Original files by Daniel Noree Follow along for more updated 2022 F1 car files
designed to interface with Weapons holster for Katana https://www.printables.com/model/201128-weapon-holsters-for-lucky-13-katana-and-pistols/comments/269527 Glue together and your Lucky 13 has a jet pack to take to the skies
Original Designs by Daniel Noree Remix based on OpenRC F1 2022 This is not the full part set yet, just the Basic Updates for 2023. OpenRC F1 2023 - Full Part Set to come! Floor Updates shown in Picture to come in OpenRC F1 AERO! Key…
Rocket Designed to fly off 29mm motors for best performance. The Rocket glues (super glue / CA glue) together The pieces stack from Top→Down as follows - Nose Cone, BS3, BS2, BS1, FINCAN Rail buttons can be mounted to the printed holes…
laser sword and handel,
Musical Instrument
Lucky 13 Hair Braid Requires 00A07 Armature Clavical to be printed repeatidly to make braid.
3D Printed Rocket designed to fly in your local parks. The easy to see orange streamer aids in locating the rocket should it get away from you! Dimensions: Length x Body Diameter - 13 x 1 inches Fin Root Cord - 1.59 inches Assembly…
This is the Front Wing & Nose designed for the OpenRC F1 2022 Car insipired by the 2022 F1 cars Original files by Daniel Noree Follow along for more updated 2022 F1 car files
4in Plastic Nose Cone Electronics Bay build This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false Designed…
Built around an Apache 3800 Weatherproof case from Harbor Freight. These Prints, combined with the case and electronic diagram and parts list will allow you to build a multi pad launch controller perfect to aid in launches for Boy Scout,…
The 2nd iteration of the PIXI Platform, designed to fly on 18mm motors its takes the standard A, B, C engines found at hobby shops and lets you take to the sky with the cool single print rocket.
OpenRC F1 2022 car updated chassis. PLEASE NOTE: The lid is typically held on by the turning veins which are not present on the 2022 cars so untill an updated body is done I have not determined how to hold down the lid Original files by…
EggTimer Tracker Box Build Video: I use the 0.28 spacers for the LCD and Audio Board mounting Spacer 0.44-Buz is designed to fit by the buzzer on the board Recommend using 7 slot picatinny rail 4-40 hardware is used for mounting all the…
The nose cones are designed to be a fast and easy replacement to the standard Estes Rocketry and other PVC Nose Cones. After Printing the desired nose cone the part may require cleanup with sandpaper and/or a file. This set offers 6…
Update of the OpenRC F1 Tires and Hubs to the 2022 F1 specs. Original Files from Daniel Noree Follow along for more updated parts for the 2022 Car Updated Rear Rims due to sizing error
Assembly Instructions avaliable at https://inverted-pursuits-lab.square.site/ Follow the instructions for best results! Additionally needed parts - 18in Shock Cord - Spectra is reccomended - BT-20 Motor Mount Liner - can buy from Estes -…
This model comes in 2 designs, with insert and without The design with insert means you'll need a 29mm or 1.145in phenolic or fiberglass insert to help insulate the print from the heat of the rocket motor. The phenolic tubing can be…
Spooler Adaptor
Please Fly under the supervision of a Certifying Rocketry Association such as TRA/NAR/CAR/UKRA This rocket is well equiped to serve as a L1 certification rocket within these organizations Powerslide is a 54mm rocket flying on 38mm Hobby…
Prints as 2 pieces that thread together
This is a reprint of the Wheel hubs on the car which now include the winglets seen over the front tires of the 2022 F1 cars. Original Files from Daniel Noree Follow along for more updates to the 2022 F1 Car
Stand Designed to work with the OpenRC F1 2022 car
This camera housing is designed to house the Estes Atrocam. There are 3 variations available in this download: 38/54mm, 3in and 4in diameters. This is an easy way to quickly attach a wonderful little camera to your rocket. Recommend…
Parts needed to build your own homemade rocket! Zip Files contains parts to diagram out your own rocket design!
Replacement Nose Coen for the Estes Vapor Model Rocket
Designed to fly on standard 24mm motors the FIREDRAKE is a capable rocket that can fly repeatedly and longer than standard paper tube rockets. Build Video of similar rocket: Look at other rockets like this:…
PIXI 1 is a tumble rocket prototype, it has limited success and is a work in progress. Please use caution when flying. A short section of BT-20 tube is needed to insulate rocket from motor heat. Video of flight Test:…
OpenRC F1 Wall Mount Hooks inside Front Nose/Wing
38mm fin jig can handle 0.125" and 0.25" fins
Formula 1 Alpha Tauri Logo
greeblessss
Replacement Nose Cone for the Estes Mean Machine Model Rocket
Cake Topper! Scale as needed to meet your needs. 50% Scale looks pretty good for a cup-cake
Magnet of Scuderia Alpha Tauri Logo
V2 of our Rocket Buisness Card Holder. A little more streamlined for hopefully better printing results.
VIPER is a partially 3D printed rocket. Flight Test: https://youtu.be/VS7LyfjCEJM BFTA and Core alignment done same way as marking out fins: https://youtu.be/_sWssDOyFms It requires a 3in phenolic tube 30in long as well as a 3in plastic…
Reccomend using 4-40 x 0.25in long hardware for all mounting and assembly
Business card and pen holder
organizer to mount to workbench or tool cart
simple jig for accurately cutting your Estes cardboard tube to length. Length can be adjusted using slicer cut tool if shorter length desired
Blank canvas to design your very own tissue box!
Replacement for Mach 1 Speed Demon Nose Cone
Pommel deisgned to fit 1in PVC Pipe for the purpose of Batuu Bounding at Disney Galaxy's Edge. Use this as a base to build your own Hilt to carry as you immerse yourself in the lore.
Proto-Pasta Spool Adaptor Jig Images describe how to make useful
Corner mountable pencil holder for workbench or tool carts
This is the way
Attaches to 3in PLM Phenolic Body tube and 3in PVC Nose Cone. Reuse Shock Cord Mount (BFTA) from VIPER 1. Flies on 1 29mm motor and 3 24mm motors Test Footage:
Verify with ease that your 20/20 extrusion parts will fit. Also a good check if you can print square without using much
For best results print at 125% of original size. Some text is a bit small before 125%
Potsie Name Badge
Print 2 of these, model is only a half and glue together. I reccomend using CA glue to bond. Drill holes as needed for mounting. In Pulse Autocycle use 3 short wood screws to mount the plate to the body of the vehicle. Should slide…
Clip Lights for Pulse Autocycles. Designed to work with Light The Night LED Strips https://www.ltnleds.com/ 2 Variants included, V2 designed to cover holes from old clip lights if they are not covered by V1
These are all currently available results.
